DEWHEL5cm Black Height Aluminium Steering Aluminum Spacer for Aftermarket Steering Wheel Hub Adapter Boss Kit

I ordered this to extend the steering wheel out just a little more to replicate the same position as the optionally available extended hub OEM steering wheel. The was just the perfect length, and contrary to some other reviews, the fit and finish were exceptional. In fact, the anodizing is so good, the horn button would not ground through the hub, so I had to run an extension wire from the button to the original hub. A couple of points to note when installing:1) As noted above, the horn button wouldn't ground through the extension, so I had to use the original MOMO button ring between the original hub and the extension (not between the extension and the steering wheel). This was a little odd and leaves a slight visible gap, but I didn't see any other easy way around it.2) The hub can only be installed in one direction due to the machined horn button "lip". There were no instructions provided so it was a little bit of "trial and error" figuring out which way everything should be installed. (the machined lip is installed outwards towards the steering wheel).3) The included wrench didn't fit the screw heads tightly, so I used my own allen wrenches to ensure the screw heads were not damaged or stripped out. (If I could deduct a quarter star for this I would do so)4) There were no washers include for the screws that mount the extension to the hub, so I had to provide my own. I did this to prevent the screw heads from marring or digging into the aluminum extension face and... (see #5)5) The holes for the screws to mount the extension to the hub (the unthreaded/untapped ones) seemed overly large and allowed the screws to "wallow around" in the hole. I was concerned that without washers the screws may be offset to the hole and disfigure or damage the extension face. I would have liked these holes to be closer in size to the actual screw thread diameter.Overall it works well, is machined and finished well, and looks good. Other than the items mentioned above it's a good value and does what it's supposed to do.

Good quality for the money fit my s20 great

Works and looks great

I've had this on my Miata for a few months and it's been great. It was very easy to install, feels sturdy, and pairs up perfectly to the hub and steering column. I drive my car hard and haven't had a single issue with this.One thing to remember - if you want to wire your horn or airbag defeater, I'd strongly recommend splicing a longer wire, as this will not conduct.

On my 2006 Honda Civic Si, I simply bought this to replace my quick release as for my track car I didn’t really need it as I never used it. But I had some complications with this spacer with my wheel, first I can no longer use my horn, I would need to weld or Jerry rig it somehow, the wheel I use a Momo 320mm and it uses a bracket that puts itself between the wheel and hub it can’t be used with this spacer, simply because it won’t fit the inside of the spacer, also the there was 2 bolts that had to be put at an angle on the spacer so I could “properly” connect it to my momo hub. Will definitely use this as a temporary alternative until I could order a momo spacer because it doesn’t fit perfectly and properly but still bolts down tight enough to use… overall I’m happy for the price, just didn’t fit as well as I expected…

Great fitment, did exactly what I needed it to do. I have a sparco wheel and hub adapter in my Miata. However it had the wheel too close to the wiper switch and turn signal switch, this adapter spaced the wheel out closer to you. Really having the wheel closer made it better overall driving. Fit and finish of this product was very nice.

Great part - well made - impossibly inexpensive for the quality. It does have an up and down orientation, so if holes don't line up perfectly, it's upside down.

It fit...quality item!

I used this to connect a Nardi Steering wheel to a universal hub on my C1500 pickup.So the way this is, the threaded portion that the Nardi would bolt to is on the wrong side, The Circular lip that sticks out needs to go into the Hub thats bolted to my C1500.It does have machined holes to match the Nardi wheel on both sides, but no threads. So i just bought some high grade Bolts and nuts to secure it. Still got the job done, and the length actually put the steering wheel in a perfect location for me.

Excelent hub

Hole pattern isn't well centered and fits neither 6 x 70mm or 6 x 74mm.The pattern dimensions are so off even the non-tapped bigger holes don't line up.Needed to drill new patterns to make it work.At least, it does have the advertised 5cm thickness..