Simu Hz Mobile Transmitter 5 Channel (White) #2008806

Delivered exactly what I needed on time as promised.

Will need to use your existing transmitter (old transmitter) to program the new transmitter, so make sure your existing transmitter still works. To program the new transmitter you must match each channel # you are using on your existing transmitter to the SAME channel # on the new transmitter and program each channel individually (using program buttons on both transmitters). i.e: If your transmitter operates 2 different motor's using channels 1&2, you need to program channel 1 old with channel 1 new and then channel 2 old with channel 2 new.Lastly, my old transmitter did not have the program button on the outside back of the case like the new one does. It was inside the case.

Great remote that not only replaced a failed remote, but allowed me to program several others into it to have a backup for them. One thing to note is that if you're used to the older Simu remotes where the PROG button is under the cover, this one will trick you, because it has a false PROG tab where the old one used to be, but there's no button under it. The real PROG button is on the back of the case, you do not need to open it.In any case, I had a legacy single channel Simu Hz transmitter FR-70103 (p/n 2008799), and it failed. I ordered this one to replace it as it was only slightly more expensive than the single channel. I used my remaining good remote to set the roller shutter to programming mode, pressed Prog on the new remote for channel 1, worked immediately. So then I programmed channel 2 to a second shutter. Finally, I knew SIMU and Somfy were the same entity and there was some crossover in their remotes, so I set this one to channel 5 and was able to program 5 roller screens into that single channel from my Somfy remote. I've still got two more channels left and am already controlling seven devices with it.