E-One Gold Solid-Metal Aluminum Universal Gaming Headphone Stand/Hanger/Holder for Headsets Display HO-HDP-ALE1GD-00

While spending a good hour pouring over Amazon reviews in an attempt to find the best "bang for the buck" headset stand, I ended my search with this product from LUXA2. First of all, you will notice that all the reviews (at the time of this posting) are mostly all 4 and 5-star reviews. There's not one bad review to be had. That was an important decision-maker. Secondly, for those kinds of reviews and a price that not's awfully exorbitant, this looked to be a perfect choice. So, when I received this stand and started unpacking it, I noticed a few things. First, it is extremely well packaged. I have included a photo of the heavy foam packaging that surrounds the stand. This is important because you know that there is absolutely zero chance of receiving a damaged product. Next, when lifting the stand up for the first time, you feel the weight of this all-aluminum product. It is completely smooth with no rough edges. After you peel off the bottom tape (be sure to locate and do this), you find that it has a non-slip base which holds itself in place without tipping over. The stand has a nice glossy piano black finish (also available in other colors) As the photo, I have included shows, I am able to rest my Sony WH1000XM2 headphones easily rest upon the padded hanger without the cups touching the bottom of the base. I hate headphone bases that don't allow cups to hang freely. Fortunately, this is a high-hanging product. Owning several headphones and various stands, I know first-hand that you can spend a lot of money for a quality headphone stand. This one is half the price of some of the best, and to be completely honest, it does just a suitable job and looks equally as nice as the more expensive brands. Don't hesitate to buy this. It's a quality product.

After buying another stand which didn't work well with the overstuffed ear cushions on my Beyerdynamic DT990 headphones, I began looking for the sort of hanger-type stand which allows the ear cups to hang free, and which was highly rated. Frankly, the Luxa2 E-One had the most stars, was reasonably priced, and in its reviews were none of the "it looks fine online, but when you get it out of the box, it disappoints" sort of remarks. So, I went for it, and could not be happier. Here are all the things which I love about this stand: First is that it is a hanger and thus allows the headphone ear cups to hang free with no possibility of the ear cushions developing flat spots from pressing against stand material as would be the case with other designs. Second, it is very sturdy and solid aluminum which is beautifully cut and textured, with a brilliantly polished chamfered edge around the base. Third, the bottom of the stand - which is weighty - has a generous and moderately sticky pad over its entire surface, thus no small "dots" or pads which will likely come off. Fourth, it is artful in the simplicity of the design overall, in particular the very austere but tasteful black band on the hanger which provides a no-slip grip for the headband - getting that wrong could have been the difference between getting a first look only, as opposed to a second look. As it is, its looks grab you and won't let you go. Fifth, the packaging of the product was very well thought out and attractive. Sixth, Luxa2 is a part of Thermaltake, a reputable company in its own right. Seventh, it matches the color and "feel" of my headphones and preamp - I will be quite happy to look at it and show it off! Eighth, I happen to have a matching silver handkerchief which I threw over it to keep the dust off my headphones ($10 at Men's Wearhouse). I know, I know: at this point I am just getting subjective. But, the point of buying things like the Luxa2 E-One stand is that one has already indulged in - or soon will be - those things which are aesthetic, fun, and put smiles on the face. This has been a great purchase that wrapped up the whole "headphone audio" deal for me. Highly Recommended!

For the price point and quality this is easily the best headphone stand on the market. Just ooze's quality as soon as you open the box,it it packed in heavy duty foam casing. This looks like aircraft aluminum quality, all the edges are perfectly straight and smooth. The base edges are beveled and add to the look. Weight and balance are excellent for my sennheiser momentum 2.0 wireless cans. They are lightweight so can't speak to heavier cans but, I don't see it being a problem because of how well balanced the stand is.The base has a rubber bottom to keep the stand stationary.Height is perfect they hang without touching the base. Where you hang your cans the black strip is rubber and my one minor issue. If you have cans with soft padding it will leave a mark and doesn't provide optimum support. I took foam cut to half moon shape attached with double sided tape and fixed that minor flaw. It didn't affect the look, I will post a picture later.

As a proud new owner of some Hifiman HE-400's, as well as some Sennheiser Momentum and a few others, I wanted a headphone stand that would match the quality of the headphones it would hold (after all, 400$ worth of headphones on the floor waiting to be stepped on isn't really a good idea). I bought the Just Mobile HS-100 Headstand, knowing that it might be too short, and it was. The Hifiman HE-400 basically rested on the detachable cable mount. I didn't really find that acceptable. It seemed that there was only two options, or stupidly expensive or as cheaply made as its price warrants. I wasn't really happy. Then out of the blue I found these. They look a little "worse" than the Just Mobile, but considering they cost almost half, and that the build quality is still excellent, there was absolutely nothing to complain about. I got it out, and it was already assembled (which is nice). The materials are grade A, same quality if not more than any top noth product out there. And the best thing, they fit full size headphones!! HD 600's, HD 650's, HE-400, Audezes...I can't really imagine anything that wouldn't fit. All without looking too large at all. It's also heavy, which I find positive. The bottom is covered with a black non-stick material, which is also great. The only complaint I can find is that when I took it out of the pakaging, I thought it had rub marks, which resulted to simply be uncleaned aluminium powder from the machining process. I love that it is actually machined, but it seems pretty laughable that it's only defect is that the manufacturer doesn't thuroughly clean them before packaging. And easily solved. So bascially there isn't much more to say. If you need headstand that looks great without costing more than your heaphones do, this is the one to buy (as long as you like the high tech look). If wood is your thing, there might be things out there that suit you best, but for the vast majority this is definitely a step up from the cheap plastic ones which only cost 10$ less. If you have any questions, feel free to ask. I will try to upload some picture soon. Thanks for reading!!

The quality is good. I like the weight of the stand and the finish of the surfaces...except for the front edge of the extension where you set your headphones. The corners are a touch sharp and I scratch my hand on occasion reaching for the headphones without looking. If they rounded the edge to match the base, it would be much improved.

Gorgeous. Well-built. Perfect for me. This last has contingent facts unique to me, but here goes anyway. I hoped to put the product atop a "table". The scare quotes because that table was a wooden stand intended to accommodate one particular thing: ONE SINGLE coffee mug (or tea mug). So that table or stand is tiny. Didn't have its dimensions handy to compare to the headphone stand, but it fit BEAUTIFULLY. That mug stand is behind another table, close to the wall (using all of my tiny space) and that's a perfect place for the headphones. Don't have to unplug them from my headphone amp (and other stuff [EQ, etc, won't trouble you; intricate stuff). Points for you are: headphone stand fits perfectly on a coffee-mug "table [stand]"; product is gorgeous; accommodates planar magnetic headphones easily; is quite stable. A couple of tips: the rubber bottom is covered with a plastic film; remove that film. A really useful tip: USE THE PLASTIC BAG supplied to cover this products lovely box AS A COVER for your headphones. The bag is clear, perfectly sized and your headphone won't get any dust on them. Any negatives? I don't know if the very square edge -- even if it be rubber -- might not tend to crease the floppy portion of a headband. A totally round contour to the edge would help the paranoid.

I have been a computer modder since the 90's and have always had a distaste for Thermaltake as a brand. THey always seem to overcharge and underperform in the computer world in my experience. Had I noticed this was their product, I wouldn't have bought it. I am really glad I didn't because this is truly exceptional quality and design for the money charged. Worth every penny. Its rock stable with Shure SRH-1840 cans on it. You can rest your hand on the perch with the headphones and there is minimal, barely perceptible flexure of the arm and the base does not move. If you like the look then buy it. You cannot be disappointed with this stand in any way imaginable. Great design and execution that has me reconsidering my moratorium on Thermaltake despite nearly 20 years of prejudice against their brand. Interesting side note: The packaging is so robust, despite my shipping contained looking like someone ran it, and the box for the Luxa2 throug ha bandsaw, the unit was in perfect condition upon opening.

I bought this based upon the YouTube website video, the ratings here and the color choices and construction. No assembly needed, just take it out of the very well packaged box and foam insert and place it on your desk and rest the headphones on the top and that's it. I have Beyerdynamics Custom Studio headphones I use for my stereo system so I wanted a really nice sturdy holder. It's nicely constructed of all aluminum with a nice diamond cut around the base for nice aesthetic touch. What was important to me is that the base is heavy enough to support the headphones and it has a tacky rubber padding under the base (peal off the plastic under the base) so it does not slip or move on a smooth surface. This is an excellent product for 1/2-3/4 the price of those "high end audiophile" headphone stands sold in certain catalogs. I am very happy with this product and highly recommend it.