DI10 IR Illuminator | Medium Range Infrared Flood Light for Security Camera (w/Power Adapter)

I have 2 installed so far. One failed after a while (I forget how long) but I was sent a no-questions-asked replacement! So, 10/10 for great customer support and service. The 2nd unit later stopped working as well. I played around with a few power supply setups and found that it would not light up when plugged in via a DC extension cable. I now see that as of November 2023, they have upgraded the power supply from 12VDC to 24VDC, as that appears to have been a common problem. Sadly, my units are all pre-November. In this instance, I used an AC extension cord to bring the PSU to within reach of the standard, attached power cord, and that unit is now working again. Unfortunately, the replacement unit that was sent to replace the first failed unit is now emitting a buzzing sound (and is running quite hot, I notice) - I don't know if this is an early indicator of failure. Perhaps I can reach out to the customer service team and see if they will send me 24V PSUs, as that seems to be a key improvement. I note that they say "850nm lamp is semi-covert and NOT 100% invisible, it gives red glow which is invisible when more than 5 feet away from the light." - I can certainly see the LEDs from way more than 5ft away (clear across my driveway - at least 30-40' from inside my house) but the driveway itself is not "glowing" - so perhaps they mean no *radiated* light is visible, but the individual LEDs are certainly visible from far away, so not as covert as claimed, if this is critical to your application. For my use, I don't mind that people can see that they're being observed when on my property :) Heck, by the time they're in my driveway, having opened a gate to get there, they'd better have a good reason to be there! Finally, as for performance; 2 units light up my backyard and driveway very effectively, to provide good IR illumination for my Unifi camera. I had to disable the Unifi's built-in IR, because it caused a lot of false motion alerts due to bugs (that are clearly attracted to IR) showing up as very bright objects flitting in front of the lens. By placing the Tendelux unit just a few centimetres (yes, I speak both measurements :)) away from the camera, I no longer have that issue at all. The bugs may still be there, but they don't show up on the camera. It's fun to watch skunk, racoon, possum & neighbourhood cats wandering around my garden at night :) It's also reassuring that my property is well illuminated for the camera, without poisoning the night sky with more visible spectrum light (not to mention the power saving of having to run a bunch of outdoor lights all night.) I will probably buy more of these (maybe try a long-range model as well) as I add cameras. Right now, I just don't have a good way to get power to the other camera (it is self-powered over ethernet) location, so I have to rely on it having not so great illumination. Update 2024-03-04: upping to 5 stars because of stellar service. One of my power bricks was buzzing/whining; support jumped on it quickly, and sent a whole new light with the newly updated 24V power brick. Buzzing solved! Thanks for really standing by your product!

UPDATED AGAIN -- I got a full replacement item from Tendeluxe and all I needed was the newer 24VDC power supply. I went in the attic and replaced the power supply and the light is fully back in service. Now I have a spare light in case that is ever needed, greateful for the extra mile in service/support -- Thank You Tendelux! UPDATED -- It has been installed for just under 15 months. It has worked VERY WELL and its IR light power is great. But I now observe it at night by watching the IR lighted area from a camera that the IR light has failed and sporadically flashes just enough that it looks like it is trying to work but will not. The flashes I see remind me of a flash from a photo camera but the flashes come irregularly, sometimes brightly and sometimes very dimly but always in very short in duration. Sometimes it flashes approx each 5 seconds or 15 seconds. I have requested warranty support. Whether it is a power supply or the light itself, something needs replacement. After a very responsive email with customer support, they thought it was the older power supply and he would immediately send me a replacement. I thought he was just sending a newer 24Vdc power supply and I end up getting a complete new replacement! As I had said - it shines great - lights up a very large part of my backyard and deck like daylight (when seen from a nighttime IR camera of course). My neighbor also got one I can see his yard from my cameras also. These things really extend the light range of typical cameras a lot. I bumped up my rating since I like the product and the support is without question.

Works as stated, wish I had ordered a long range though. The field of light and intensity seems smaller and weaker than what I was hoping it would be.

I bought one of these under 2 years ago, and it failed after a few months of use. The power supply got extremely hot before failing. I confirmed it was the power supply by using a third-party one, which worked but flashed due to insufficient power. I contacted the company via the QR code on the device and received a response within 12 hours - already impressive! They were extremely kind, apologetic, and did everything to make up for the inconvenience. They only requested a photo of the power supply and my mailing address. After providing this, they immediately sent a replacement which arrived within two days; not just a power supply I might add, but the whole device - even more impressive! The new power supply is much better and no longer overheats. I’m highly impressed with this company’s customer care and highly recommend their products. The IR lights are very bright, significantly improving my camera feed quality, with great range and a reasonable price for how well built the product is. I will be purchasing more in the future and genuinely hope you do too!

Great build quality, works as expected (bright and good range), but unfortunately didn’t survive a single heavy rain (water leaked inside) - probably better to be installed under a cover.

These are a HUGE improvement over the previous gen from an aiming perspective. I wish they sold these in different illumination patterns. These have a good general purpose width, but I have many cams with different zoom levels and would like to match the illumination better. Wide angle cams may experience a center hot spot. More zoomed cams may not make full use of the power these put out. But the illumination is consistent. The power draw is right on the spec provided. I think there is still some room for improvement on the angle adjustment. It's so, so much better than previous gen or other offerings, but not perfect. Although aiming isn't all that critical as the patter is so wide. I have may of these, all powered by PoE splitters. A version without a power supply would be nice. Even if $1 cheaper because I just toss the power supply in the trash.

I recently purchased and tested the Tendelux DI10 IR Illuminator, and unfortunately, my experience did not match the advertised claims. I had high hopes for this product, but it fell short in both durability and performance, leaving me less than satisfied with my purchase. First and foremost, the main issue I encountered with the Tendelux DI10 IR Illuminator was its durability. The product was marketed as being suitable for outdoor use, boasting a robust design that should withstand the elements. However, after a mere 8 months of outdoor use, it ceased to function entirely. This short lifespan was certainly not what I expected, especially considering its supposed resilience. In addition to its disappointing durability, the product's performance also left something to be desired. While it initially worked reasonably well, I noticed a decline in its efficiency as time went on. The performance degradation seemed to correlate with its exposure to various weather conditions, which should not have been the case given its supposed outdoor capabilities. Another aspect that caught my attention was the product's failure to live up to its advertised features. Certain functionalities mentioned in the product description did not work as seamlessly as claimed. This led to a sense of frustration and disappointment as I had expected better performance based on the promises made by the manufacturer. Despite these shortcomings, I will acknowledge that the Tendelux DI10 IR Illuminator did have some positive aspects. When it was in proper working condition, it delivered satisfactory results and showed potential. However, these positives were overshadowed by its premature failure and lackluster performance over time. In conclusion, I cannot fully endorse the Tendelux DI10 IR Illuminator based on my experience. The advertised durability and outdoor suitability did not hold up, as it stopped working after only 8 months of use outdoors. While it showed promise initially, its performance gradually declined, further adding to my disappointment. I would advise potential buyers to proceed with caution and consider other options with better track records in terms of durability and reliability.

I have a few of these and they work well. My oldest tendelux is about 2 years old. This one lasted 8 months. I have tried unplugging and changed outlets...not working.

This light is a beast. UK customer here. I use Reolink dome cameras and they suffer a bit from internal reflection from the built in IR and Obv spider webs I put this light about 50cm below the camera turned off the built in IR and waaaay we go. Imagine one of those old skool 150w halogen lamps this light is like that but Infra Red with only minimal spillover into the visible spectrum.

It works really good in my garage

Works as expected but the power supply fails in less than a year. Don’t toss the light, just buy another power supply with the same voltage.

Had some blind spots at night this quickly resolved the issue! Bought the DI20 for another location a fay later

This illuminator adds light to my Dahua 2.8mm eyeball / turret security camera. The issue is that the light projects a band or strip of light as opposed to flooding the area as described by distance coverage area. I would go up to a larger format 120° vs this 90° illuminator for something like a driveway or backyard. This would suffice for the front door or similar smaller enclosed area but not the coverage or distance as described here. P.S. unit gets very hot ok for cool ambient temperature but wonder about longevity come hot ambient summer temps.