Learn More >

Spectacular science is at work here.. This adhesive quite literally cures under UVA light. You apply it to your part which requires repair, hold it firm, turn on the compact single (extremely bright!) UV-A L.E.D lamp that is included with the adhesive.. pass the UV light close by the glue, and move it about so that all the glue is shined on, and then within about maybe ten seconds maximum, the adhesive is fully hardened and the repair is complete!! No more sitting there, holding parts together for twenty minutes while you blow air on it or something .. this stuff saves a ton of time. Just dont be applying it to something while in direct sunlight or the sun itself will end up hardening the glue before you realize it! Sunlight does of course, emit all UV wavelengths of light, so be mindful of that and just use it indoors. You are gonna love this stuff, but you'll likely run out of it before you know it. The green plastic housing actually contains a small metal tube container (like a typical metal tube of cyanoacrylate "super" glue is usually sold in. The inner container is a bit small, so it doesnt last all that long, however, many many repairs will be made during its time!

The TOP GLASS shelf of the table in the picture unexpectedly fell off. It was held on with clear UV glue at two mounting blocks which is screwed to the chrome base. They are in the back where the lamp sits. Following the instructions I cleaned the surface and carefully marked the mounting points - which turned out to be the hardest part of the repair. Applied the UV Glue, and used the supplied UV LED light to initiate the process. I left the mounting blocks and the glass for whole day in sunlight on my patio. Then mounted the glass with the screws and blocks back to the frame and crossed my fingers !!! You can see the mounting blocks better on the bottom glass in the picture. It is now about month since I made the repair and the picture shows it worked perfectly. The bottom glass was mounted by the factory and shows no sign of failing - YET! Recommend as long as you clean the surface with acetone and alcohol and use the glue sparingly and start the process with the supplied UV LED light. Getting the mounting blocks set properly and in the right location during the process is critical, since once the glue adheres there is NO WAY to adjust the mounting blocks.

A game-changer in the world of adhesive products. As someone who has tried their fair share of glues, I was blown away by the performance of this product. The fast-curing LED light is a real game-changer. It sets the glue in just a few seconds, which is incredibly convenient when you're in a hurry. I've used this glue for everything from fixing broken toys to repairing jewelry, and it has never let me down. The precision tip allows me to apply the glue exactly where I need it, without making a mess. One of my favorite things about this glue is that it's waterproof. I've used it to repair my daughter's swim goggles, and the glue has held up perfectly. It's also heat-resistant. The size is also a great value. I've used this glue on countless projects, and I still have plenty left in the bottle. It's definitely worth the investment for anyone who needs a reliable adhesive. Overall, I highly recommend Krazy Fix Light Cure. It's a must-have for any DIY enthusiast or anyone who needs a reliable adhesive.

This superglue works great the first time you open and use it. You pretty much just turn the cap until you hear a click and that means the cap has punctured the seal and you can begin use. You can squeeze on the sides in order for it to come out. If you are able to use the whole thing then it is great but this does not store well even if it is completely (capped) sealed. I thought it would last awhile so long as you air tight it but honestly it did not store well the next time I used it. The glue becomes more of a putty after a few days. It will not squeeze out. You can still apply it and it will stick but it is super hard to really apply it evenly. You can use a tooth pick but it honestly just sticks to the tooth pick. It is pretty much worthlesss. The light is okay but it is easy to lose as it is not exactly attached to the actual glue piece. It does a good job with curing quickly but avoid looking directly at it. Overall I think this is not really worth it UNLESS you are going to use the whole thing at once. If you are only going to use a little bit just know it just becomes a putty after only a few days even with the cap sealed.

The best glue ever! I even fixed my broken glasses, and they are still like new a year later. The glue literally creates a strong plastic bond when cured with the light. I was bummed when it was out of stock for months. I just received a new one today and was able to fix my blender motor housing that came apart. Please don't ever stop making this glue!

The glue is awesome. It dries clear and even dries quickly when it’s laid on thick. The lights pretty puny and weak. I’ve used a competitor’s product from the local hardware store and the light was stronger for a similar price.

The good: Once you get this stuff to cure, it is SOLID. It does cure very quickly with the right amount of the right kind of light *(+2 Stars), but... The bad: There was no "Supplied LED Light" as noted in step 5 of the instruction. The packaging clearly has a place for it, so maybe the item sent to me was a QC error, but I can only write my review based on what I recieved, or in this case, what I didn't receive and since the missing part is fundamentally crucial to the product... *(-2 Stars) The Ugly: I have no points to bring against this product as "ugly". Honestly, I am bummed out. I really wanted to give this product a better review and this product is easily a 5/5 star product... if it is complete; but a light curing glue that is supposed to include the light source and doesn't is not scoring points with me. In conclusion, I do recommend this product as it does work. I was able to substitute a very bright LED flashlight for the missing "provided LED light" and that got it done, so all in all it works very well, just be prepared to improvise... *I start my reviews at 3 points, and give or take up to 2 stars to raise or lower the review based on my experience with the product.

I didn't expect this to wow, only that it would be like regular superglue for the impatient, but I am very surprised and impressed. I first tested on two small pieces of metal with a small dab of glue and I cannot manage to pull them apart. After the test, I proceeded on to the reason for this purchase: a beloved plastic play horse whose leg had broken for at least the 3rd time. I had previously tried regular superglue, Gorilla Glue (a staple in my home glue arsenal), and Sugru. The regular superglue had failed immediately, and the GG wasn't long-lived either. The Sugru lasted a year or so until it, too, succumbed. I ordered another packet of the Sugru but decided to try this first just in case it would work better than ordinary superglue. Great googly moogly this stuff is strong. And best of all, I don't have to be patient or rig some contraption to support an item in place for hours while it dries. I tried to clean off all the old repair materials, though I'm sure it wasn't completely clean because I can't even get the leg pieces together close enough to avoid a gap anymore. I initially applied adhesive to each side of the "wound" and held them together while curing with the light. It was fairly strong at that point, but given this is a kids toy, I decided to run a thin bead over the wound like a scar and after curing I think magic horse will live for forever ... unless someone manages to break her in a way glue can't fix (like scissors to the mane). I don't care for the plastic case that wraps the tube of adhesive and wish I'd pulled the bottle apart before piercing the top of the product package. It's a little hard to get a good feel for how much adhesive I'm about to dispense. It's also a huge waste of plastic so I really wish Krazy Brand would sell "refills" of only the small tubes of adhesive with no case or light included. I know, I know, they'd be full of reviews of angry people who say they let their item sit out all night and the glue never cured, because they couldn't be bothered to read the package to see they need to cure it with UV, so these have to be distinctive from their regular superglue products, but I'd rather get a little more adhesive instead of all this extra packaging that will go to the trash once I can't get out any more product.