12V LED Driver Transformer 15W 1.25A, LED Power Supply, 240V AC to 12V DC Transformer, Constant Voltage Driver,Low Voltage Transformers for Bulbs,Light Strips and Ring Doorbell

Flickering of my LEDs stopped and it's very easy to fit it. So now I can use the LEDs with out any issues and save some money by not using 50w led bulbs.

Its a perfect power supply for ceiling mounted LED strip light with no access to direct mains plug.

This transformer was purchased to replace a much older unit and worked very well. Regrettably it was one of three transformers used in the area and the LED unit attached lit a few nanoseconds later than the other lights in the room and switched off a few nanoseconds later than the others. The transformer was not at fault, but the most effective way of dealing with the problem was to remove all the transformers in the area and replace the 12V LED's with 240V LED's.

needed this for the under strip lights in the study - easy to fit and works great with the lights. Now it’s fitted it is tucked away nicely out of sight

The LED's stopped working on our heated bathroom mirror, the de-mister was still working (240V) so the transformer had blown. Sent for this and had the mirror back working the next day. Carefully follow the wiring instruction on the case next to the terminals and you'll be OK don't be fooled by the + sign on the blue plastic at the 12V side. Remember diodes only work in one direction and that's shown on the small diagram on the end.

used for L.E.D. down lights mr16.

Good price and it works as advertised. Bought it to tap into lighting circuit to drive multicoloured LED strip that I put into inside ledge on roof lantern I just had installed. It has been running for over 2 weeks with no issues.LED nice and bright with instant start-up and no fading or pulsating over time. Lighting supply is via switch not a dimmer.

Only used a few times a week and already stopped working after 1 month.

Ho acquistato questo trasformatore LED 60W per alimentare una serie di strisce LED e lampadine a bassa tensione (MR16 e G4) nella mia cucina. Dopo settimane di utilizzo, sono rimasto piacevolmente colpito dalle sue prestazioni.Punti positivi: 1. Potenza adeguata: Con un output massimo di 60W e 5A, è perfetto per alimentare dispositivi LED a 12V che richiedono una corrente stabile e sicura. 2. Compatibilità universale: Funziona benissimo con strisce LED, lampadine MR16, GU5.3, MR11 e G4, rendendolo estremamente versatile per diversi tipi di illuminazione. 3. Dimensioni compatte: Il design è compatto e leggero, facilitando l’installazione anche in spazi ridotti. 4. Affidabilità: Durante l’uso, il trasformatore rimane stabile e non si surriscalda, garantendo una lunga durata sia per il driver stesso che per i LED collegati. 5. Funzionamento silenzioso: Nessun fastidioso ronzio o vibrazione, anche quando è sotto carico massimo.Punti da migliorare: • Non impermeabile: Questo trasformatore non è adatto per installazioni in ambienti umidi, quindi è importante usarlo solo in aree asciutte o all’interno di alloggiamenti protetti. • Cavi di collegamento: I cavi forniti potrebbero essere leggermente più lunghi per facilitare l’installazione in alcune configurazioni.Conclusione:Un prodotto eccellente per chi cerca un alimentatore LED affidabile e compatibile con una vasta gamma di dispositivi a 12V. L’output stabile protegge le lampadine e le strisce LED, aumentando la loro durata. Lo consiglio vivamente per progetti di illuminazione domestica e professionale.Valutazione finale: ⭐⭐⭐⭐⭐ (5/5)Motivo della valutazione piena: Ottimo rapporto qualità-prezzo, efficienza e affidabilità.

Ich war etwas geschockt von einigen Rezensionen hier, weshalb ich besonders skeptisch war. Ich konnte nach dem Auspacken keine Verarbeitungsmängel feststellen und das Gehäuse selbst war erst gar nicht mehr zu öffnen. Die Platine war allerdings anscheinend nicht vertauscht. ;)Ich habe die ganze Installation auch eine Woche quasi im Dauereinsatz getestet. Der Trafo wurde nicht heiß , das Licht flackerte zu keiner Zeit und das Gerät macht keine Geräusche.Ich habe den "nobilé NV-Verteiler 6-fach Schraubklemmen NO-6968203006" angeschlossen, damit der Anschluss der LED-Spots einfacher war. Funktioniert mit dem Trafo wunderbar.Empfehlenswert!

Deze LED voeding DC 12 volt 5 ampère is goed gebouwd en heeft (in tegenstelling tot veel goedkopere exemplaren) ook een flink gewicht. Er zijn blijkbaar degelijke zware componenten gebruikt. Gemakkelijk aan te sluiten en goede afscherming van de connectoren. Ik heb er 42 watt (3,5 ampère) aan LED strips op aangesloten. De voeding wordt dan niet erg warm, maakt geen enkel geluid en levert een heel stabiele spanning. Over een te verwachten levensduur kan ik niets zeggen, maar voor nu ben ik zeer tevreden.

Zoals gewoonlijk: snelle levering (wat geen prioriteit was)Ik heb deze transfo gebruikt voor de LED verlichting in de veranda. Voldoet prima.

Perfecto