CreativeSound BlasterX AE-5 Plus Pure Edition SABRE32 Ultra-Class 32-bit/384kHz PCI-e Gaming Sound Card and DAC with Dolby Digital and DTS, Xamp Discrete Headphone Bi-amp, 122dB SNR, RGB LED Strips

Update 2019-01-26: Regarding the issued with the line in not being detected, I have been in contact with Ceative, and I must give them a big complement, as they have been in touch regularly and fairly quickly. With their help, I was able to solve the issue, sort of.If you need to use line in, then it will work if you remove the front panel connection from the card. Once I did that, the line in option magically appeared. The person working on this case informed me that he will let the relevant people know about this issue.Again, I am impressed at the efficiency and accuracy of their response. I have upped my rating to 5 stars.Original review...As far as sound goes, this is much better than my on-board sound. I have no use for LED lighting, I never have, so I have not connected the LED strip.A few things bug me about this card, or more to the point, the software used to customize the sound. There are 2 different software packages. 1) The older Sound Blaster Connect 2 and 2) the newer Sound Blaster command. I prefer the sound blaster command software because the interface is better and more logical. However, with the Command software, there is no customization or settings for the LED lighting. As I have also discovered, you cannot use Line IN as an input if using only the Command software. Line in does not appear in windows sound settings either. When you choose the multi Input configuration the only choice is Microphone or Front Panel Microphone.Upon installing the older SB Connect2 software, I was able to enable the line in as an input, and it also appeared in the Command software. The connect software does not let you adjust the speaker and input volumes, the balance and quality settings - these must be done through the windows sound settings. Why??? It also does not show the "What U Hear option. Again, a visit to windows sound settings is necessary to enable/adjust this. The newer Command software allows all volume/balance and quality settings to be made without the necessity to visit the windows sound settings - which Microsoft has made very well hidden.So to achieve full functionality from this card, you need to use 2 different software packages, which will both run in the background, wasting system resources. It might be nice if Creative created an all inclusive software/driver package that let you do everything in one application. Having to use 2 different software apps is not very "creative" at all.You can output up to 32 bit 92kHz with sound settings enabled and up to 32 bit 384kHz with Direct Sound turned on - this disables all sound enhancements (EQ, SBX). You can record up to 32 bit 96 kHz, which is fine for me as I use 24/96 to record my vinyl. There is a variable gain headphone amp, but it's not clear if that just applies to the back headphone jack, or to the front one as well. Which brings to mind another annoyance - the SB cards use to have the option to mute the rear line outs (speakers) when headphones were plugged into the front - not so anymore. You have to open the software (either one), and select the headphone output manually.Sound wise, the quality is great, but the software options kill what should be a pleasant experience with this card.

I was never a real fan of the RGB craze. I mean it is cool, but it was all fluff.. I am silicon dating myself here.. I remember going to Electronics Boutique's (before it became EB games) at the mall and EggHead looking at the newest sound blaster 16. Then I remember getting the Audigy and then Audigy 2.. then the RX... but that was all before 2008ish... Creative kinda went silent when it came to innovating the next big audio jump.. I do not blame them with MP3s with so called "cd quality" - 128bit I mean what was the point? 24bit audio was way more than enough. recording while respectable still did not hold their own to the dedicated capture cards. They re-focused their attention to other products.Then they came out with the 32bit pro audio. FINALLY. Not that it really means anything at this point. I do not know of anything out there that can take advantage of that kind of fidelity. I was excited to see the AE-7 card designed for gamers. 127db 5.1 discreet surround or 7.1 virtual. with a ESS SABRE 9018 DAC. Plus a custom Bi-amp dedicated/designed for audiophile grade headphones with an impedance of 1 - 600ohms.I picked up this card because a neon green brand with 3 snakes told me I could no longer get replacement ear pads for less than a two year old headphones from them and they recommended I get new ones. So I did.. I picked up the EPOS I Sennheiser GSP 600. Respectably a starter audiophile headphone. amazing gaming headphones. I spend most of my day on headphones from work using MS teams, music.. Pandora, FLAC, or movies either digital or streamed. they all sound amazing. audio is super crisp. Windows 10 did not have a issue with the drivers like some other card MFGs.Their software is actually really good. like Nvidia as with optimized graphic profiles per game they have done the same type of optimization. Like an EQ but it is much more tuned to the type of game than just adjusting hertz. I probably hear the footsteps in CoD much clearer and louder than my opponent.I think the days of games having tailored audio based on the chip (like what they did with Audigy) are gone, but I think creative has taken the correct step in still being able to bring you that type of experience.This is not a cheap card, but IMHO it is the best card when compared to the other cards on the market at a similar price point. it does not have all the added accessories like some of the others, but I think if you were able to put them head to head you can hear the difference. If you plan on using $30 headphones I wouldn't bother.It is a lot harder to gauge audio. everyone hears differently some folks hear frequencies better/worse than others... and you cannot really pause it and study the difference like you can with a graphics card or tv. I can tell you that for me personally. I can hear the difference. I have had a noticeable difference in my gaming performance across the board. music sounds better. The mic is really good as well. I can speak normal and have not had a complaint from anyone that I was too loud or to soft. no hissing or buzzing. Even though that is more of a headphone thing it does attest to the protection they put in place on the hardware to minimize EMI interference from the rest of the PC components. That being said I would still recommend putting the card as far away from the other cards as possible! lol.I do have one gripe. switching between the headphone and speaker inputs is done in software. not a big deal it opens quickly and is easy to get to I just wish there was a toggle switch I could add to the taskbar or a right-click option on the service icon in the notifications area or a button/switch on the volume command thingy that sits on your desk.Anyway... that is it. I hope this helps you decide one way or another. OH for those looking for some RGB goodness it has some.. minimal but some. just my style.