CableCreation Cat6 RJ45 Connectors,100-PACK Ethernet Cable Cat6 RJ45 Ends

Fantastic RJ45 Ends. I really enjoy these ones, and they are designed well. I've done a LOT of ethernet cable crimping. I use all kinds of wire, but my typical go-to is really just full copper Southwire Riser Cat6 cables (in-wall certified, essentially for production homes). So anyway, I've done it multiple ways in the past, where I separate my wires and slide them through a sled, clip the end of the sled, then pop the sled into an RJ45 end and it clicks in. I used to rely on that, but I guess once you get used to cutting the wires that just feels like an extra step now. But, I will say, some RJ45 ends just feel "tighter" and harder to line-up the cables right, like they are so tight that unless you are absolutely flawless, you are going to get one of the wires to bend and snag and even though it looks like they all went in, one of them didn't and you end up with a failed connection. Well, not these. These went in so smooth. These are, so far, the easiest single end connectors I've used sliding the wires into right before crimping it. I am a believer now in this brand. Honestly, I just enjoy making ethernet cables. I watch netflix and while my wife crochets, I'm crimping 10ft ethernet cables. I think I found my new go-to brand. I used to buy the Klein or Ideal brands from like Home Depot, as they are good as well, but I would spend 40 bucks on a 100 pack. I bought this because of the good price and I just wanted to see for myself, and holy crap, I feel like an idiot paying this price for so long when a great product like this exists at such a better price. Ideal was and still is a fantastic brand, but we are talking 1/3 the price here. Do yourself a favor, buy a small 50 pack or so at first, see if you like em. If you do, get the 100 pack. Once I burn through this 50 in no time I am definitely dropping for a 100 pack. I have not personally had the issue with them not "clicking" properly, as I have seen other reviewers state. We'll see... I have also used about 30 ends so far and have had only 1 failure on my tester., which honestly was probably my fault.

I saw some of the 1-star reviews about not snapping into place, etc, after I had already ordered these - so I terminated some cable and tried them out immediately upon arrival. Mine seem fine, I checked them against some premade terminations and they really don't seem to be different in any significant way. Interestingly, when I plug anything into one of several laptop ethernet ports, nothing snaps into place for any cable (these ends or any others that I have). I would say that port is worn or never worked all that well for retention, perhaps due to a lightweight laptop implementation or whatever wear-and-tear. Plugging them into a port that I know is perfectly fine (low use, relatively new equipment) results in a satisfying plastic "plunk" sound, and I am unable to pull it out without depressing the plastic latch. I have included video of my feeble one-handed insertion and removal of this cable end into said port. I tested with several other ports (consoles, desktops, test equipment), and while results varied in tactile feel and sound, it did snap securely into place and was unable to be removed without pressing the latch for every port I tried (excluding that single laptop port, which is surely just worn out, abused, or not even designed to latch). I finished the cable and put it to work in my home network with no issues at all. I believe I will keep these, they are inexpensive enough and will only be used for short, static runs. If you are unsure or require accurate-spec components it may be best to go with a brand more established in your industry. But for home-gamers, these seem okay.

Glad these are on the market. I hate the pass through ones, and these work great for thicker cat6a. I will say getting used to the staggered wiring was a bit tough, but it's needed to fit larger gauge ethernet. The teeth work for both stranded and solid core wire, so it works for repairing or making patch cables as well as structure cables. Not a huge fan of the packaging, they come in a flat tray, and i would prefer a jar or just a zip-lock bag.

I bought these for making my own CAT6 wire. I'd never made my own cables before, so this was going to be a learning experience. The tutorials I'd seen all had a guide bar (second piece you feed the cables through first) and when I discovered these did not, I was a little apprehensive. Fortunately they were incredibly easy to install without one. I had the process down in about 30 minutes. My only complaint is that the catch bar on top which prevents the finished cable from slipping out of your router/switch/device seems really crappy. It's flimsy plastic which has a lot of bend to it, and I had a LOT of trouble getting them to properly click in place. If your plan is to use this for cables you won't be plugging in and out much these are fine. If you're going to fiddling with these more than once a month they're going to break relatively quickly and they'll drive you nuts. I'm using these for in-wall CAT6 and they're fine for that purpose. I'll be using pre-made patch cables for stuff I need to move frequently in my switch.

these connectors (CL0190) definitely work for my cat6a cable (my fatter cat6a cable can't use old type connector where the individual wires are planar/straight across, and also usually don't have a big enough orifice for the whole cable sheathing, but these are staggard/zig-zag for the individual wires and my pretty thick for 6a def slips in where it crimps the whole cable down); AND, they're much easier than the newer three piece cat6a connectors (like almost 100% success rate, where as the newer three piece we get 80% success rate), and I haven't noticed any bandwidth issues (or at least, I'm getting full 125MB/s out of my gigabit nics/router, and I'm unsure the connector would matter for those who want 10gig to go from 55 meters to 100 meters--that's more about the cable itself) side note: these are not passthrough, but that's good for us: we have an old ideal 30-496 crimper, which doesn't cut off the passthroughs, so these are actually perfect for our needs

CableCreation's Cat6 RJ45 Ends are a must-have for any networking professional. These 100-pack Cat6 connectors are perfect for connecting solid wires and standard cables to create a reliable network connection. The connectors are made of high-quality materials, making them durable and long-lasting. The transparent design allows for easy identification of the wires, making installation quick and easy. The connectors are also compatible with both Cat6 and Cat5e cables, making them a versatile choice for any network setup. The connectors are easy to install, with no special tools required. They come with a simple crimping tool that makes it easy to secure the wires in place. The connectors also feature gold-plated contacts that provide superior signal transmission and reduce interference. This ensures that your network connection is reliable and secure. Overall, CableCreation's Cat6 RJ45 Ends are an excellent choice for any networking professional. They are made of high-quality materials, feature gold-plated contacts, and are compatible with both Cat6 and Cat5e cables. They are also easy to install, making them a great choice for anyone looking to set up a reliable network connection quickly and easily.

Great connectors! It took me a few failures to eliminate the user error. I learned to leave the wire ends long enough to reach all the way in, cut them perfectly the same length, and align them to stay in the right order. Then with a little finesse, they would slide right into the correct holes and crimping made great connections.

Functional, but harder to use than most. I had issues pushing the wires into the connector because of the poor wire guide design. If any two wires are too close together, the connector won’t slide on. Will not buy this brand again.

High quality RJ45 ends that is easy to crimp, provide sufficient space to insert the tiny wires, It's also strong plastic and the locking mechanism/clip doesn't break, I recommend this if you want this style of RJ45 Connector

They keep sending me Cat5e flat cable plugs instead of Cat6 standard cable plugs. Seller: CableCreation

Very good i like this my all stuff in there safe & Organize. Looks like Very beautiful.

Good but not through connectors

Muy funcional, adecuado y seguro.