TRX Training X-Mount, for all TRX Training Models

Stout Mount. See what I did there?There are other mounts that loo similar to the TRX mount, but they are not as stout as the TRX version. This thing is a beast!I have it mounted to two ceiling joist in my basement. These joists run the width of the house side by side. I mounted one screw into one of the joist, angled the mount so that I could mount the other screw into the other joist. This way the screws would not have any possibility of weakening the wood into which the other was screwed.I'm 225 lbs. The mount holds me on my TRX without issue. I do wish that TRX would produce a short strap for 7 foot ceiling mounts. I hate wrapping the strap included in the TRX kit several times around the mount to shorten sufficiently to bring the TRX up to the proper height. I swapped a strap from another function and drafted it into TRX use.The mount may be expensive, the basis for a four star rating, but I have no doubt it will hold me and my TRX for a long time without fail.UPDATE: The mount is still good, but one of the screws that came with the mount broke! I'm using the TRX this morning, doing Aussie Rows and I notice the washer was moving as I did the exercise. I figured, Must have come loose" and get a wrench to tighten it. Head of the screw came right off - it had broken from using the TRX.Beware of the hardware sent along with the TRX Xmount.

I stumbled upon the TRX bands while searching for something else, and I’m very glad I purchased them. The bands work great, and our whole family is now using them in our exercise room (there's a lot of expensive equipment in there collecting dust while we use the TRX bands now).I installed the bands in the ceiling using this TRX X-mount and it has worked perfect. For me, mounting these on the ceiling was much much better than attaching them to the top of a door. To me, it wouldn’t be worth it if I had to mount it on top of a door. The main exercise I wanted to do with these was inverted rows, and those require that you lay flat on the ground almost directly under the ceiling mount. So if I had mounted it on at the top of a door, then inverted rows wouldn’t have been possible (nowhere to put your feet / extend your legs).This mount easily bolted in to the ceiling joist in our exercise room (the joist was 1.5 inches wide and I used a stud finder to ensure I drilled into the middle of it for maximum stability). The mount is very very secure … doesn't move or sway at all.One suggestion – make sure you download the TRX Accessory X-Mount installation instructions. I just double checked, and for whatever reason the detailed instructions don’t seem to have come in the box? I found the online installation instructions by accident when searching online to find out what size drill bit to use to drill the pilot holes in the ceiling.The install instructions were especially helpful because they clarified the exact workout space I needed to take full advantage of the bands. The original TRX box said you needed a workout space of 8 ft deep by 6 ft wide, and I just assumed the 8 feet was straight back from where you mount them on the ceiling. But that’s not the case. The X-mount install instructions clarify that the recommended workout distance is 5 ft back from the ceiling mount, while leaving 3 ft in front of you (5 + 3 = 8 ft). Bottom line – For me, mounting on the ceiling was definitely the way to go. Otherwise, I wouldn’t have been able to do certain exercises (included the inverted rows that I bought the bands for in the first place). I also moved some other equipment around to make sure the workout space for these was the recommended width of 6 ft wide (3 ft on each side). Having the full 8 ft X 6 ft space available to work out in makes a big difference, and the ceiling mount is a ton better than a door.Very happy with this X-mount. Very easy to install and it has worked perfectly. Took less than 30 min to install (after I found the instructions :)

The description says “Country of Origin: United States.” That is a lie. On the mount in large letters in says made in China. I hoped a company started in the states would at least have the integrity not to lie about outsourcing production overseas. This is just an overpriced piece of equipment that can be bought for 1/3 of that amount from other manufacturers.

I know there are cheaper mounts out there, and I have not tried them. But, I can tell you that this mount is VERY solid!! make sure you use a good stud finder to find the center of the stud, drill a pilot hole slightly smaller than the mounting screw so you don't break the stud while crewing it in. It will be a mount you can trust your body weight against!

Well made product.I drilled 2 holes at the same length with the 2 bolts provided in the package and fixed with 2 plastic dowel pins to the ceiling (it is made from solid concrete).My weight is 114 kg(251 lbs), they said it's guaranteed safe for 250 kg(551 lbs) using their original bolts.Hope this info helps.

When compared with cheaper copies - becomes a no-brainer.Quality superb and hence much better value than price differential might suggest.

To install on wall or ceiling

Perfect for the TRX.

Very sturdy. Quality item