






Desertcart purchases this item on your behalf and handles shipping, customs, and support to OMAN.
💧 Stay dry, stay ahead — the WaterBUG AUTO handles the flood so you don’t have to!
The WAYNE WaterBUG AUTO is a 1/4 HP submersible pump delivering up to 1900 GPH with automatic on/off functionality. Designed for rapid water removal from basements, yards, and flat surfaces, it extracts water down to 1/16 inch. Featuring a corrosion-resistant brass outlet and a multi-ring suction strainer to prevent clogs, this pump is assembled in the USA and backed by a 3-year warranty for reliable, long-lasting performance.





| ASIN | B08D1NW7HZ |
| Best Sellers Rank | #16,485 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #65 in Utility Pumps |
| Brand | Wayne |
| Brand Name | Wayne |
| Color | Yellow |
| Customer Reviews | 4.2 out of 5 stars 304 Reviews |
| Flow Rate | 32 gpm |
| Horsepower | 0.25 hp |
| Included Components | WAYNE WaterBUG Auto On/Off Water Removal Tool |
| Item Dimensions L x W x H | 11"L x 11"W x 10"H |
| Item Type Name | Wayne 57736-WYN1 WWB Waterbug 1/4 HP Auto On/Off Water Removal Tool, Yellow |
| Item Weight | 8 pounds |
| Manufacturer | Wayne |
| Manufacturer Part Number | 57736-WYN1 |
| Manufacturer Warranty Description | 3 Year Manufacturer |
| Material | Brass |
| Material Type | Brass |
| Model Number | 57736-WYN1 |
| Number of Items | 1 |
| Power Source | Corded Electric |
| Product Dimensions | 11"L x 11"W x 10"H |
| Product Style | WaterBUG Auto |
| Specific Uses For Product | Inside, Outside |
| Style | WaterBUG Auto |
| UPC | 040066107497 |
| Unit Count | 1 Count |
| Voltage | 120 volts |
D**R
Runs slow with low water, water in the vent holes by power cord or rain may be required to arm it.
This review is for the larger more expensive, WAYNE - WaterBUG AUTO 1/4 HP 1900 GPH Auto On/Off Submersible Pump with Multi-Flo Technology. I have a small area near a foundations that collects water that has no where to go but under a house; depth of water before crisis is about 6”, a couple of gallons max. The pump appears in operation to be dual speed, low I suspect for when there is low water levels and then hi speed, full submersion). Low can be tricky to initiate, dripping some water on the 5 water vent holes near the power cord, seams enable operation when you have above minimum water height but you cant get it to start otherwise and want to see if it is operational (I do not need to do this later, if it rains even days later, water goes away; All I know for certain is that it is finicky for initial operation, water in those holes seems to get it to operate with a valid water height). In this state, I can feal operation with my hand as a vibration, not noise. Water flow is slow during low operation, probably a few gallons per minute, not 1900 (which on my application would be a under a second of run time if true). Probably a self protective mechanism. Of course the manual could simply tell us the theory of the sensor operation, but it is an information void, mostly concerned with you not killing yourself. You can prove Hi speed operation by filling your sink with water and submerging the pump, after you’ve dried off the kitchen cabinets, I came to the conclusion that maybe it can pump 1900 GPH! It does seem to pump faster given the water height, and may not merely be a two speed system as the product in description implies. From what I observe, water pump will not function if water height is under ½” height, and it does turn off appropriately in the interim; no motor vibration. Does seem to keep up with rain, dark suity water but not mud. I will likely need to clean the sensor section, not certain this uses a float to detect water height (you can turn it upside down, and it does not start, but maybe it would if you dripped water into those 5 holes). So far 5 stars, much of the above was to convince myself that it does work. This could benefit with a LED to confirm power (red), water detection (amber), and run state (green); or a descent manual. So far it reliably works for my application.
F**0
Great for outdoor yard flooding
Worked well for our on and off yard flooding during rainy season. The auto on/off gave peace of mind that it would do its job when necessary even while we were asleep. Used in a dirt patch and on grass and did not clog.
W**L
works great
works great
W**S
It works!
Definitely helped with the rainy season and my basement flooding. Definitely beat paying $1,500 for a company to come out and install flap that was never installed to prevent rainwater from pushing back into my basement. Kept it dry for sure. Def recommend.
C**Y
Regretted buying this junk
Junk. I bought this pump in preperation for storms that have hit the Los Angeles area. It turns off after water has been removed, which is an issue with the flood rains we've had. To turn it back in, you MUST disconnect it. Frankly I think the unit may be faulty but I've no way to prove it. Regret buying the unit...Waste of $.
P**O
1900 gpm??? That's pretty optimistic 😊
The pump auto off feature works as described, shut off pump when there is <1" of liquid. The 1900 gpm rating is a bit optimistic however. I used the pump to drain my 1900 gallon swim spa and after seeing a little better than a trickle, decided to use a 1-1/2" siphon hose to speed things up. In all fairness, the pump was connected to a 100' x 5/8" garden hose which probably restricts flow... I calculated flow at approximately 150 gpm with the above hose. In the future I'll probably adapt the 3/4" NPT to a 1-1/2 sump pump hose and get the higher flow as advertised. Edit: The above calculated flow was approximately 150gph, not gpm. I have since purchased a 3/4" x 2" npt SS nipple to improve flow. I removed the 3/4" x 3/4" garden hose adapter and threaded in the SS nipple. I used a 3/4" to 1" reducer , 90 degree pvc fitting and a small piece of 1" pvc sch 40. I had to turn down one end of the pvc so it would sleeve into standard 1-1/4 corrugated sump pump hose. After running some test with this adaption, the pump now produces ~10 gpm or 600 gph. This is a 4x improvement over the garden hose but still only <1/3 of the claimed 1900 gph output. Still fits in original box with adaption.
A**E
Used it for 2 days straight...
...and it cycled on and off every 45 seconds for about 10 seconds each time...day and night with NO problem. (That's just under 4000 on/off cycles for the 2 day period.) Just wish it were slightly less in diameter, as it had to be lowered into a very narrow well house, and was a bit tricky to get in there. Would also be nice to have an option for the hose outlet on top as opposed to the side. Overall seems like a beast of a pump. Well worth the $$$.
K**S
Small but mighty
I bought this pump to change my swimming pool water (16000 gallons). After the pool filter pump had drained it as far as it could, I lowered this little gem into the remaining depths. It was so quiet and efficient. I used a net bag around it to keep out big debris and the system worked like a charm. Wish I had this several years ago when I would fight with water accumulating in the pool winter cover.
R**L
Saved our basement!
Great product! Well made and pumps only when water is present. We had a water main break outside the house and it drained the water quickly and efficiently. I also use to drain our hot tub and above ground pool. Great purchase!
J**L
Perfect solution for my flooded backyard.
Leaving in the Vancouver Fraser Valley…every year my backyard gets flooded once or twice a year during big rain storms . I keep borrowing my neighbour’s pump but it did not have a auto shut off. So I bought this unit and it works perfect . I attached a 75ft hose to it and forget it. Highly recommend this pump for small backyard floods.
R**S
Somewhat dissapointed
The Amazon details noted to "1/16"" but does not even turn on in 1/2" of water. Works great in any deeper situatiin but I specifically chose it for the 1/16th boast, too bad. Will keep for possible future deeper water issue.
Trustpilot
2 days ago
1 month ago