PowerMadd45490 Black 2" Riser Kit

Very easy install on my 2024 Polaris Rmk Khaos Slash 155. Bolts were plenty long. With low bars already on it, it’s the same height as factory high bars without having to spend hundreds of dollars to swap it out. I wouldn’t run much more than a 2” riser to avoid extending cables as with the 2” riser, cables are stretched but have some play still.

Works as expected

I wanted to get a 2 inch rise and these were great. It did not require lengthening the cables. Just right for what i needed.

Bolts are not the correct kind or even long enough. Should bot have come with allenheads. Yes I did order the correct kit for my machine.

2” makes the bars much easier to ise

Bolts supplied not long enough. No locking nuts either. Bought some and installed with no issues.

Work perfect

2018 Polaris RMK PRO 800 Axys:This fit with out extensions on the cables, but, I had to reroute the stock brake line. Basically it was moved around back of the coolant bottle giving enough slack. Made a mess doing it too because I should have emptied the fluid first. Thought I could move it quickly, but the banjo bolt was not easy to get threaded with the washers on. End results were eventually good!On another note: Last one I bought had poor quality bolts, so I replaced them with grade 8. This one however, came with much higher rated bolts, but I reused the polaris nuts as they were nylon locking and provided ones were not.