Beck/Arnley 045-0358 PCV Valve

Thumbs up easy install

This seems to be a perfectly fine product that is a valid replacement for the Honda oem pcv valve. There is lots of confusion and misinformation here, so I hope my review is helpful.The pcv valve is supposed to be a one-way valve that allows positive crankcase vapors and pressure to be routed into the air intake and be subsequently burned in the combustion chamber. There are two openings on the valve: the holes in the middle of the valve, and the openings in the small, tip end. There is a spring loaded piston in the valve such that air should only pass from the middle holes through to the tip end.If you can pass air both directions then the valve is no longer good (which is how my oem valve was). If you cannot pass air from the middle holes through the tip end then the valve is blocked and likewise no longer good. I was surprised how hard I had to blow (about as much or a little more than starting to inflate a party balloon) to get air to flow through the valve, but I didn't engineer this part, so I'm not the judge of whether the difficulty is proper or not. It is a new part, so I'm going to assume it is as it should be.As I note in my pics, the middle holes are for the portion of the housing on the engine valve cover. Crankcase gas in the valve cover enters the middle holes of the valve, goes past the spring loaded piston in the valve, and then exits the tip end to go through the hose into the intake manifold.THERE ARE NO LOOSE PARTS IN HERE. People saying the thing is possibly defective because they couldn't sense any parts rattling are conjecturing. Maybe that's the case for other pcv valve designs, it is not the case for this one.The o-rings on this valve and the fitment in its hole are perfectly fine. This valve snapped into place as I installed it, indicating the o-rings did have to compress to get the valve inserted into its hole. This did NOT fit any looser than the oem one I removed.On my 05 Odyssey access to this valve is straight-forward with enough room. Maybe on the MDX the angle and available space are a pain, not so on my car.

It was ready and simple to install. It's only one solid part, just basically plug n play. Now my Honda engine for my 2007 Saturn Vue 3.5L V6 can breathe better.

Promised to be new, but came with the ball stuck. We tried to put it in by ourselves so we didn’t even know since the old one was already stuck when we took it out (the tiny ball valve suppose to make a clicking sound when you shake it). We found out after going to the dealership and purchasing one from there.

Used as a replacement on my 2019 ridgeline. It installed easily and works as it should.

Great product

I installed this early 2022 and it's March1 in which I have a defective PCV valve. Not only can I not return it, past the deadline though a warranty should have been somewhere but too much of hassle to work it out, anyways the valve was faulty in that it was leaking oil. I took the valve out, cleaned it multiple times by multiple tricks I read and when I shake it there isn't even a hint of a rattle. Every PCV valve should have some rattle, that's how you check it if you suspect issues; regardless I bought one from Acura today that rattled like a snake so hopefully my oil leak is resolved or this POS valve may have caused too much pressure and is the source of the valve cover gasket leak or rear main seal. Just pay the extra money for a good product or at least one with a year (mine has lifetime with Acura) warranty.

Great buy! Works great in my 2007 Honda Ridgeline!

Marchandises impeccable

This item was manufactured in Japan, that's a plus. Very easy to install, seems to work fine, won't know for sureuntil a little further down the line.

El producto es de buena calidad. Hay que tener cuidado al quitar la válvula anterior el plástico puede estar cristalizado y romperse en el interior del motor

Good parts

It’s fits perfectly!