JENOLITEDirectorust Spray Paint Satin Finish | ESPRESSO BROWN | 400ml | Direct To Rust Spray Paint For Metal | All-In-One Multi Surface Paint for Metal, Wood, Plastic, Ceramic | RAL 8017

Colour same as shown, seemed to go a long way, used on metal bird, plastic large tub and metal rusty garden spinner.. so far so good. Sprayed each item twice.

This product was used to apply satin black paint to normally-visible functional car parts where the original finish had become degraded.The can contents mixed perfectly with the usual "rattle can" shaking and the nozzle worked perfectly to produce a uniform conical spray measuring about 50mm diameter at about 160mm distance. There was minimal, if any, side-splatter. Complete colour (black) coverage was achieved by the first light coat.The can was well pressurised, leading to a high paint delivery rate, so care was needed to avoid unwanted paint build-up and possible runs. The instructions recommend applying up to four light coats for best results, with 15 minutes drying time between coats. I think two coats would have been sufficient for my purpose, but I put on four and ended up with a brilliant result.Because of the powerful paint delivery and the opacity of the colour, I would recommend spraying outdoors where there is nothing of importance downwind, or, if working indoors, pay careful attention to masking and screening (more than you might think necessary).Best rattle-can I have ever used.

Good value for money, good finish and gives good water resistance. The quality when applied is good and seems to have good durability. Giving very little ode.

Used this to spray a wooden shelf which had been pre-treated with something hydrophobic. Was easy to use and covered it nicely. Colour was really nice, if a tiny bit lighter than I expected.

Made a long job, quick with even coverage on furniture

I begrudgingly paid £30 for 3 cans but it was worth it in the end! The colour was spot spot on, and my chairs look almost new. There isn't much in the cans though, used almost all 3 cans for 6 chairs and a table.

This was such an easy and fun product to use! I sanded the bench first, applied the JENOLITE rust neutraliser (be careful as this product stains floor tiles). Make sure you order enough paint. Three coats were used on this bench and required 3 bottles. It took about 4-6h to dry.

Very good paint, spray is easy to press not like some where you struggle to depress nozzle. Used it on my Honda motorcycle engine side cover, only took two coats for a good finish.