Ulka Model E water pump, type EP5, output: 48W, original

Bought this to repair a friend's Delonghi Magnifica which suddenly stopped working. I was a bit surprised the pump had failed because it sounded normal when I switched the machine on. Easily diagnosed by disconnecting the valve on the output side and seeing if any water comes out when you run the pump. I also checked the filter and flow meter to see if they were blocked. The pump swap is quite easy, with just three tubes and two electrical connections. The pump is just held in place with two rubber mounts. One of the electrical connections incorporates a thermal sensor which was glued in place on the old pump. It was easily removed and I secured it in place on the new pump with a hot glue gun.

Refitted to a 2011 Gaggia Classic. Easy to do. Follow several 'How to' videos on You-tube for guidance. My initial problem was the pump was making its usual pumping noise but no water out of the group head or the steam wand. Took me 1 hour to change. Now fully working with the new pump and better than before.

Pump was purchased as a replacement for a Delonghi Magnifica coffee machine. Arrived swiftly and was well packaged. It was a fairly simple job to fit, 3 pipes and 2 electrical connectors to transfer from the old pump. Took about 40 mins to fit and test

Although I had to take the water pipe fitiing from the old pump and fit it to the new pump. This worked a treat and now my Gaggia Classic is back to working like new.

Easy to fit into our gaggia classic and seems to be more powerful than our previous replacement pump. Excellent build quality and good value.

Perfect replacement pump for a Gaggia Classic and excellent value too. No problem to fit and worked first time.

Easy Replacement to a European 230V, Gaggia Classic. Important Note: before disconnecting any cables from the pump, you better take a picture of the colors of the cables and their place. Videos on you-tube, or service manuals on internet mainly show 110V Gaggia, which has different cabling and colors

Bought this to replace a seized EP7 water pump on my wet and dry valeting machine ,was,nt sure it was going to work, after looking at the specs on the label they looked the same as the ep7 so took a gamble and it payed off now my machine is back up and running .

Installed and the coffee machine started working again.

Bomba de agua para cafeteras. En mi caso la he comprado para sustituir una bomba de una cafetera DeLonghi, la referencia es la misma. Me ha funcionado genial, y realiza su trabajo perfectamente. La antigua se estropeó por culpa de la cal. La experiencia con este producto ha sido muy positivo.

ممتاز و نوعيه ممتازه

Utilisée pour réparer ma machine à café De Longhi. Un an après, elle fonctionne très bien. Robuste et de bonne qualité.

I replaced both the valve and the pump. Still no water coming through the brew group or the steam wand... Any ideas where the problem could be?