EPOMAKER TH80 Pro Wireless Barebones Keyboard Kit, 75% Hot Swap Mechanical Keyboard Kit, Bluetooth 5.0/2.4GHz/Wired RGB Gaming Keyboard, South-Facing LEDs for Win/Mac/PS5/PS4/Xbox (White)

I have always been a budget keyboard person. This keyboard is quite good quality for the price. It has dampening foam and overall feels really nice and sturdy. I got a different cable for this keyboard, displayed in the 2nd photo, and it completes my setup. I did notice that there seemed to be a connectivity problem. Occasionally my keyboard will just reset itself while in the middle of typing or playing games. It's not a big deal but it is a little unfortunate when it happens in the middle of a game. I don't think it's my cables, but it might be the board itself. As you can tell from the photos, I've used 2-3 different cables including the one they sent. Overall it is a very good keyboard. I enjoy the sound, feel, and aesthetic of the keyboard. UPDATE: Keyboard literally broke. I have tried multiple USBC wires and the keyboard will start for 1 second or not even start up at all. There is no lights. I was going to get a replacement, but unfortunately I've had the keyboard for a little past a month so I cannot! So for reference, it was a month and 4 days until this keyboard died.

This is my first custom keyboard kit that I've built in. Honestly just banging out this review as an excuse to type on the thing some more, as I'm nowhere near an expert on these things so you probably want to listen to one of them over me. Despite the keyboard being plastic it was a lot heftier than I expected and definitely feels solid and quality. Again this is my first build so have nothing else besides steelseries and razer crap to compare it to. The plastic clips holding the case together are really annoying to undo, really would've just preferred a few more screws instead. I removed the stabilizers to lube them but upon taking them apart I couldn't find anywhere that wasn't already adequately covered from the factory, in some cases there was a little too much lube even. Ive seen reviews on youtube about the stabilizers being a little under lubed so it seems like Epomaker took this to heart, perhaps even overcompensating. I used Gateron Milky Yellow switches and dye sub pbt caps. I also did a tape mod, which was extremely easy on this board, just make sure you dont cover the rectangular hole on the pcb where the 2.4ghz dongle slots in or you'll have to clear it to mount the pcb in the case like I found the hard way. keyboard sounds good, nice and low pitched, but that is also due to my choice of caps and switches. Did the tape mod off rip so not sure how much this effected sound from stock but i love how the sound turned out so Id recommend trying if you are going for that lower pitched poppy thocky sound. I mainly chose this over some other options in the price range due to it supporting bluetooth and having some positive recommendations on youtube. It didn't disappoint. for a little over 100$ all in I built a board that smokes plenty of higher priced gaming keyboards. Sad to retire my apex 7 it served me well but I'm quite satisfied with the custom experience.

Depending on what you're looking for, this keyboard may or may not do it for you. Full disclosure, I bought this as a backup keyboard for situations in which using a Bluetooth keyboard is more convenient for me. My main keyboard is actually a much higher-end wired mechanical keyboard. I already had spare key caps and switches, so their cost does not affect my opinion of this keyboard (but it may affect yours). I give it a solid 4 stars. Things it has going for it: - 3 separate profiles for Bluethooth connectivity. Means pairing with up to 3 devices at once and switching between them with a Fn key combination. Handy. - Option to use a 2.4ghz USB dongle is good. The fact that the dongle has a slot to store it inside the keyboard is also very nice. - Looks good. It's kind of a smaller, plastic, version of the GMMK Pro. - Portable. Size and weight are nice for travel (which is one of my main use cases for it). - Nicely packed, came with a nice braided USB-C cable, the 2.4Ghz dongle, and a keycap puller/switch puller tool combo. Things that I wish were different: - Uses proprietary software, so if you're used to using open source firmware to program your keyboard, then you're out of luck. Also, you're at the mercy of the manufacturer as far as how much support you will be able to get (although read my note at the end). - Some keys are hard-coded to some of the wired/wireless and RGB functionality (maybe out of necessity). Would be nice if you could work around some of that with custom firmware, but this would lead you back to my previous point. All in all this is a very solid choice for the price point if you already have the rest of the components lying around. Note (11/14/2024): I re-evaluated my review after I had an incredibly good experience with their support staff. I had an issue with the software not letting me reconfigure the keys correctly, and I was suspecting that I had a bad keyboard. Turns out that it was a software issue and they responded by updating the software to fix the bug. I have no major complaints right now about this keyboard.

Very nice keyboard considering the price tag, sounds and feels great to type on, the stabilizers are good out of the box and the knob turns nice. Only real complaint is that for some reason when pressed, distance that makes the knob click isn't actually far enough for it to register the push, you have to push it even farther, which like at that point why is the click even there yk? Other than that people who want super bright rgb should probably look elsewhere, it's perfectly visible but it's not super bright. Most people myself included won't have a problem with this but if you want your keyboard to dazzle spectators with blinding lights then that's not gonna be what this is. Ok I've rambled for too long, overall very nice keyboard 100% would recommend if you're looking for an affordable board but don't want to compromise quality.

I built this with Gateron Baby Kangaroo 2.0 switches and XVX Side Print Shine Through Double Shot PBT White Caps . Super premium feeling at the price point I paid which was about $125 dollars all in with my switches and caps. The software to reprogram keys or knob is super basic but maybe they'll improve it. Works fine though no complaints. I love my new keyboard I built and I recommend it as a base to anyone looking to build a keyboard at a great price. You can get cheaper switches and caps and have it built for under $100 or buy the prebuilt and upgrade later. Either way you have Bleuetooth, 2.4 GHz, or wired, and 3 programable layers. This is my review as of 11/5/23. If anything changes I will update this review.

Super solid entry level option. I used this for my first attempt at a very beginner board, using Akko lubed lavenders and some generic xda keycaps. This thing is mad solid, no creaking, good weight and feels like quality construction. The LEDs look great even with solid keycaps, and get decently bright. Keeping brightness around 50%, battery life on this has not been an issue either. You can easily get a week of moderate usage out of it. The wireless dongle works totally fine, I haven't tested the Bluetooth yet but I imagine it's similar. I honestly love the knob too lol, a big improvement over my previous setup. All in all I'm super pleased with this, and would definitely recommend to a first timer!

Good price for a silent keyboard base, if it worked. I’ve had this keyboard for around a year and since then, over 8 keys that are frequently used have stopped working. It will be super chittery like the connection is loose. I would HIGHLY recommend staying away from EPOMAKER and their products.

Bought this as I had some switches and keycaps that I wanted to make use of. I did have to buy a second board and return the first as one key was not working. In contacting support we concluded it was probably a problem with the pcb. So far the second keyboard is fully functioning and is great. This is a great first kit for those who are just getting into keyboards. The hotswap sockets are beginner friendly as long as you are careful inserting switches. I managed to bend one switch pin because I was going too fast, but nothing broke. The software is limited, but you can also change the color/light pattern from the keyboard using fn + \.

Bought this for my third keyboard build and it did not disappoint, very nice build quality, knob works great, RGB is a bit mid but I don’t use RGB for my keyboards. These very little flex in the pcb and the stabilisers are pretty good quality

When you use this keyboard, you can feel how high the quality is. It's not some cheap plastic and the RGB colours are really pretty. I dislike keyboards that don't have separate function keys like 60% keyboard, so 75% - 90% are my favorite types, and this one isn't an exception. If you're the same as me, get this keyboard because its really nice to use. <3

E’ molto robusta e solida. Ottima connettività sia con i vari dispositivi bluetooth e sia con il wireless e cavo. Forse una pecca,il pulsante di accensione sotto la scocca. Tutto ok, non la spengo mai. La batteria a me che la uso parecchio dura 3-4 giorni. Nessun problema con l’installazione dei switch e delle keycaps. A , poi è anche molto silenziosa, come piace a me. Bella , ottimo acquisto!

really great and good , you need to charge it and it has multiple colours to use

5 Stars been using for 6 months all leds keep working perfecly differently from others i have used