GeeekPi Fan for Raspberry Pi 4, Ultra Thin ICE Tower Cooler for Raspberry Pi, PWM Cooling Fan with Aluminum Heatsink for Raspberry Pi 4 Model B Only

I love this cooler for my Raspberry Pi 4. The temperature stays at 36 degrees Celsius. It's quiet, easy to install, and very compact.

The heat pipe+fan combo is definitely overkill for the tiny Pi. But it fits perfectly, it’s super quiet, and it keeps the Pi cool as can be. Oh yeah, and it looks pretty freakin cool as well.

Very well made. Pi hardly even warms up. Probably overkill, depending on your load, but it's easy to mount and keeps the pi frosty.

This works really well in getting the heat off the processor. With passive heat sinks in the standard Pi case the board was operating at throttling temperature all the time. With this cooler it hovers aroud 40ºC and never gets beyond 50ºC. The only problem is, there's no case for this or protection for the fan blades. We're running our two machines with a PI VESA mount on the back of the monitor. Since these are up agains the wall and only older family members using it the safey issue is minimal. Be aware that once you attach this fan, its more or less a permanent fixture on the board. It would be very difficult to remove it. I wish the fan connector was a 3-pin single housing rather than 3 separate connectors. Operation is quiet. The materials look a bit hand made but acceptable. What we really need is a VESA-mount box with a strong fan and duct system so there's plenty of air on all sides of the board plus a hat for an NVMe drive.

Great heatsink, I have to peg the CPU at 100% for several minutes before 60C is hit, with no fan attached. This could be used as a passive cooler with how much thermal capacity it has. I replaced the fan with a Noctua and configured PWM controls to keep things quiet. The fan that comes with this is loud since it has no speed controller, it’s to be expected on any 2 pin fan. Great quality product and very easy to use. I would buy this again.

Out of all of the cooling options I have ever had on a raspberry pi this fan is absolutely silent. I don't mean it's quiet I mean you can't hear the damn thing unless you got it 3 mm from your ear. Cooling is excellent 32 to 33° c on idle never gets above 35°c (95°F) on a Libreelec media system no matter what I am playing. 4K h265 h264.... Doesn't matter can't push this thing over 95 to 97° f even with an overclock of 2000 MHz on the CPU and 750 megahertz on the GPU. Using the standard can a kit black case that comes with the bundle had to chop it up and modify it a little bit to make it fit but there are plenty of case options out there that this will fit in. I have three pi fours running Libreelec in different rooms I have the original ice Tower on one this horizontal ice tower and one of the argon one V2 cases on another in the ice tower coolers are by far and away better than the Argonne one cases. The fan that comes with the argon one is garbage and it idles at 106° f compared to 90 to 91° f with the ice towers. I'm playing video on the argon one I will hit about 120 or more and I even used thermal paste on the argon case. If you're wondering if this works pull the trigger and just order it it works great and it's a great price I included a photo of the bottom because it seems like nobody ever does so you can see where the chips are going to come in contact with the bottom of the heat sink.

Worked very well and was an easy installation with a perfect fit. I had to use M2.5 x 10 screws for my configuration of an NVMe board for an SSD under my 4B Pi. I was replacing a previous cheap fan, which was noisy. This is extremely quiet and an enormous improvement.

Love it, 45 °C is the most I have seen from my crypto miners. was in the upper 70-77 °C over clocked and over voltage, now I changed the fan out for a WINSINN DC 40mm Fan 5V 4028 Dual Ball Bearing Brushless Cooling 40x28mm 2PIN. But it still outperforms the original Ice Tower with the same fan setup. Bigger is better, right?

This was a great buy for my Raspberry Pi 4B. It works as described and was easy to install. I went from about 55C to 35C as per the photo.

Love the performance of this unit. On another cooler I was running sub 70's on pi 4 core in a airconditioned space. After install rarely even touching the 60 degree mark... the low profile space saving is also a great bonus.

Easy assembly. I like that it comes with the plastic base so there is really no need to buy a case. Buy with confidence.

Great but if you want to use it with Raspberry Camera the cooler is too wide and the ribbon doesn’t fit despite the fact they created a space/route for it so you need to run the cable under the cooler.

The standard Pi screws are M2.5. Most other mounts will use this screw size. But this GeekPi unit uses a different standard. It seems this GeekPi cooler will not work on other mounts/cases. I was hoping I could mount the heatsink and fan on top of the pi and mount it on my existing rackmount pi unit. But the screw threads for the heatsink are different than the standard my mount takes.