035 Flux Core Welding Wire: E71TGS Gasless Welding Mig Wire .035 Flux Core Weld Wire Dual Self Shield Flux Cored Welder Wire Spool Mild Steel Mig Wire Flex Welding Fluxcore Wire 2lb FCAW 0.9mm

Good value for the money. It performs well and cleans up well.

This flux core welding wire welds as good as any I’ve used. It did seem a little dirty on the spool but I run my wire through a cloth soaked in cleaning and lubricating fluid as it comes off of the spool. This makes for a much cleaner weld with less splatter. The wire welds good for me and I will use it again in the future.

I've used the wire on 3 different occasions and the wire somehow jams up my welder and I had to cut the wire and re-feed. Total of 4 times so i've lost about 20 feet or more of wire. Never had this issue with any other brand whether it's more economical priced or Lincoln wire. Gonna pick a different brand next time.

This wire worked very well for me in all aspects. There was one odd thing in that the box is labeled .030 and 0.9mm which is not correct. it is, in fact, 0.9mm wire which is 0.035 - found out for sure when I put on the contact tip. Other than that I was able to get good starts, good penetration, and good beads with minimal splatter, which is a bit of an accomplishment for an amateur hobbyist like me. I look forward to getting lots of practice and some projects done with this spool.

This is very comparable in price to hf wire, without out the trip to the store or gas consumption! Works good and I have nothing bad to say about this wire. Good value at a good price!

Husband likes it! He says it works great with his welder. It feeds naturally as it should and he hasn't experienced any tangles or hang ups. It burns nice and neat and the welds have all held up strong. So far, so good and it's worked great for everything he's used it for. He's really pleased with it and the price was reasonable for the quality. Highly recommend!

As with ALL Flux Core Wire (using NO shielding gas).... The best wisdom I can impart to anyone is buy a great welder first. If you spend the money on a decent welder FIRST, 240V, with an excellent adjustable range of control on the wire speed and the current, you can "DIAL IN" within 2 mins and/or 5-6 passes of the welder, PERIOD. I was able to literally load this wire, test pattern a few areas of the small, thin metal tubing, and weld it thoroughly in 5 minutes. No splatter, very clean.

No complaints about the quality of this E71T-GS spec flux core wire. Spool mounts perfectly inside my MIG flux core welder, 0.035”/0.9mm size is perfect size and feeds without a hitch. Test with this wire show it is as good as any for the jobs.The issue I have is price. You can easily find good 2 Lb. spools of 035 E71T-GS spools on Amazon for under $10, which is half this cost but I see no different in quality or performance. Why this is twice as expensive I just don't understand. It works fine, it just cost too much vs. other brands out there that do the same.I say search Amazon and you can find better deals for 2lb E71T-GS 035 spool. This is a five star product but at a one star price point. For that reason, I'm giving it the middle at three stars. Drop the price to half where others like it are, and it could be five stars.