Thank you for choosing the LYR.Pedal! Tips: To use this product, you need a certain basic guitar pedal usage. If you don't have any foundation, please buy it carefully. The product does not support disputes.Thanks It has Di function, box simulation function, microphone placement, box material adjustment, front-end function, three-stage equalization, sound source input function, headphone output function, dry wet signal output function, dry wet signal loop function and so on With this equipment, my friends are competent for recording on sound card, performing on stage, or improving the timbre and dynamics of our bass!!!! Introduce the function and characteristics of this device： First of all, iuput is divided into active pickup and passive pickup. There is a shift under it to switch. Then, the out output part is 6.35 and di out wet signal output and di parallel dry signal output respectively. These two kinds of signals are very important when recording, The 6.35 output is the mix ratio output (here the mix ratio is the dry wet signal). There is a shift below 6.35 to realize the switch through or enter our output. In other words, it is a bypass Then the panel part of the preamp / Blue knob is to control the dry signal and enter the previous stage of a mixed signal ratio, control to the minimum is dry signal, to the maximum is wet signal Volume, gain, medium frequency, low frequency, high frequency, where the three-stage equalization increases 15dB and attenuates 15dB respectively. There is a frequency band selection in if, which are 400Hz, 900hz and 1.5khz. However, if knob cannot be set to ODB The "cabsim blend" knob is the mixture ratio control of the box part and the part without box simulation. When the knob is set to the minimum, the signal does not go through the box simulation; When it reaches the maximum, it will be simulated by the box. The box parts are 4x10, 1x15 and 8x10. "Cab size" this knob box material, is equal to the timbre from transparent to warm T
Trustpilot
1 day ago
3 weeks ago
