Keter Store-It-Out Prime 4.3 x 3.7 ft. Outdoor Resin Storage Shed with Easy Lift Hinges, Perfect for Yard Tools, Pool Floats and Garden Accessories, Black

We live in the mountains and have this storage in our front driveway. It has survived snow, rain, and sun. The top lid is very strong and still works perfect. The front doors are thinner and more fragile, and sometimes do not fit in the holes, but once it warms up again they can be put back into place. The doors are large and makes it easy to put our gardening supplies and even our electric snow blower inside. Some dirt does get in so if you want something sealed, maybe look at another option.

The parts arrived in remarkably good condition. Not a scratch or aberration on any of them. Assuming some prior diy on these things, it was very easy and quick to assemble. The main risk is over tighten the screws. I did that one one of them, but that was the only mishap I am aware of. A little bit of sticky tape on hand to hold the back in place while securing helps if assembling alone. It is a very easy task overall as the instructions are clear and simple. It is not particularly study. Adequate, but not special. The floor either needs to be level or made that way. Otherwise you will have door issues. I may eventually put a bit of concrete under the low corner. For now, it has a shim there. If one needs more sturdiness, adding an strong interior shell would be the way to go. I use this to hide garden items that are otherwise an eyesore when not in use. On that score it does well, it looks good, and the eyesores are now hidden inside a much nicer looking item.

Unit is not real sturdy. Doors flimsy. Base came cracked even though box was undamaged. I assembled with broken piece since I couldn’t wait to do a replacement. Asked manufacturer to give me a partial credit for the base. They would not. Instead after a lot of back and forth they sent me a new base. I am not going to disassemble and replace the base unless it falls apart. Manufacturer quality control and customer relations could use improvement.

I was going to buy another plastic shed from the same seller that I got the last one from but I found this shed for $80 less. I figured the build quality would be roughly the same but boy was I wrong. This thing is built like a plastic trash can with hinges and a latch, very lightweight, very flimsy and I doubt it will hold up well. If I had paid about $100 it might be worth it but $180 is just too much for this poor build quality. I bought this for my electric lawn mower so we'll see just how water tight it is. It was easy enough to assemble but engineered poorly so some of how it's designed just doesn't make any sense. With the side vents near the top I suspect any wind is going to blow rain right inside of it and since the bottom is tub like it's not going to drain if rain does blow in. Really the only thing I can see this being useful for is to keep trash cans in otherwise it's just not very useful. Definitely would NOT buy again. *Update* I noticed today that after sitting in my yard for 2 months there's a big crack in the bottom pan so now the floor isn't even water tight. I regret wasting my money on this garbage.

Not that difficult to put together, BUT I was not able to have it put together for several months, I did not check it for damage, I opened the box a few weeks ago and the corners of the lid were total destroyed as if someone threw it, needless to say I was not happy, I took a chance and called Keter and got a very helpful CSR named Gina, she told me to take a picture and send it along with the receipt and they would check into it. KETER sent me a new lid free of charge. Thank you Gina and Keter. will continue to buy your products.

For the price and the brand name I had higher expectations than what I received. Some background on my, i've been a consumer product designer with a focus on injection molded parts for almost 25 years. So products like this are right in my wheelhouse, therefor my feedback isn't just the average homeowner. The package arrived 2 days early, hooray Amazon! The box faired ok, but a couple of the corners were crushed and another spot had a tear/gouge into the carton, but the plastic directly behind that area was ok. I had the package laying flat on the ground and as I went to pull the assembly out of the box i grabbed what ended up being the base and as i pulled the plastic ribbing on the underside cracked as i pulled. So I stopped and shook everything the rest of the way out. This immediately set off the red flags on durability....both due to a combo of their material selection and wall thickness and ribbing design. I did find another piece of broken plastic floating around in the box which appeared to come from the cover as it was light grey in color. Another disappointment. Fortunately it wasn't functional or an aesthetic area. The unit went together super easy. You can see by my photos i had a unique use for the setup. Only issue with assembly was that i didn't care for how they did the back panel. In my installation scenario, all the sides are exposed. So the way they designed the back, half of it looks like it should and the other half looks like it's inside out because it's the same 2 pieces, they just have it flipped for 1 half. Great way to save money on tooling and molding, but it looks like poo for free standing installs like mine. Other note for assembly is using a electric driver will make quick work of installing the screws....just go easy and don't overdue it or you'll strip the plastic in a heartbeat....so go slow! I built a picture frame pressure treated base with cross members for my install because it's installed in the woods next to my cabin, so i wanted an even flat surface. However, the base still feels "soft" even with the cross members below it. So beware. And i say that because in one of the steps they show a person kneeling inside to install the screws....not sure i would suggest that as cracking the base would be likely. Overall it will keep the rain off the electrical components inside, but i'm not sure how this will fair during and after some UV and a Wisconsin winter of snow...TBD. I think they could have chosen a more robust plastic and maybe improved some design elements to further increase durability. I have a 10+ year old Rubber Maid branded 8'x10' shed at home and it's far more robust than this and the plastic definitely has way more give than this PP (polypropylene) that they used.

Have had one of these before and are very good quality. Paid to,have it assembled.

Fácil de armar, buena calidad de materiales y llegó sin problemas. Yo me decidí por esta opción ya que otras que vi mencionaban que no llegaban con bisagras y pistón, y esta sí los incluye.

Fantastic bit of kit, well built with quality materials easy to assemble and keeps our cycles in good order, grey seller quick secure delivery.

Purchased to replace an old wooden storage shed. Very easy to put together, for 2 OAP's and does the a great iob of keeping things tidy and dry. Does not come with an internal shelf but was easy to add a surplus wooden one that we had. Highly recommend