Standard Motor Products HS-292 Blower Switch Assorted, One Size

Mine was melted along with the wire harness connector.I noticed when I turned on the air conditioning that the electric system was loading up heavily as I was seeing a 2 volt drop on the gauge. Did some research and found this in the dash....... definitely the fix for an old Cherokee XJ

The XJ Cherokees up to 96 have bad wiring from the factory (examples include the headlight wiring that dims over time, the small battery wires that corrode and reduce performance over time, and the engine ground straps). Another area that used terrible wire choice was the HVAC system. The blower motor ages over time and the aged bearing causes an increased draw of power. This eventually leads to the Blower Switch overheating and essentially melting itself and rendering the whole system useless.This switch is a band-aid fix to the real problem (the blower motor) but has brought my HVAC system back online for the time being. It is nice having AC and a fan in my Cherokee again!To perform a real repair of the issue, one would have to replace the blower motor, the blower motor resistor, this switch and likely some of the wiring would have to be upgraded to the next larger wire size. For now, this will have to do!

Fixed my burned switch on my 1996 xj cherokee. Ultimate problem ended up being a poor vacuum seal on my heater valve switch but this piece was still a good replacement.

Exact fit part, working perfectly now for 60 days.

Fits like a glove. fixes very common issue on jeep xj's. Now my heat and ac are working again. Very simple to replace. I would definitely recommend.

Attached my switch and it was jammed wouldn't move and part is that my fan is still stuck in the low settings so it hardly does anything it could of atleast got stuck I medium or high but no

Exactly as advertised

Fit my 94 jeep Cherokee sport with no problems. Works like it should.