GOLDEN FIELD N-1 Mini ITX Computer Case Gaming PC Case Mini Desktop Computer Shell Cases Magic Black

Brilliant little case. After buying the Silverstone SG13 and the front panel wouldn't close, I ordered this. The SG13's layout is nowhere near as good as this. The SG13 had the PSU directly over the CPU, leaving only 60mm of clearance for the cooler. This lead to severe heating issues. That issue doesn't exist with this case, the PSU is situated at the front, with a pas through cord to the back of the case. This means you can fit a full size CPU cooler in the N-1 mini. I used the Arctic freezer 34 for reference. The SG13 also doesn't have a reset switch unlike this little gem! Love this case, can't recommend enough.

I bought this to reuse an old Mini ITX motherboard. At the price, I was not expecting anything special, but it is actually a nicely made case. It is a bit larger than some ITX cases, but that makes it easier to fit everything in and have some room to hide cables. It also gives room for even a triple slot graphics card to breathe. I used a standard ATX power supply and still had enough room to tuck spare cables away above the power supply. There is plastic filter material attached to the inside of the side grills. it would have been nice to have clip on air filters, but that is perhaps unrealistic at this price. I am not sure I would attempt a Micro ATX build, even though the description says it will take the smaller Micro ATX boards.

Not the best but for 30 quid, does the job for the living room build, pictures shows it will take a SFX PSU but I haven't got any holes to fit it, so my psu is in as good as it can be, only running 1 ssd not sure if trust a spinner above the mobo. Bit flimsy when you take the HDD braces off. Other than that does the job. Front intake fan mounts would of been nice

I have used this case with a couple of different boards now and its a fantastic little case for the money, you do need to add your own Power Supply and 120mm Case Fan but the case itself more than makes up for this, you have lots of space for airflow and the ability to route cables exactly where you want, the case itself is very sturdy and does not feel cheap in any way, supports several hard drives and has plenty of options for fixing them into the case.

Garbage. False description. Poor cover that doesn't sit flush even on arrival.

I've only just taken this out of the box, and I knew pretty much straight away I wasn't going to enjoy working with this case. Besides being flimsy, it twists as soon as you remove the case lid and top plate for the HDD's. I bought this case as it didn't appear too bad. And it appeared to have a good solution for mounting drives in various locations. How wrong I was, the idea is sound but I don't think I would trust the case to have 2 3.5" spinners above the board. Guess we shall see. I/O plate aperture caused the plate to flex (result in cut 1) when fitting it in, and popped out 2-3 times before fully fitting home. recommendations: steer clear. edit: In the end I returned the item for a full refund - just wasn't happy with the purhase.

It's a good case it was dented but I easily iced it very easy to build in

Poorly made falls apart

Una caja que me ha sorprendido gratamente. He podido instalar una placa microatx sin ningun problema, una fuente atx y un disipador de serie de intel. La caja sin nada no pesa nada, y con la placa, memoria, cpu, el disipador, un ssd de 240gb, la fuente atx y un ventilador de 12mm en la parte de atras no se nota nada de peso. Muy facil de transportar y además me parece muy chula. El nivel de ruido es inapreciable, claro que eso es debido a la calidad de ventiladores, pero el caso es que al estar bien ventilada por su perforaciones no hace falta tener los ventiladores a tope. Con pruebas benchmark de esrtes de CPU no he llegado a temperaturas superiores a 50º. El montaje es muy sencillo, y practicametne se pueden desmontar todos los paneles para que puedas acceder al interior. Viene preparada para montar SSD y HDD de 3.5. Lo malo es que solo puedes montar un ventilador de 12mm para sacar calor, pero haciendo un poco de brico se podrian poner algunos mas, aunque al no usar grafica (solo la de la cpu) no se calienta demasiado. La recomendaria a 100% y la volveria a comprar. Seguramente, en un futuro bastante cercano, compre otra para instalar un ryzen con apu.

Boîtier de très bonne qualité avec la possibilité d'installer une alimentation SFX la disposition des disques durs permettre de bien ventiler les divers composants de la carte mère je l'ai utilisé comme mini serveur

ケースはN1 マザーはASUS H310M -E R2.0 電源は玄人志向KRPW-N600Wの組み合わせで作りました。 マザーのATXメインコネクタと電源がぶつかりますがギリギリつけられました。 マザーからの距離は２枚目の通りとなります。 ご参考まで。

I give this case 5 stars, but that's because you cant just go with half stars. First off, great little case for the money. Builds perfectly without any issues. It also will handle a full size power supply, which I did not know 'til after I started assembling it with my mini power supply. It does not, however, have the air flow you would think it does. 1 fan port is not enough to get rid of much heat. Granted, I am using it as a gaming rig, but you would figure somewhere the designers would try this out in many applications just to see how it fares. I have my CPU on a single fan AIO, but my RX 570 is still air cooled. If there was 1 more fan port, heat would dissipate much better. Still, great case and small in size. Perfect for what I was after.

Das Gehäuse ist recht gut durchdacht. Trotz des geringen Platzes, was ein Mini itx nun mal mit sich bringt, kriegt man alles unter. Die "Bügel" für die Festplatten/ SSD's bieten Platz für bis zu vier SSD's oder 2,5" hdd's und dadurch das sie dann direkt an den lufteinlässen sitzen, werden sie auch gut gekühlt. Alle nötigen Schrauben und sogar ein paar Kabelbinder sind dabei. Aber auch optisch macht das Gehäuse in seinem "Retro" Design was her und ist ein schöner Hingucker auf dem Schreibtisch.