3/16 Fuel Line

This 1/4‑inch line arrived clean, flexible, and exactly the right diameter for small‑engine work, and it seats firmly on barbs without needing excessive clamp pressure. The material feels tougher than the usual bargain-bin vinyl, with enough wall strength to resist kinking when routed around tight bends. I cut and installed it on a small Briggs setup and it handled fuel flow without swelling or softening, which tells me the rubber compound is decent quality for long‑term use. For the price, it’s a solid value if you need a straightforward replacement line that behaves the way it should. A dependable pick for routine maintenance.

I bought this YAMAKATO 1/4” fuel line hose kit to replace the old fuel line on my Briggs & Stratton lawn mower, and I’m very impressed! The hose is high quality, flexible yet sturdy, and the included 20 clamps were a huge bonus. Installation Instructions: 1. Safety First: Make sure the engine is completely cool and the fuel tank is either empty or safely drained. 2. Remove Old Line: Use pliers to remove the clamps from the old fuel line, then carefully pull the line off the fittings. Be ready to catch any residual fuel. 3. Cut New Hose: Measure the length of the old hose and cut the new hose to match. A sharp utility knife or hose cutter works best. 4. Attach New Hose: Slide a clamp onto each end of the hose before pushing the hose onto the fittings. The hose fits snugly, ensuring a good seal. 5. Secure Clamps: Position the clamps over the fittings and tighten them down. The spring clamps included are easy to squeeze and secure. 6. Test for Leaks: Add a bit of fuel, start the engine, and check for any leaks. This kit works great on small gas and diesel engines, including Kawasaki, Kohler, Briggs & Stratton, and generators. Highly recommend!

I customized my 8,700 watt inverter to run a 12 gallon auxiliary fuel tank and also full wireless automation! I installed this 1/4 in. fuel line to the tank and the inverter with a with a primer ball in the middle so that I could prime the 12 gal. fuel tank to the inverter. It works perfectly. This appears to be a very good quality fuel line and is a perfect fit for my high quality brass 1/4 inch barbs as well. It is holding very well with no leaks and runs my 420cc inverter engine efficiently at full RPM. I have added an image to show how I use this. Now my inverter can run for over 24 hours and I don't have to run outdoors in the freezing cold at night during a power outage. I highly recommend these well constructed primer balls for fuel. So far, so good.

The YAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose arrived precisely as advertised, a reliable workhorse for small engine applications. The 10-foot length provides ample material for various repairs on Kawasaki, Kohler, or Briggs & Stratton engines, as well as generators. Its 1/4 inch inner diameter is accurate, ensuring a proper fit for specified connections. A definite plus are the 20 included rubber-coated clamps, which add significant value and save the hassle of a separate purchase. The hose itself feels robust and adequately flexible for installation. Functionally, it performs exactly as anticipated, delivering fuel efficiently and without issue. While it’s a perfectly competent and practical product that fulfills its purpose admirably, it doesn't offer any groundbreaking innovation or unexpectedly stellar performance to elevate it beyond a solid, dependable choice. It's a pragmatic purchase that gets the job done well.

I recently purchased the YAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose for my Kawasaki small engine, and I couldn't be happier with its performance. This fuel line hose has exceeded my expectations in every way. Quality: The first thing I noticed was the high-quality rubber material. It's thick, durable, and feels incredibly sturdy. I have no doubt that this hose will withstand the test of time and various weather conditions. Performance: Installation was a breeze, thanks to the 20 included clamps that ensured a secure and leak-free connection. The hose fit perfectly with my engine, and I experienced an immediate improvement in fuel flow and engine performance. It works seamlessly with both gas and diesel engines, making it a versatile choice for anyone with multiple types of engines. Length and Flexibility: The 10 feet length provided more than enough hose for my needs, and I appreciated the flexibility of the material, which made routing it through tight spaces a hassle-free task. Versatility: I've used this hose on a Briggs & Stratton generator and a Kohler engine, and it performed flawlessly with both. It's clear that this hose is designed to work well with a variety of small engines and power equipment. Overall, the YAMAKATO Fuel Line Hose is an excellent investment for anyone in need of a reliable, high-quality fuel line. The combination of durable material, ease of installation, and versatile performance makes it a standout product. Highly recommended!

Great product

Finally found some fuel lines that fit my application. Great value and fitment

Good replacement fuel line for my Honda pressure washer

it feels good quality i used it all and no issues

Very handy replacement fuel hose. Easy to cut and fit. Good quality.

I used this fuel line to modify my heater to add a function to use either the built in tank in the heater or go to a separate jerry can. Increased the flexibility options for the heater. Fit fitting well and no issues so far.

Hose is fine, clamps are junk.

Ok