Dorman 621-052 Engine Cooling Fan Assembly Compatible With Select Chevrolet / Pontiac Models

Installed the replacement cooling fans in a good friend's Equinox. Now staying cool, and everything is working as it should.This is a pretty tough job to accomplish, as there is very little room to remove and install the part. Be prepared to struggle a while with it.Half a year later, still working as when the car was new.Note: I also replaced the pigtail ends on the wiring connecting to the fans. Both of the old ones were fried, and it would not have been a proper repair without doing that. Others suggested going with the OE connectors, as the wires were a heavier gauge than the aftermarket replacements. I concur.

Has worked fine since the install. Fit like the original.

Took a couple hours, had to take off bumper 2006 equinox. Works perfect.

I didn't take the whole front end apart to get it in. Still was not easy had to make some adjustments on the fan wouldn't recommend doing it, but I did. After changing the coolant temp sensor and this the check engine light has not come back on.

Install is definitely not easy, but the part is perfect. As good as if not better than stock fan. Motors have small pigtails for connections which are easier to plug in than the oem style. Plugs on vehicle wiring harness looked blackened or burnt around 1 pin. Simply use a small pick to bend the connector tighter, spray with electronic parts cleaner, and slide the plug in and out a few times to clean it off before plugging it in all the way. Before our Torrent's fans were working only intermittently, and then only 1. Now they both work reliably. Thanks!