Maxpedition Micro Pocket Organizer

Good pouch for a small tool kit. With enough playing around with various configurations, one should eventually find a setup that works for them.

Perfect edc carry for me small enough to carry with phone but large enough to fit all my edc carry tools.

I've tried many bags, this is the highest quality, outstanding

The Mini Pocket Organizer is a nice little pouch that is very durable and uses YKK zippers.I'll carry one or two of these as my edc/travel "power pouches", depending on my travels.One pouch is for my edc "on the road" cellphone charging and support needs, power bank, cables and 12v car charging, sim pin, wipes, flash drive and adapters.The other pouch holds everything I need for 120v charging at my destination, electrical outlet charger, cord, 3ft & 6ft cables, USB adapters and small portable SSD.I have another edc Mini pouch set up as small first aid kit for minor cuts and scrapes, eye drops, wipes, antibiotic ointment, etc.These pouches are made from a heavy 1050 denier material.This heavier material does help protect the contents, but since these pouches get packed in my backpack, it's an overkill on fabric thickness.I would have preferred a bit lighter and less bulky material like 800d or 600d.

Love these little organizers, super helpful to store your stuff. I will be buying this item again

Very good job on the stitching. I am always wary of pouches etc from Amazon. You just never know what the stitching is going to look like. I was very satisfied with the stitching on these. The materials are of excellent quality, and feel very solid and durable.Note that there is no attachment method on the back. Just a carry strap at the top. No Molle straps, no belt loop or clip. It is designed to be in a pocket. If it was on your belt and you opened it, its contents might fall out.It is small, but at the same time, it is not. It is small enough to fit in a pocket, unless you pack it full of items, or you have small pockets. However, it is large enough to store several items.It is truly a pocket organizer, holding all those small items you would otherwise stuff in several pockets.Here's what I have in mine:Outer mesh pocket:• PaperMate Inkjoy pen (shortened)• Whistle buckle• Sewing kit• Paper• Folding scissorsLeft side:• Nail-clipper through tab at top• USB flashdrive• Olfa Carton Cutter• Pocket Wrench IILeft pocket:• Ziplock bag with alcohol wipes, Band-aid strips, paper clips, twisty ties, safety pins, two split rings, fresnel lens• Paper with two binder clips• 6 piece tamper-proof Torx bit setMiddle• Hex bit adapter for Leatherman Rebar• Zip ties pushed through rim seams (11.5" by 1/8")(the zip tie head is a perfect tight fit for the square side of the adapter. It keeps the adapter in place securely with no fear of it falling out)Right side:• AmPro Precision screw driver set (4mm bits x10)• Coast G19• Leatherman Rebar• Mini Bic lighter attached to loop at top (secured with rubber band)• Mini zip ties in drinking straw• Hair band attached to lighterRight pocket:• Gorilla tape, common tape, and nano cord wrapped around plastic card___________________Some thoughtsThere is only one strap on each side. This means that if a small item occupies a spot, there is no way to attach other items below. If it had two straps on the left, you could secure several small items, like a battery, chapstick, pill fob etc. As it is, you have to either have space unused, or have small items in but not attached to anything. Ideally, it would have a strap tab at the bottom of the right side, to accommodate a small item horizontally below other longer items.I am very happy with it, but would like to see a redesign of this, with two straps on the left, and a strap tab at the bottom of the right side.Note: When it arrives, the paracord zipper pull will be tied in a simple knot using both ends. This is rather weak. I have included a guide for another knot. It will not come loose on its own, only if you deliberately untie it. It also keeps the paracord in an open loop, to easily put a finger through and open or close it.If you get the tan one, there might be tan thread visible along the black mesh outside. I blackened it with a sharpie and it makes it look much better.Photos:Contents as they are in and out of the pouch.You can push thin zip ties through rim seams inside.I also include a guide for the zipper pull knot I did.

I have both a micro and a mini. Both are great quality, excellent zippers. Like the layout and elastics for holding things. You do have to pack carefully to avoid items colliding when you close the pouch. Really like that you can open the pouch flat and have things not falling out all over the place. I have seen concerns about fake pouches - you can contact Maxpedition [email protected] if you think you got a fake. They used to be made elsewhere but are currently made in Viet Nam. Mine are from VN, so can't speak to previous source(s). An excellent product at a good price (and you can find on sale sometimes).