Mount-It! Ultra Low Profile Fixed TV Wall Mount for 13 to 32" Inch Screens, Slim TV Wall Mount Fits VESA 75 and 100 mm, Flush TV Bracket 0.55" Design with 60 lb Capacity, Built-in Bubble Level

Got this for a 32inch curve monitor for my home office and it is the perfect fit. super strong. Easy to install once you have a drill and know how to use it lol. The price for this thing was the best! Definitely worth it.

This works well and is easy install. All needed installation hardware is included. This is really designed for Tv's or monitors that have the wires coming out of the bottom. It's very close to the wall so wiring coming straight out of the back might not work.

Works great in tight spaces. A little hard to tighten the screws once the tv is on the mount but a little ingenuity and it can be easily accomplished.

The Mount‑It Low Profile TV Wall Mount is a great value overall. It was very easy to install, and attaching the TV to the bracket once on the wall was just as simple. Once mounted, it sits extremely close to the wall, which is exactly what I wanted for a clean, minimal look in a small guest room. The only drawback—and the reason I didn’t give it five stars—is that my TV uses M6 VESA bolts, and the mount didn’t include them. Even worse, the holes on the bracket weren’t large enough for M6 bolts to pass through. I had to drill out the holes myself. Thankfully, the steel is soft and drills easily, so it wasn’t a big problem, but I can see this being why some people return it. If the mount came ready for M6 hardware, it would be an easy five‑star product. Still, for the price, it’s a solid buy with a simple workaround.

Fit in a very small place. And works perfect. Very satisfied with low profile of the item. Very stronge, hold well look great. Very reliable price.

The mount itself is solid, low-profile, and works well once installed. My only complaint is that it doesn’t include drywall anchors. The kit includes hardware and instructions for mounting into a wood stud or concrete/brick, but nothing for drywall (which is quite an oversight considering it’s one of the most common mounting scenarios). If your mounting location doesn’t line up with a stud, you’ll need to make a trip to the hardware store before you can finish the installation. I initially tried using the included concrete anchors, but they aren’t designed for drywall. That left me with four unnecessary holes in my freshly painted wall because I had to buy drywall anchors and move the mount down about an inch to start over. This seems like a surprisingly large oversight for an otherwise well-made product. Drywall anchors cost very little, and including them would save many customers an extra trip to the store and a lot of frustration. 3 stars because the mount itself is good, but the installation hardware should include the parts needed for one of the most common mounting scenarios.

It keeps the (in my case) the monitor close to the wall and is easy to install to wall. The design for attaching the monitor to the part mounted to the wall is a great design. However, be aware that because it is so tight to the walls you have to plan well for cabling. I liked it enough that I bought a second one.

• I used this on a 27" Acer CB272. The setup was straightforward until I started getting the brackets on the wall. • Use your own wall anchor if you can. The anchors are cheap and the top anchor just spun with the screw. I had to hold it with a pair of needle nose pliers while I got the screw most of the way in. After I got it seated, the anchor was slide out of the wall by about a quarter inch. That meant the monitor was aiming down towards the desk. • To fix this I had to use some small washers and sheetrock screws to hold the wall bracket tight to the wall. • Then the issue with the design...even with the mount tight to the wall, when you put the monitor on it, it sags down towards the desk. The only way to stop that is to put in the two screws that hold the monitor mount to the wall mount. Unfortunately, at least with my monitor, that is nearly impossible to reach. A screwdriver handle pushes the angle too far to drop the screw into place with a driver. I tried lowering the monitor into place with the screws already in, and no go. I finally had to use a piece of tape to lower a longer screw into place, and tighten it enough to hold the monitor in place. What should have taken about ten minutes took almost two hours. The end result was what I wanted, but for all the options out there, you might keep looking to find one that doesn't have these issues.

This thing is tiny. Literally the VESA 100 square, by maybe 1/2 inch thickness. I mounted my Samsung Odyssey Neo 57 with this!! No problem. It can definitely handle a good amount of weight (says up to 60lbs and I believe it). I would buy this again for mounting or remounting my home TV panels. Would make for a nice tight wall mount.

The bolts provided were to short to engage the designated threads in the back of the TV. Also, the entire mount depends on only 2 screws into the wall. Not very secure.,

Da un efecto slim a tu monitor, el material de muy buena calidad, tienen nivelador para que quede derechito. Tomar a consideración que tus salidas de hdmi o cableado de tu monitor deben ser con los orificios viendo en dirección hacia el piso o laterales y NO hacia la pared ya que está muy estrecho el espacio qué hay de separación a la pared, si estos están viendo hacia la pared deberas comprar de una vez un adaptador en L para tu hdmi, usb, etc, y estos no se doblen y se dañen pegando en la pared. Un súper producto con Excelente calidad, espero que pronto los de surtan ya que quiero un segundo.

Simple mount but worked well for my purpose; easy install and puts the TV close to the wall. No issues

Good solid wall mount and keeps the tv very close to the wall. The plastic anchors that come with the set do not work for drywall, so you’ll need to find a different type.