168WLED Ultinon LED (White), 2 Pack

Helped a friend replace the license plate bulbs for a 2015 Camry. Reasonably easy to install. You just pop out a couple of plastic frames holding the light housing in the trunk and either push from behind the housing (inside the trunk behind the liner) or pull the housing out from the outside. Be careful to pull gently so as to not break off the clips holding the housing in. Also, be sure to wear gloves, otherwise the natural oils in your hands and fingers will shorten the life of the bulb. If you are using different bulbs, be sure to change both of the bulbs at the same time. Otherwise, the license plate will look like David Bowie's eyes at night. For this specific vehicle, changing to these LED bulbs not only improves the visibility of your license plate at night, but also improves upon the viewable area of the backup camera, so this is not only a great aesthetic upgrade, but also sort of a safety upgrade. The bulbs themselves are a very nice bright bluish white. My friend was so impressed with these bulbs, we bought one for my friend's 2010 Altima Hybrid. This car was even easier to install. Pop open the trunk and remove the clips closest facing you and the couple clips in the middle of the internal trunk liner. Pull back the liner and you should see the 2 light bulbs connected via cable. Bulbs are in a plastic socket that releases if you give it a firm quarter turn to the right, but be sure to disconnect the power cable first. The bulbs then unplug very easily. NOTE: If you plug in the bulbs and they don't work, simply flip them around. Apparently, on the Altima, the bulbs only light up if they go in one specific way. Update: Apparently these are also the standard bulbs for side marker lights (Star Trek Joke: THERE ARE FOUR LIGHTS!). Strange thing, most Gen 6 Camrys I see on the road have blown out side marker bulbs. I have helped half a dozen friends change these out. You need smaller hands to reach into the engine to change out the front set.

I got this to use in the trunk area of my 2023 Subaru BRZ. This bulb is a perfect fit and provides a lot more bright, white light compared to the stock incandescent bulb (see photos, although sometimes it’s hard to tell in photos). This one does have polarity so make sure to test it out before you put things back together as you might need to insert it the other way around to get it to work. I’ve used Phiips bulbs for years and they tend to last much longer and work more consistently than the no name off-brands that you can find much cheaper. Philips is worth the higher price for something you don’t have to replace very often.

Plugged in and works as expected on my older car which is a 2nd gen Prius. My other car which also uses the T10 bulb cannot detect it and shows on the dash that the bulb is out (2007 Porsche 911). I decided to do a tear down and see what’s under the hood. The bulb is simple in its design as it only has a diode for im guessing to protect the LED and a resistor to lower the voltage to accommodate the LED lower voltage requirements. Some of the other brands sell bulbs with multiple pieces of components in their design which offer are prone to fail. The Philips design emits less heat from the actual emitter but the downside is heat builds up internally in the resister component area that has no way to escape. Overall, it’s a simple yet effective design that consumes about .5w of power and is plenty bright. I removed one star because of having to install it in the correct position to get the positive polarity. Most sockets are not marked which is the positive side, so if your bulb doesn’t come on you have to remove it and flip it around.

This product is reliable. I have them installed on my Lexus ES350 for parking lights. 3 years later and they're still going strong with no issues. These particular bulbs I installed for my siblings 2016 Toyota Corolla. Although the license plate bulb calls for 194. These 168 have the exact same base. The difference? 168 is brighter and higher water than 194. These also provide more ground light to help the backup camera see at night too. The color is a nice cool white, makes your ride look modern, Phillips is a reliable brand and you never have to worry about these burning out. Get em! To install on the corolla, you need to squeeze a little clip on the left side of the bulb housing. It's the same on the passenger side bulb. Then twist the black adapter to access the bulb. If the LED doesn't light up, flip it around and it'll work.

A nice white color and very easy to install. Like the other philips leds that i have installed they aren’t very bright. I would go for other brands with projector lens.

So if you an older Prius then you should be aware of the license plate lights; because of their poor design, the stock bulbs tend to melt part of the bulb holder and will also burn out the bulb. I ordered the 168's for the license plate lights and the front parking lights for the Prius as well as the front parking lights of the Lexus (all use the same bulbs). I had previously replaced the front parking lights of the Prius with Sylvania LED's. I moved these to the license plate lights and installed these new Philips LED's in the front parking lights. Anyway, what a difference. I had regular Sylvania LED light bulbs. The Philips are so much brighter than the regular Sylvania LED's and way brighter than the stock incandescent lights bulbs. Plus these won't further damage the light bulb holder of the Prius license plate lights. These bulbs also made a difference when I installed them on the Lexus. Glad I made the changes to both vehicles. Sylvania has two different 168 LED bulbs, regular and the Super Brights. I have not tried Sylvania's Super Bright LED's so I'm not sure if they are brighter than these Philips but these are pretty bright and I like the whiter light. Plus these Philips were a better price than the Sylvania.

I’ve bought these lights several times for different cars and am very happy every time, very bright and works great.