HEAVY DUTY HIGH FLOW COMPRESSED AIR IN-LINE PARTICULATE FILTER WITH METAL BOWL, 3/4" NPT PORTS, 140 CFM, VISIBLE SIGHT GLASS, 5 MICRON ELEMENT

i recently purchased a 60 gal stationary air compressor for my shop and setup a compressor (between compressor outlet and tank inlet) using this product and it worked like a charm. very easy to connect and very well made. using appropriate connection methods of ptfe paste, correct brass fittings (3/4” in my case) there has been absolutely no leakage and almost no water making it through to input of tank

Great product it replaced a bunch of other filters for airline system at an affordable price. Good for extracting water out of automotive painting needs.

I finally broke down and purchased a full set of the dryer and particulate filters. I have a major moisture problem with my compressor thats nearly 30 years old now, but is still kicking. These were an instant resolve to my problem. I had a sealing issue with one of the dissicant dryer units, but sorted that out with using yellow gas line Teflon tape that is much thicker than regular plumbers tape. Otherwise these seem to work very well, and hold the pressure at 150 psi without issue. My upcoming projects will test them out from a steady use perspective, but the moisture in the air from the compressor is now totally clean and dry, and my air tools are Grateful! I would recommend these for the weekend warrior DIY use. The pro grade level hardware is for what it is, but these are great for the price.

Compared to others on the market the price is respectful.

Bought this as a first stage filter element coming out of our compressor. I was skeptical of what I was going to get given the fact that there is no brand tied to it, but I was pleasantly surprised. Super heavy solid aluminum (?). Its a half-turn seal so you can place the sight glass on either side, which is a feature that not many of these have. I have a name brand .01 micron filter mounted elsewhere and because of the nature of the piping and filter location, you can't see the sight glass at all. This filter eliminates that issue.Dual o-ring type seal. Solidly built unit.Mounting bracket is robust and screws into the upper housing using machine screws.I am considering taking off the manual drain valve and piping it to a timed solenoid drain valve so that it automatically drains despite being pressurized 24/7. I wish I bought the auto drain!

I dropped it a broke the drain button before I installed it but to my surprise it still works it’s just a little sharp so I have to use some to push the drain button but that’s my fault not the product.

work very well

It was a little leaky at first. Took the bowl off and re tightened it and its been fine since