Kreg KMA2685 Rip-Cut Circular Saw Guide - Cutting Tool - Guide is Best for Regular (Side-Blade) Circular Saw - Ensure Compatibility Before Use - Woodworking Tools for Home Improvement

EDIT Its update time on this one yall. To start I stand by my enitial review of the product. After a few uses the slideing action did smooth out as I thought it would. As I allso mentioned the plastic felt like it was to brakable. And this latest episode ads credence as to why I feel It should be all mettle. The plastic lock snapped while I was sinching it down after an adjustment. I had not at any point in time gottent ruff with the tool. BUT it was sitting out in the blazeing sun for a good while as I was working out doors and had no real shade. So I do wander if the exces heat on the plastic didnt play a part in it. Iv uploaded picures to show whare the failure occured I'm highly satisfied with this tool. It's a snap to put together its light waight and easy to use. If you can mess up your cuts with this you mayby might want to find something ells to do Now despite my happiness with this product I do have some mild constructive criticism. 1 it would be really nice to get and all mettle version of this tool. I just feel like all the plastic parts can be broken. Even at a cost premium I would pay it 2 the adjustment on this thing is herky jerky rough not at all as smooth as I feel it could and should be it can allso effect fine mesurements. But Mayby this will level out with more use 3 this gose back to the all metle parts thing again. But the plastic clamp that holds the main line in place i wish wer metel as it feels like something that could eventuilly get warn out and iether snap or not make good grip. As well as the saw clamps themselves theyr metle rods anchored to plastic and the way that whole portion of the unit flexes upwhen ypu put tension on the mounting screws. Yea I think you can do somthing about that Now befor anyone starts throwing rotten food at there monitore I'm actuilly not bagging on this product far from it. So far nothing is brocken and everything is holding together. This is so far a good product. These are all just feed back for the company to take into consideration on any future tool updates

If you struggle with making straight, accurate cuts with a circular saw, the Kreg KMA2685 Rip-Cut Guide is a must-have tool! Whether you're a DIYer or a professional, this track guide makes ripping plywood, MDF, and other large sheets effortless and precise. Key Features: ✅ Effortless Precision Cuts: Attaches to your circular saw, allowing you to make perfectly straight, repeatable cuts up to 24 inches wide. No need for chalk lines or clamps! ✅ Universal Compatibility: Works with left- and right-blade circular saws, making it incredibly versatile. ✅ Tool-Free Adjustments: The easy-to-use measuring scale ensures quick and accurate setup for fast, repeatable cuts. ✅ Durable Aluminum Guide Rail: Provides a rigid and stable edge to guide your saw smoothly without wobbling. ✅ Ideal for Large Sheet Goods: Helps cut plywood, MDF, and OSB sheets with ease—no need for a table saw! My Experience: Setting up the Kreg Rip-Cut took just minutes, and I was amazed at how much easier it made cutting full sheets of plywood. No more struggling with uneven freehand cuts—every pass was straight, smooth, and precise. The tool-free adjustments and built-in measurement scale made it incredibly user-friendly, even for beginners. It’s also a time-saver—once the guide is set, I can quickly repeat cuts without having to measure and mark each time. I especially love how lightweight it is, making it easy to transport and store. Pros & Cons: ✅ Pros: ✔️ Delivers straight, accurate cuts every time ✔️ Easy to attach and use with most circular saws ✔️ Quick adjustments for repeat cuts ✔️ Lightweight yet durable aluminum construction ✔️ Eliminates the need for a table saw in many projects ❌ Cons: Limited to 24-inch cuts (not ideal for wider rips) Plastic components could be more heavy-duty Final Verdict: The Kreg KMA2685 Rip-Cut Guide is a game-changer for anyone working with sheet goods. If you want faster, straighter, and more repeatable cuts with your circular saw, this is the perfect solution. It’s a must-have for woodworkers, DIYers, and home improvement projects!

For the most part this works really well. It isn't difficult to set up and fit the Bosch table saw perfectly. Below is my summary. Pros: - Easy to set up - Fits the table saws I own (Ryobi and Bosch) - Works well when cutting further away from the edge of the board - Seems like solid design and construction Con's: - The ruler is not accurate. I have to draw the measure line and align the saw to that and then lock it. - Sometimes with cuts closer to the guiding edge, it doesn't work as well and tends to drift. I have tried different ways to hold it and align to the edge and still have this issue (doesn't always happen) Other: - The movement of the slide up and down the guide isn't super easy. It takes a little manipulating to get the saw to move which means it's hard sometimes to get it to always line up consitantly. - There's no really quick connect/disconnect. I guess if you take taking 10 minutes to remove screws to get the saw off then that could be considered a quick connect/disconnect but I find that a hastle. All in all, if you don't have a big table saw and can't rip long pieces straight on your own then this is worth owning. I'm glad I have it but I definitely have to be careful ripping into expensive sheets.

This circular saw guide is beyond what I expected. It works on a whole different level—super accurate, easy to use, and makes every cut clean and straight. It really improved my workflow and saved me time. I would definitely recommend this to everyone, whether you're a beginner or experienced. Great value and a solid tool to have.

The Kreg KMA2685 Rip-Cut guide is a game-changer for straight, accurate cuts with a side-blade circular saw. Setup is fast and simple, and once clamped, the guide stays rock solid — no wobble or drift. Cuts come out perfectly straight every time, which makes a huge difference on sheet goods or long boards. I’ve used it on plywood, MDF, and solid wood, and it performs flawlessly every time. It’s lightweight, easy to store, and incredibly sturdy. Tip: Double-check your saw’s compatibility before purchasing, but if it fits, this guide will dramatically improve your cutting accuracy and confidence. Highly recommended for DIYers and professionals alike — precision and peace of mind in one simple tool.

Key words “Saw guide”! This item works as it should and is well worth the money. It’s amusing that so many bad reviews have been left because the item “feels like it’ll break”. This item is made of ABS plastic which is the same material found in the interior and exterior of cars! Its durable hard plastic. Indestructible? No absolutely not. I purchased this to use as a GUIDE and it did exactly what the marketed name implies. Other reviews state that it wasn’t square out of the package. Mine was slightly off but I unscrewed the guide handle and adjusted it prior to use. Other reviews stated that the “ruler guide” was off by an 8th of an inch so I didn’t even bother using it. I used a T-edge that I already knew to be accurate to mark my cutting point prior to adjusting my saw/saw guide. My only complaint is that i wish this guide attached to the saw at both ends because when you attach it to the nose of the saw the guide pulls away from the saw base plate at the opposite end. This doesn’t impact its effectiveness for once the saw is laid down the weight of the saw closes the gap but some people tend to lift their saw at the end of the cut instead of pushing all the way through the cut which could be problematic resulting in chipping especially if you’re cutting a MDF/HDF with a veneer as I was. FYI i used a 40T blade to prevent the veneer from chipping.

Adequate for general cut requirements. Very easy to assemble and connect to, but definite issues. Allows for left and right motored circs. It is better suited for more contemporary saws (7 1/4, etc.). Very dependent on plastic...not the strongest choice. It is better than a simple straight edge, but not a great deal better. Does NOT replace the accuracy and precision of a table saw. Anyone who sells this as a table saw replacement is doing the buyer a disservice. That is, uinless it is being compared to a weak, basic capable job site saw. There accommodation for tilt capabiility, to make straight line angled cuts, but does not provide for angled mitred cuts--also a capability on even to the most cheapest table saws out there. The critical anchor points for securing the saw to the base (the essential element of the setup--there are only two) are steel, but rooted in the plastic base...design flaw...seriously limits the available pressure that can be placed on the anchors when securing the saw to the base. This means that any resistance encountered during the cut, whether by knots, sap filled wood grain, or even an unintentional uneven pressure on the saw sled, can cause the base to move from its front mount. This means an ever so slight offset results which gives an offline result. So, is it worth the money? Depends on what you are using it for. For serious woodworking, where real precision counts, no, it's not worth it. For more general applications, it is better than nothing, and would probably, probably be welcomed...that's about it.

I’ve been ripping plywood sheets for a long time, this is a very handy tool and met all my needs. First use was on birch plywood and it worked great. If I had a shop I would have used a table saw, and this attachment made it easy to rip12 inch boards.

This is a great product. I’m a carpenter by trade. It’s like having a table saw set it and start ripping fast and easy. We’ll work on any. Saw just a few modifications couple screw turns and you’re off to go if your brakes I’ll definitely buy another one.

I bought a cheaper one off Amazon which failed miserably over the quality of the securing grub screws which were useless, they failed within a couple of times removing the saw from the frame. So I sent it back and purchased the Kreg one. The Kreg is a much superior quality tool in every way. So pay the extra and go for the Kreg you won't regret it. It's really accurate and can soon rip a 4 ft board in half, so if like me, you like to buy 8x4 sheet material but have to have it delivered because you can't get the width of the board in your car, this is ideal for ripping them into 2 ft widths to slide into the car, if you have the right car that is of course, which I thankfully do. I've also removed and replaced my saw numerous times and the grub screws haven't had any issues, like the cheaper version I previously purchased. So I'm well happy!

Los cortes con la sierra circular al menos en mi caso eran toda una pesadilla, ajustar la guía para hacer un corte derecho era tardado y y si deseas repetir el mismo corte ni hablar otra vez a empezar desde cero. Con esta guía todo eso es cosa del pasado, cortes rectos y fáciles todo el tiempo aún en tableros grandes, yo lo adquirí con dudas pero estoy muy contento con los resultados, desde ahora Kreg tools tiene un seguidor más de sus productos, si necesitan una guía para sierra circular esta es la única que van a necesitar materiales de calidad y alta precisión, altamente recomendable. Gracias Kreg por tan buena herramienta, y gracias Amazon por el excelente precio.

ممتازة

Ottimo