8PCS 2020 Aluminum Extrusion Corner Bracket 20 Series Extruded Inside L Connector with Screws for 20mm Aluminium Profile Extrusion Rail

Very lightweight, and appears to be strong enough to get the job done. I searched and searched for good panel mount bracket for 20mm extrusion or 80/20 10 series extrusions and found nothing that wasn’t crazy expensive. I’ll definitely be buying these again.

The media could not be loaded. Honestly, these are pretty nice depending on what you're going to use them for. I'm going to use two to hold this small lightweight monitor up. But even with only one arm, they seem pretty rigid. Wouldn't leave it this way, and I'll be adding a second arm but these will definitely work. I like that you can lift the spring loaded handles and adjust their position independent of tightening the tensioning bolt. This made things so perfect for my application as it allowed me to mount the monitor closer to the machine enclosure without having to worry about handle clearance. Note, I did have to modify two of the alignment nubs (I had to remove them with a dremel) in order to allow me to mount them in the orientation I have them on my extrusion. Other than the few quirks I mentioned above, these are fairly nice, and since I'm wanting to move the monitor angle, the tensioning is plenty tight for my use.

Bought this I guessed it worked for his hack job project

These are great at the end of the day. Needed some work to fit properly though, there are some overmoulding spots that need to be ground down, and the relief in the corner is not deep enough to fit corner cubes, so you have to mill/file/grind them a little. Also every single hole needed to be tapped before anything would screw in, but they accomplish the goal after that.

Buy from these guys and Gals, great service and products

I experimented with lock washers and even added steel tubing to limit flexing of the internal fork. The leverage is just way too high with 300 mm extrusions.

These did great for what I was using them for. Thanks

Fits 2020 Seris Aluminum profile very well. Tried others from Amazon, they all stuck and cannot be used. But this one works perfectly! Good job, the seller!