OVERTURE Matte PLA 1.75mm, Low Warp & Smooth Finish 3D Printer Filament

I’m really happy with this filament. The color came out great, the prints looked clean, and it handled the details of my project very well. I used it to print a set of turtle-inspired hand display pieces, and the finished results turned out awesome. The filament printed smoothly without clogging, had great bed adhesion, and produced vibrant colors that really made the finished pieces stand out. I also liked how consistent the material felt throughout the print. The surface finish looked nice, the layers came out clean, and the final prints had a solid, quality feel to them. Based on my experience, I would definitely buy this filament again for future projects.

I decided to try this matte PLA filament, and it worked perfectly from the first print. The color looks great, and the matte finish gives printed parts a very professional appearance. I was especially impressed with how clean and consistent the final results turned out. As a regular Creality user, I do appreciate the convenience of their built-in RFID support with the CFS system. This filament does not offer that same plug-and-play integration, but that is a minor inconvenience compared to the excellent print quality. If you are looking for a high-quality matte PLA filament with great color and dependable performance, this is an excellent choice. Great compatibility and excellent value for money

My first time using this brand and very happy with Overture PLA. Prints nice, no bubbling from moisture, and no inconsistencies with the print. Spool was perfect rolled and no tangling during use. Pla has no odor and compatible with my Snapmaker U1. I did put the new spool in a dryer box for a few hours since the humidity level of the spool was over 25% out of the bag. Could be my moisture meter, but I'm not complaining. Also I like the label on the spool with the indicator for the weight and length left. Comes in handy when printing something that takes all days and determine if you have enough to finish the print or not. Good value and almost the perfect color for the kids dumpling box thingy.

Just WOW!. I'll update with photos of my prints later on. I've been searching for matte filaments and there seems to be limited options. Not only have i think i found it, i dear say i found my goldilocks filament. Ordering 3 more rolls next week as I've been printing 24hrs a day since i got it a few days ago. Excited to try other colors. Roll was nicely wound and print quality is astounding, printing is very easily and was dialed very quickly. and i have zero complaints so far. Layer lines are pretty much invisible even at .2 layer heights. .13 is jaw dropping. Been printing an order for a local hobby shop and they at first didn't believe it was 3d printed as it looked multitudes better than previous filament I've used on their order. I've been printing on my mostly stock ender 3 v2. Only modifications are z-brace rods, bltouch, dual z and printed z motor mounts. Printing here the update NY winter is usually challenging as where i print in my home can be as low as 10c ( will be finishing my enclosure soon). Saying that my only struggle has been minor corner warping and bed adhesion. but i doubt that would be an issue in warmer rooms. The issue has been resolved though as i really squish my first layer (leaves very fine elephant foot that cleans quite easily with a sharp hobby knife or 220grit sand paper) since i print 7-20 parts at a time. Can't afford failures. I am printing on the stock textured side of the ender 3 glass bed. For those with an ender 3 i do Hot end at 195-200c, 60c bed temp at 40mm sec (as i prefer quality over speed ) retract 6.5mm 50mmsec, default cura coasting settings and filament equalizer enabled. 75%-100% fan after initial 2 layers. I'd also like to add that my printed upgrades are done in hatchbox abs for strength and temperature resistance. But now any parts that aren't at risk of high temperature exposure I'm using this matte black pla because it looks that amazing and is suitably strong. If I run into any issues I'll update accordingly. Update 7 Days Later So i ordered this filament for an order for a hobby shop. Printing drag racing slot car stands. I printed 96 of these in 4 different filaments. After the first 28 this filament arrived and after the first test prints i was amazed and now only use this filament. I went through the whole 1kg roll in 6 days. Ordered another and already been printing into the 2nd roll. I've updated my nozzle temp to 210c and I'm using a .8 brass nozzle. A worth while mention is these stands i print they're only 3 bottom 2 top, 1 perimeter and 0% infill. And they're almost perfect, very light and just as strong as previous prints with .4 using 3b 4t and 2 perimeter. The watering can is from thingiverse and printed at 60mmsec, 3 bottom and in vase mode. Also worth noting i check filament diameter periodically as i go through the roll and so far it's been between 1.72-1.77mm. Overall still my new favorite go to pla. I definitely prefer a matte finish and this filament definitely delivers.

The wood print is great and looks really good depending on what design you use. I printed a young Groot and the minimal tree-supports pulled the hand off one side and the arm off the other. I'm no expert but I'm no noob either. I was careful but the filament is more brittle than most other PLA filament I use. Still, I'm overall satisfied with it.

The Tan Matte PLA is an absolute DREAM to print. It sticks to any bed I throw at it, never feeds poorly, and the prints come out incredible. I'm on my 3rd spool, and wish all things could be made in this filament. The only downside I can come up with is thinner things can be brittle, but that's what you use PETG and other things for.

Fantastic filament. Looks absolutely amazing! Matte appearance with the Light Brown color gives an appearance of wood, without the wood fibers to wear out an FDM nozzzle. I am printing on an Anycubic Kobra X using the default Matte PLA filament profile in the Next slicer, and it prints flawlessly! Overture is my go to brand for all my PLA needs!

I needed a filament that best matched Haze Grey and that wasn't going to cost me a couple hundred dollars for a color calibrated filament. US Navy Ships are painted in 2 colors on the exterior, Haze Grey and Deck Grey. The grey color you see when you look a Carrier or a Destroyer is Haze Grey, Deck grey is a darker grey and is usually painted on the floor of traversed spaces aka where a sailor may step on. I needed something that was close after a lot of research I bought 3 grey PLA's and of the 3, this was the closet in color. The ship I printed was 1/700th scale using a .2mm Nozzle and a .08 nozzle layer height. I used an Ender 3 Pro and I printed on a piece of G10 heated up to 60 degrees. I had lot a bunch of trouble getting this to stick at first. I refuse to use glue sticks, hair sprays, etc to make them stick and I almost caved here. I think the problems with getting this to stick deal with the smaller surface area of a .2mm nozzle. I found if I used a brim of at least 8mm in diameter then I had a much better chance of getting it to stick. if you look at the one picture you can see my thumb, to get an idea of how small some of the parts were. I had some stringing on some of the smaller parts but because of how long these take to print and the fact I knew I was going to do some post processing I wasn't too worried. I also tried some larger prints using a .6mm nozzle and these had no issues at all. I printed some PCB din rail holders since I already had this filament queued up and the filament had no issues with sticking or stringing. The matte color does a really good job of hiding the layer lines you can still see them in the right light or up close. This is the first time I've ever tried this brand. I generally stick to the same 1-2 brands that I know and trust. I have mixed feeling amount wether I would buy more from this same company. on the one hand I had a lot of trouble when printing really small but on the other with larger nozzles I've had no problems. this is problem due to a lack of experience with printing really small, fine detail models.

Manufacturer included some Easter eggs inside - an attachable print surface, and little measuring/removing tool for prints. PLA looks nicely manufactured. Quality goods!

Viene mal enrollado, durante la impresion se sale del carrete y da problemas de extrusion. No creo volver a comprar esta marca. Pesima adhesion

Great prints, used it on bambulab P1S with AMS, works well in AMS in its original cardboard spool, no clogging

Ich habe das TPU Highspeed Filament von OVERTURE in der Farbe leuchtblau auf einem Flashforge Adventurer 5M Pro getestet und bin insgesamt sehr zufrieden. Druckverhalten Das Filament lässt sich mit einer 0,4‑mm‑Düse bei 225°C Nozzle und 40°C Heizbett zuverlässig drucken, liefert aber auch bei 250°C noch vernünftige Ergebnisse (darüber habe ich nicht getestet). Die Haftung auf dem Druckbett ist sehr gut – teilweise fast zu gut. Besonders dünne Drucke haften so fest, dass das Ablösen schwierig sein kann und gelegentlich zu Beschädigungen führt. Supports lassen sich bei 0,31 mm Abstand ordentlich lösen, darunter kann es unter Umständen etwas schwiereiger werden. Allgemein sollten allzu filigrane Elemente, die Supports benötigen, vermieden werden. Materialeigenschaften Das Filament zeigt je nach Druckparametern sehr unterschiedliche mechanische Eigenschaften: - 15% Infill, 4 Walls: gut biegsam, erinnert an dicke Einmachgummis. - 7% Infill, 2 Walls: extrem weich und hochflexibel. Selbst nach starkem Biegen oder Quetschen kehrt das Material zuverlässig in seine ursprüngliche Form zurück – ideal für flexible, strapazierbare Bauteile. Leuchtkraft Das Material ist ein echtes Glow‑in‑the‑dark‑Filament: - bei Tageslicht wirkt das Filament weiß mit leichter Transparenz - im Dunkeln leuchtet es hellblau Am besten „lädt“ es sich durch direktes Sonnenlicht, danach leuchtet es die ganze Nacht hindurch gut sichtbar. Verpackung & Handling Die Verpackung war einwandfrei, der Versand schnell. Typisch für TPU zeigt das Material eine gewisse Feuchtigkeitsanfälligkeit, daher ist trockene Lagerung empfehlenswert. Fazit Ein hochwertiges TPU‑Highspeed-Filament mit starker Leuchtkraft, sehr guten Druckeigenschaften, hoher Flexibilität und beeindruckender Formstabilität. Die extrem gute Betthaftung bei dünnen Drucken ist der einzige erwähnenswerte Kritikpunkt, liegt aber eher am Material (TPU), denn am Hersteller/Produkt. Insgesamt ein vielseitiges und zuverlässiges Glow‑in‑the‑dark-Material für funktionale und dekorative Projekte.

Elastisch, etwa wie ein Hartgummi-Reifen. Lies sich mit Bambu A1 problemlos verarbeiten.