Evapo-Rust ER012 Super Safe Rust Remover – 128 oz, Non Toxic Rust Remover for Auto Parts, Hardware, Antiques | Rust Removers and Chemicals

Great help

Just soaked small rusty bits in it, doesnt work at all!!! No change in the rusty surfaces at all, and no reaction with rust. Evaporust is a SCAM!

国内品色々試してましたが、綺麗に錆びが落ち切らず何度も漬け置きしたり、酸・アルカリの刺激臭・異臭がしたり、 直接触れない物だったりと扱いが面倒なの上に、錆びが落とし切れず結局後で散々研磨したりしていました。 Evapo-RustははYoutubeのHand Tool Rescueという古い工具をレストアするチャンネルで使用されており、綺麗に錆 が落ちていたので試しに購入してみました。赤鯖だらけになったネジやに黒錆になっているドライバやニッパとかの工 具を試して見ましたが数時間～二晩漬け置きしておけば殆ど錆が落ちます。動画で見た通りの使用感でした。 酷い錆は錆びてた箇所に若干シミが残りますがワイヤーブラシで磨けば落ちる程度だったので試してはいませんが漬け て置く時間をもっと延ばせば落ちるような気がします。 液は酸やアルカリを含まないので素手で触れても大丈夫です。匂いはちょっと癖のある薬品臭がしますが私はそれ程嫌 な臭いには感じませんでした。同社のジェルタイプも同時購入して使用しましたがこっちの方は液体の匂いを濃縮した ようなキツイ匂いです。ジェルタイプはアルミの錆にも使えるのと大きくて漬け置き出来ない物や垂直面に塗っても垂れにくく、効果は液体タイプと遜色ありませんでした。 液体・ジェルタイプどちらも水洗いしただけでは金属光沢までは蘇らず表面にうっすらとくすんだ膜みたいな物が形成 されているので、水洗いして乾燥させた後にワイヤーブラシ等で軽く磨いてやる必要はあります。 漬け置き後に水洗いしなければくすんだ膜が防錆剤としての効果を維持してくれる様です。 ルーターに真鍮製のブリストルブラシやカップブラシを付けて軽く磨く程度で楽に金属光沢が出てきます。 値段は高めですが一回使用の使い切りでは無く、錆落としの効果が無くなるまで繰り返し使用が可能なのでトータルで 見ればコスパは良いと思います。 大き目のジャムの空き瓶に小分けして繰り返し使用してます。使用する度に液はだんだん錆び色に濃く染まりますが、 数回程度使用した位では効果が薄れたような感じは全くありませんでした。

I do a lot of work with bikes, and often come across lots or rusty bolts, cassettes, chains, derallieurs etc. This stuff works wonders. It doesn't do 100% of all my goods, but i'd say about 98% comes out great, sometimes depending on the metal, it turns it black. But if its chrome, its brilliant. Its happened on a couple of chains, turned the links black, but on some silver chains it's fine. I recently did some files which again worked great but they turned black, but who cares, they are files, and do the job whatever colour they are. Would I say worth the money?.......All day long. 5 litres of this stuff is likely to last me a lifetime, and its apparently Eco friendly. I'm off to try some drill bits now.

This stuff is brilliant for rusty steel, better than white vinegar. I had bolts and bicycle parts that were basically clean, but pretty well rusted. No caked on grease or dirt, a good layer of rust but not caked up thick. I put them in a plastic container of this stuff. It dissolves the rust into the solution, so no wire brushing needed unless the part is covered in gunk. It takes a while. I did the first screw in an ultrasonic cleaner and they were done in an hour. I put the more complicated parts with deep sockets into a container of this and let it soak for a couple of days, they came out beautiful! Depending on the steel it will either come up clean or have a gray/black conversion coating. Great for screws/tools, the conversion coating helps hold oil to prevent future rusting. It won't eat the base metal. Rusty pliers could sit in this for a month, the rust will dissolve but the pliers won't have any pitting except for what the rust did. I wouldn't use it on my antique rifle, because the color might turn, but it's great for general purpose stuff like tools and hardware.

I was a sceptic. This product seemed too good to be true. I was astonished by how well it works! I tried some lightly rusted stuff, it came out like new. Then I tried some really rusty pliers that were garbage just to see how much rust it can dissolve. Those pliers came out usable! You can still see the pits that the rust had created but they were shiny on the inside, no rust. It even got into the moving parts and freed up the seized part. The stuff is freaking magic!

Great product, I used it to restore a completely rusted in and out trunk latch of my classic car. Worked great, unbelievable results. Recommended it to all my friends..