E1 Max Electric Screwdriver, Mini Precision Screwdriver Set, 50 Magnetic Bits, Magnetic Storage, 5/32‘’Hex, Repair Tool Kit for Electronics Phone Camera Laptop Watch for Dad

The Fanttik E1 Max Electric Screwdriver is a great little tool, especially for detailed work like electronics assembly, computer repairs, or even simple tasks like installing light switch covers. It comes with 50 bits across 12 types, so you’ll almost always have the right one on hand. Everything fits neatly into a compact, well-designed case that magnetically holds the handle and bits, making storage and access really convenient. Some people mention that it’s not powerful enough, but that usually comes down to how it’s being used. For best results, you should first loosen the screw slightly by hand, then let the powered function do the rest. When tightening, do the reverse—use the screwdriver to get it in place, then finish by hand. Once you use it this way, you’ll notice it actually delivers impressive torque for its size. Overall, it’s a handy and reliable tool that’s well worth having around.

This electric screwdriver set is extremely convenient for anyone doing electronics repair or precision work. The compact size makes it easy to handle, and the electric torque is just right for small screws without stripping or damaging them. The 50 magnetic bits are well organized in the storage case, and having everything neatly stored makes it easy to find the right bit quickly. The magnetization helps keep screws in place, which is especially useful when working on small devices like laptops or phones. Battery life has been solid so far, lasting through multiple repair sessions before needing a recharge. The controls are simple, and switching between forward and reverse is quick and intuitive. Overall, this is a well-designed and reliable tool kit that feels premium for its size. It’s a great upgrade for anyone who regularly works on electronics or wants a cleaner, faster way to handle small repairs.

I have done a few quick tests to see if this is up to my expectations, and wow it it exceed them. Its powerful, compact, has extended bits, and has a very quality feel. I was worried that the bits would not be long enough, its been a problem I have run into even with expensive 100+ piece kits the thin extended bits that this comes with are going to be lifesavers no doubt. I did a quick test disassembling a GameCube controller, it had the tri tip bit I needed and unscrewed everything under its own power. I also tested some flatheads on light sockets, no problem. it put them back tighter than they were by hand lol. honestly this this is a STEAL for 50$ I had my eyes on a cheaper one for a while but I'm SO glad I went with this instead. I likely wouldn't have bought this at full price, but its a no brainer discounted. I only have a few small criticisms. because this thing is nearly perfect. my biggest issue is repairabilty, its why I got this in the first place. I work on LOTS electronics and gagets and 3d printers so being able to do something like replace the battery in the future would be a feature if it was truely perfect. I just remembered that it did my p1s hotend screws with a little effort, which was very nice, no more Allen keys! its possible that the aluminum tube chassis is removable, maybe it needs heat idk. its a problem for the future I guess. the only other thing I would change is really that I'd like more of these extended bits. They are just super nice and I'd like more sizes. oh if it had a bit of grip to it and maybe some texture on the buttons too, they can be a bit hard to find if you can't see. I did test some of my bits from another kit, some of them fit a bit too snug others for fine. none that wouldn't go in, but I had to wiggle them out. I included a video of trying to stop it by hand and it was pretty difficult. it really does have good torque. basically impossible to stop without a little more leverage (high torque setting in the video). I had held off on these for ages, as I had an "electric screwdriver" like 10-15 years ago that was so awful and thought they were all too weak and bulky to be useful. I expected this compact one to have so little torque it would be useless, the opposite is true it has plenty. it unironically has more torque than my brushed "electric screwdriver" I had ages ago, this was about 2.5in dia and 10in tall lol. the tech is there now, and the price is right. I've never jumped to give something a glowing review this fast before.

Convenient to have around and can use it for multiple things. It’s sleek and compact and it seems to be good quality. My issue is it only has one speed and is better at tightening rather than loosening. Sometimes it doesn’t have the torque to start losening the screw which means you have to take out another tool and deems it useless. You can’t expect it to be like a drill obviously but it’s nice for small things.

I saw it online and had some doubts due to the price tag, but after receiving it I can say that the high price tag is justifiable - this kit is built like a tank! Amazon currently offers this item in a bundle that contains both the E1 MAX Electric Precision Screwdriver and the X5 Max Manual Precision Screwdriver Set, which is what I got since it's in a more reasonable price than buying them separately. I highly recommend to buy them in this bundle, especially if you're located outside of the US where you have to pay shipping and import taxes. As you can see from the attached picture, both enclosures are in the same size and they sit nicely next to each other - you really can't go wrong with this bundle as there are tasks for an electric screwdriver and tasks for a manual one, so this bundle covers you from both directions. I didn't rate the battery life as I just got it. Though, by the build quality I'm pretty sure that the battery is very good. It comes semi-charged so I recommend to give it a full charge into the night when you first get it. Highlights: 1. The overall build quality is tough and well made. 2. The magnetic force of the bits, the case and the inner shaft of the screwdriver for holding the bits is strong and everything stays in place, even when you shake it. 3. The screwdriver has a modern USB type-c for charging which is very common nowadays (note that I actually tried the provided USB cable with my phone for transfering these pictures to my computer, but it only charged it. So I guess this particular cable is only for charging). 4. The screwdriver has 2 modes - low and high, and the motor seems very strong; you can't interfere and stop it by hand - exactly the strength I was after for screwing screws into my 3d printed parts. 5. The spring patent where the inner container can pop-out from the outer enclosure is very neat! When you're done, you just slide it in again, give it a push until it clicks, and then you just insert the screwdriver in and gently push its end until a magnet captures it from the inside for a nice flush storing. Bottom line: Highly recommended.

Additional Edit: The company sent me their larger, but still conveniently small drill to test. It was hands down the best non-pro drill I have used. I will be creating a review for it, but this company has some GREAT customer service! EDIT: Upon review, I believe the mistake is mine. The description I see today is as below: " Ideal for tablet computers, mobile phones, watches, electronic bracelets, cameras, precision instruments, etc." Which does NOT list Personal Computers, who have much larger screws and are much more difficult to get out. In fact, the device states it is for work with delicate electronics, and I would definitely not place the PC's I work on as delicate. On top of that, the company contacted me almost immediately and responded to my problems, offering to replace the screwdriver at no additional cost. I believe that type of commitment is worth its weight in gold. Please note the company did NOT ask for a positive review in exchange for a newer product. As such, I have edited my review from the original to be more accurate. PROs - This is a neat unit and design idea. It got a lot of compliments. - Battery life is good, I tended to just leave it on the charger overnight when it ran down. It then went for weeks of intermittent or 2-3 days of frequent use. A day or just under for (my) constant use. - Materials are quality. It feels good, bits are solid. - The storage and bit choice is excellent. There are a lot of different bits and several tools in the case. My old sausage fingers found them relatively easy to pop in and out. Bit storage slides easily in and out of the case. I dropped it once or twice and a few bits fell out but most remained in the case. CONS - The only real CON is easily solved with a small carry bag or case. I forget if they come with one, but make sure you keep it if they do. The screwdriver pops out of the case , but if you free carry this, it can pop out if brushed up against and disappear between some car seats [for a totally random example]. Again, easily user-solvable, but something to be aware of. I kept my work tool in the box it came in. The only other possible con is that it is not magnetic, so putting screws in can be tricky. That being said, you don't always want to have a magnetic screwdriver around some electronics, so it's not really a negative. I would suggest an upsell of some magnetized tips for glasses or small craft work. OVERALL Like I stated, a great company, obviously looking to protect their brand by actually helping customers and attempting to solve their problems. I'd recommend buying whatever you're interesting in from these guys. Work with them if it's not meeting your need.

This is one of those tools you don’t realize you need… until you have it and then you use it all the time. The Fanttik E1 Max is perfect for anyone who messes with tech phones, cameras, laptops, even small household fixes. It’s compact, super clean-looking, and feels way more premium than you’d expect for the price. What really stands out is the precision and control. It has multiple torque settings, so you can handle delicate electronics without stripping screws, but still has enough power for small DIY projects. It’s not meant for heavy-duty work, but for anything detailed, it’s spot on. The 50 magnetic bits are a huge win too. You basically have every size you’ll ever need, and the magnetic case keeps everything organized and weirdly satisfying to use. No digging through a messy toolbox. Another underrated feature: the built-in LED lights. Sounds small, but when you’re working inside tight spaces (like a camera body or behind a panel), it actually makes a big difference. Battery life is solid as well you can get through a ton of screws on a single charge, and USB-C charging keeps it simple. Pros: * Super compact and premium feel * Great torque control for delicate electronics * 50-bit set covers basically everything * Magnetic case is clean and easy to use * Built-in LED lights for tight spaces Cons: * Not made for heavy-duty or large screws * Slight learning curve if you’ve never used electric precision tools * Case design is sleek but not the most ergonomic for everyone (some users mention this) Overall: If you’re into tech, photography gear, or just like fixing your own stuff, this is a no-brainer. It saves time, feels great to use, and makes small repairs way easier. Rating: 4.7/5 one of the best small tools you can keep in your setup.

I returned another electric drill because it felt cheap and got this one instead and boy am I’m happy with the results. Love everything about this one, the drill has good torque, not the strongest (and I wish there was one more setting for higher torque) but the high torque option works well. I repair electronics and this screwdriver get the job done no problem so far. The bit are 10/10 quality, the compact casing is a 20/10. whoever designed this is genius. Has other tools that fit right in the casing as well

Très pratique, esthétique, léger….

Viene de lujo para trabajos de precisión. Muy buenas terminaciones

デザインがすごく良いです。まず外見は工具感がないので、机の上にそのまま置いてあっても無骨感がありません。そしてよくあるようなドライバー型でもないので、転がりません。 肝心の使い勝手は全く不満はありません。 もちろん力が強いわけではないので、しっかり締めることはできませんが、そもそもこういう精密ドライバーでは力の入れすぎはねじ山が潰れますので、おそらくこの程度のトルクが適切なのでしょう。 価格がやや高いと思われるかもしれませんが、今ならディスカウントで安くなっていますのでお買い得です。 使わないピットも多いですが、これがあればいざという時、特にガジェット好きの方には最適です。 実際に私も特に今すぐ使う予定はなかったのですが、そもそも電動精密ドライバーは持っていませんでした。しかし、時々必要になる時があるので、そんな時のためにいつかは買いたいと思っていたですが、この商品を見た瞬間即決でした。購入後、早速テストも兼ねて、身の回りあるオーディオンターフェイスやアンプ等々を分解してみました。すごく心地いい感触で使い勝手も最高でした。 全てのガジェット付きにはおすすめです。やや重量はありますがカバンに入れておけばいざというときドヤ顔できる一品です。

I’ve been wanting one of these for so long, but it was always out of stock whenever I tried to get it. Finally, I managed to grab one, and it’s a must-have for any PC builder. The quality is excellent, and it comes with all the bits you'll need. The screwdriver itself isn't too powerful, which is perfect for building a PC—too much torque can damage your components. I’ve only charged it once since I got it, and it’s still going strong. I use it weekly, and it’s been fantastic!

Très solide. Et très pratique. Bon pour le service.