NewYall Ignition Switch Lock Cylinder Assembly Replace 35100-SDA-A71 for Honda Accord 2004-2007 Odyssey 2005-2007 Element 2007

I’ll begin by saying it works and a quality product. I purchased it to replace the failed ignition in my 2006 Honda Odyssey. Here’s what you need to understand, you’ll need to have the new keys programmed by a locksmith or, do as I’ve done. Simple hold the old key against the new key to start it up.This way you can still use the old key to unlock and enter the drivers side door.At least until you’re able to have it reprogrammed. This is directed to the DIY folks out there. In other words, you can do this and be on the go right away, no locksmith.

The media could not be loaded. You have to cut old transponder out of factory key by cutting along sides, and top, put a small flathead in the top and peel it back on both sides. The ol’ transponder is in the middle of factory key.Then take transponder (1/4”L x 1/8”W) and put it in the slot on new key and superglue it to the edges.I’m still waiting for mines to dry, I just put the ol’ factory key beside the new key to start it for the video.And you have to take the immobilizer off the old ignition system and put it on the new one.That the black ring around the ring of your ignition it’s got 3-5 screws I forget but you’re only going to need 2-3.It cost me 0$ for programmingVery easy installation except when you have to take off the 2 old safety screws with a hammer and flat head and just tap them counter clockwise along the sides, that took about a hour.Very good value and it works.‘07 Honda Odyssey,.

2006 Honda Odyssey EXLSwapped out the old ignition assembly switch that would lock and not turn. Swapped this one in and used the chips from the old keys and car started right up.Thanks

Worked well. Did the job, thanks!

I purchase a set of cheap replacement honda keys with key fob off another seller which state that they include the chips and will get those cut and programmed to my vehicle. NOTE! the keys that are included will turn and crank but your vehicle will not start due to them not having a chip in them. You will need to remove the chip from your original keys that came with your car and place it inside the keys that are included with this item, then glue the little cap back on. Before you do that, One way to test this out n see if it will work would be to insert the key in the ignition and hold your old key next to it. If the vehicle starts then you’re good to go just transfer the chip as I stated before. There are videos on YouTube. Overall got my vehicle working again for cheap! Let’s see how long this item last. Will update if anything changes.

Installation was OK. Removing the old security bolts took a while. The keys go in and turn nice enough. The problem is that keys will not code. My mechanic and a locksmith gave up trying after many attempts.I should have read the reviews and seen that others had this exact problem.

Fit well and operated as intended, zero issues there. Pretty good quality. It’s not OEM but it gets the job done. For the price, you just can’t beat it.

Works great, I removed the tumbler and sensor from my original unit and placed it into the new unit. Allowing me to use my original keys and fob, skipping reprogram.