Vansky Motion Activated Bed Light, Flexible LED Strip Motion Sensor Night Light Bedside Lamp Illumination with Automatic Shut Off Timer (Warm Soft Glow)

My wife wanted a light to come on when she goes to the bathroom at night and when she gets dressed for work in the morning while I'm still sleeping. This works perfectly. It was easy to stick to the bottom of the metal bed frame and the sensor is at the head of the bed on her side. It was only long enough for one side but puts out enough light for her to see to the closet on her side of the room plus the bathroom on the other side. At the same time it does not wake me up. You can set how long it takes for the light to turn back off. I set it to the max of six minutes. I wouldn't call it a warm white but it's fine.

Yes this has a soft yellow glow! Most of the reviews complain about the bright white light and That it’s not a soft glow as advertised. That is because people are clearly not putting the yellow tape over the LED strip.This is working perfect. The timing is accurate whether I choose 30 seconds or six minutes Auto goes on when my feet hit the floor, and shuts off at the right set time.Really glad I got this, I think this would be a great gift for anyone.

This motion activated LED strip is a great source for nighttime illumination and I love the sensor with the programmable timer. My only major issue is the lack of adhesive sticky on the back. However, that is the major flaw regarding my LED strip - nevertheless I would buy another.I have another motion sensor LED lighting strip, but this Vansky LED strip comes with more options and features.Below is a list of the included materials:1. LED strip2. Sensor (with little dialing wheel to regulate the timer)a. round piece of 3M tape to stick along the backb. two small screws as an option to attach the sensor for a permanent placement3. 2-prong adapter with 58 ½” electrical cord4. 2 separate plastic clips with adhesive backing to hold and store the excess cable out of the way5. extra roll of 3M mounting tape for the back of the LED strip (useless)I bought motion activated LED strip because I wanted the programmable option to regulate the timing of an automatic shut off in our bathroom. Other night light sensors do not remain lighted for a long enough time, which leaves us in darkness before we are ready to leave. Therefore, I chose this one with a timer that adjusts from 30 seconds up to 10-minutes.Originally, I tried to see if the LED strip would fit under the hanging lip of our bathroom vanity. However, the LED strip is too thick and interferes with our sliding vanity drawers. Therefore, the only other place to hang them was above our installed wall mirrors that reach almost up to the ceiling above the bathroom vanity.The first challenge was trying to stick them in a straight line above the mirror, but as I removed the adhesive backing, I was frustrated to find that the LED strip had NO sticky. Only the paper backing on the light strip has the sticky adhesive, but since that peels off, there no adhesive left on the LED light strip. In addition, the extra roll of included mounting tape is the same way – the adhesive is only on one side, and it should be double-sided adhesive tape, one side to attach to the wall and the other side to stick to the LED light strip. Therefore, the extra roll of 3M mounting tape is useless to me.This necessitated using my own 3M Scotch-mounting tape and cutting five feet in even lengthwise strips to fit under the LED strip, applying it on the wall in a straight line and without having any excess to show above or below the light strip. Then attaching the light strip and this entire task was a challenging and a time consuming job. However, this annoying installation was a one-time inconvenience.I will admit when finished, the LED light strip above our mirror looks attractive, every LED light works and it throws off a softer quality of light. It illuminates the entire bathroom without a blinding glare, and the 40” cable attached to the sensor, hangs down at the perfect height. In addition, the clips for the cables offer a tidy appearance.One other notable issue is the automatic shut-off sensor timer. I have this LED strip in a bathroom located in the middle of the house and therefore there are no outside windows to provide any light during the day or night. This has provided ample time on a 24-hour basis to note how well it works and any associated quirks.The sensor location is at the entrance and the LED strip instantaneously lights as I enter. The automatic shut off timer is set for the maximum amount of time – 10 minutes (?) However, sometimes when I am at the other end and further away from the sensor, the LED strip automatically shuts off after approximately 6 ½ minutes. Then it spontaneously flashes back on a few seconds later and stays lit until it reaches the original designated 10-minute power off time.Alternatively, the sensor has another quirky characteristic. Constant movement keeps the LED lights on longer than the 10-minute power off setting. I love that the LED strip remains lit and then automatically powers off a couple of minutes after I leave the room. Therefore, the sensor and timer on my LED lights seem sensitive to both movements, along with the programmable timer.If the LED strip had a sufficient amount of adhesive, this would be a 5 star product. Nevertheless, I would still buy another one of these LED strips for a different area of our home. I love the programmable timer feature and after the initial annoying installation, the LED lighting strip works perfectly well with a sufficient amount of light and without the blinding glare that comes from our overhead ceiling fixtures.

Ordered 3 units on 3 different occasions. Happy enough with the first unit to order a two more for guest bedrooms. First unit ordered works great and continues to do so 2+ years out.Either the 2nd or 3rd unit (ordered around the same time) failed after a few months of infrequent use. Swapping around parts allowed me to ID the faulty part which was the motion detector. Contacted Vanskytek support and explained the issue. Though it was probably out of the official warranty period they responded quickly and shipped me out a new unit right away at no charge. Less than a week passed between my original email to them and receipt of the replacement unit.The replacement unit works great and is actually a better model. Don't know if all models now shipping will match my upgraded unit or if this is just a better version that might sell for more: new unit has different plug sizes on the motion detector so that you couldn't accidentally plug the power into the socket for the lights and vice versa. It also has a dimmer knob so that the brightness level of the LEDs can be reduced. On the original unit the lights are quite bright.. in a pitch black bedroom after your eyes have adjusted to the darkness during sleep.These are inexpensive and do the job quite well. Especially if you have pets who like to hang around your bedside at night and get stepped on once in awhile when you get up in the dark. Also nice to avoid tripping on things or bumping into things at night even if you don't have pets.Highly recommended product and outstanding support. Would buy again!