Nilight Led Light Bar Mounting Bracket Front License Plate Frame Bracket License Plate Mounting Bracket Holder For Off-Road Lights Led Work Lamps Lighting Bars,Silver, 2 Years Warranty

This easy to install if you want to just use the holes for your license plate. In my case it’s a older Subaru so i wasn’t worried about cosmetics underneath. I removed the bumper because of the 3-4” of foam between the plastic and structural part of the bumper. I hollowed out part of the foam and added 2 pieces of 2x2 square tubing and welded it to the car then ran bolts through the bracket and attached it to the frame with the tubing as a spacer to increase rigidity. There are enough places for the bolts i ran to still have access to the factory license plate holes. I wouldn’t want to try to take the bolts out just to get to the #plate. Overall I am sure I went over board but... I is sturdy AF Obviously this is a light bar bracket and not a brush guard although it is sturdy its still a plate of steel that is bent at 90degrees. So if you are wanting something for additional structural support for your weekend adventures I can’t say that it will hold up to abuse. But as for a good option for a cool license plate bracket with or without lights it is awesome. It even gives a Outback a little bit of a aggressive look. For the price!!!!! Don’t hesitate it’s easy to install and looks great. You don’t have to go crazy like I did (I made it a 4hr project) This can be installed in minutes and will be suitable for most people. I just beefed it up because The Subaru is for playing on the weekend and it gets abused. On a daily driver just use your factory holes. It would have been nice if some rubber washers/spacers were included. I haven’t noticed vibration but as you can tell I tend to get a little over zealous.

Works as advertised although it does need some modification to fit USA license plate mounts - it took me about 3 minutes with my Harbor Freight angle grinder. It is light weight aluminum, but durable enough for it's intended use. I'm intending to mount a 26" lightbar. One issue i encountered is that my license plate mount has a forward leaning angle, meaning the "bull bar" part of this mount slightly obscures the front license plate. I tried bend the upper flange without luck - had i applied any more force i think it might have snapped or otherwise deformed.

I like this little bar, but there are a few things I would have liked to know before purchasing it. First of all, it's not universal since it won't fit if you have a license plate bracket. This can be easily fixed, however, with a few careful measurements and a power drill. I ended up mounting mine behind my bracket after drilling two accurately-placed 1/4" holes. It is now centered out and looks nice on my Jeep Liberty. It's easy enough to drill through the aluminum. If you mount this on a plastic bumper cover, I would recommend replacing your license plate/bracket screws with two similarly-sized bolts with locking nuts on the back side. I wouldn't trust this to hang on down the road when there's extra weight on it (with only the screws into thin plastic). The bolts are an easy fix. The coating on the bracket is very well done and feels like it will stay on for a long time. The aluminum is nice and lightweight, yet surprisingly rigid. I just wouldn't recommend putting too much weight on it, or it will probably bend. It's not exactly a structural piece like a traditional bull bar, but it will fit your smaller offroad lighting assemblies nicely.

Very easy to set up. Work like it should and stay in place wonderful. Worth the money.

I was looking for a light bar bracket option for thw front bumper of my 2020 impreza wagon. I found this option first. It being the cheapest and having good reviews I decided to give it a try. Thw product came fast and as described. Mounted directly to where the front license plate goes. Pretty sure the problem is just my car , there's no actually bracket or support in the reverse side of the bumper to be able to hold this product up. The screw provided were to large for my car so I used my own when those didn't work I tried longer ( about 3" ) self tapping screws. Keep in mind this is a new car to me and I wanted to avoid drilling any holes. The self tapping screws seemed to work for a minute . But in the long run there was no way to support this bracket on my car. It would've fallen off after a large bump. I decided to return it and just go the more expensive route. I ended up getting a rally innovations light bar which fit the bill for exactly what I wanted and needed. This nilight bracket seems great and I'm sure it is , with some slight modification at least.

This fit the bill for my needs. Mounted 2 4 inch lights on it for extra night driving visibility. It looks good as well. Easy to install

Subaru Impreza 2023. Instead of using the 2 pre-drilled license plate holes, I drilled in 4 holes that measure the 4 outside holes after reading reviews about rattling. And it’s nice and secure with the four, also used the bolts that the package came. I’ve gone 80mph on the freeway with no rattling. They look pretty cool and soon I’ll purchase the amber lights

Ítem does not fit recommended light bar. Neither in length nor the mounting bolts gage

ممتازة وصلبه وتركب على الصدام الامامي اف 150 2013 من فوق اللوحة

holds the 26" lightbar in place without problems. very well designed with minimal modifications (if any) on the car. delighted.

La barra tiene un kit de piezas para darle soporte, fue un poco más tardado de instalar, pero el resultado es totalmente satisfactorio, está hecha de metal, pero a pesar de ser ligera se siente bastante firme y bien hecha, sin duda una buena compra si lo que se busca es tener un soporte para spotlights, u otras barras led sin necesidad de tener que perforar o dañar la estructura del carro.

Très bon produit facile d'installation.

Very good finished product. Seller is very responsive 👍🏼👍🏼