ARRIS (G34 - Modem Cable Router Combo - Fast DOCSIS 3.1 Gigabit WiFi 6 (AX3000), Approved for Comcast Xfinity, Cox, Spectrum and More, Maximum Internet Speeds of 1Gbps

Katastrophe, was dem Kunden hier verkauft wird. Das Surfboard ist für dem US Markt bestimmt, wird aber über Amazon DE verkauft. Das Gerät hat somit kein EU Stecker und lässt sich auch nicht bei den deutschen Providern registrieren.

This review is for the Arris Surfboard G34. I purchased this combo modem/router to replace my old one. When using Cox, note that you can't just plugin the new device and start using it -- you always need to call their technical support team to have them unregister your old device and register your new one. The setup process was easy and straight forward. The most difficult party was getting through to Cox technical support. My previous modem/router used DOCSIS 3.0 technology, so this upgrade gave me a 45% increase in download speed and a 366% increase in upload speed; all without changing my service plan. I saw lots of negative reviews for this device regarding the intermittent internet connections or the failure to connect to the internet. I have not personally experienced either of these issues. For buys who have this concern, if possible, I recommend retaining your old hardware for at least 30 days just in case you need to revert back. The product offers an optional mobile app to manage the network. The mobile app has very bad reviews. My recommendation is to configure your wireless network using your web browser first, then configure your mobile app after. Most of the negative reviews appeared to be from users attempting to perform the initial configuration using the mobile app. PROS: - Easy to install. - Fast wireless speeds. - Optional mobile app. - Modem and wireless router combined into a single hardware device. CONS: - The single LED status light makes it difficult to determine the state of the modem (see below). - When you rename a device using the web interface, those names do not carry through on the mobile app. FEATURES NOT ADVERTISED: - Free mobile app called 'SURFboard Central.' The mobile app allows you to see what devices are connected to your network, assess your network health, test your Wi-Fi speed, and even rename connected devices. The app was easy for me to use, despite the negative reviews. - You can setup a primary home network, a secondary home network, and a guest network. Each network includes a 2.4GHz and 5.0GHz SSID. COLOR CODES: - Solid Green LED: Indicates the Online status is in DOCSIS 3.0 mode. - Solid Blue LED: Indicates the Online status is in DOCSIS 3.1 mode. *This is the color you want to see. - Blinking Green LED: Indicates downstream and upstream channel search. - Solid Amber LED: Indicates the unit is powered on. - Blinking Amber LED: Indicates the firmware download is in progress. - Blinking Blue and Green LED: Indicates error mode in sequence. - Solid Light Blue LED: Indicates the WAN is selected over the Ethernet mode.

Update to further reduce stars after a terrible 10 days with this. Looking for replacement, as even with band steering off, tedious manual traffic management, this full-on chokes and loses all internet connection multiple times a day, for long enough that connection to work vpn and important teams and zoom meetings are lost. We get fast and decent coverage when it is connected, but it will inevitably glitch out at the worst times. We need a connection that won't drop out long enough to disconnect work vpn or lose zoom or teams meetings, and this seems unable to provide that. Our 400mps xfinity service is not the problem, as we hardly ever had noticeable disconnects with the old TG1682G - and those were traceable to a reported xfinity outage, not the gateway issues that are clearly down to the G34. That old TG1682G was replaced only to save on rental fees, and the G34 specs made it seem like a solid choice, but it is not. You can see in the xfinity app that the G34 is offline, and in wifi details on any and all devices. However, Arris seems to be working hard to make you think it isn't their problem. The light on the gateway will stay blue like nothing is wrong, and the dumb surfboard app makes it appear connected, shows all the "connected" devices, and shows good results in speed test, but that is only gateway-to-device. Just in the short time since this was purchased, Arris popped up a note saying their speed test is no longer available to test gateway-to-service-provider, so you see decent wifi speeds, but have no actual internet during these frequent hiccups. Set up with Surfboard app, plus Xfinity app, was no problem, and wifi distance is generally good. However, unlike the older Arris I rented from xfinity for years, this thing is much more prone to causing video meetings, work vpn, etc. to drop out briefly, but long enough that they fully disconnect. This glitching is mostly due to the band steering, I believe, and they do tell you in arris documentation that disconnections can be a problem if you select to have your 2.4 and 5ghz bands integrated and use the automatic band steering traffic management option. (EDIT, turns out this is not the only thing causing disconnects, every day.) It seems really stupid in this day and age to not have decent band and channel management from a gateway like this. It is so frustrating that I can't have the benefits of automatic smart traffic management, and I've not easily found a way to override the glitchy steering for just one or two important devices. Instead, I've had to separate the bands and try to get the household to manage our traffic ourselves, to be sure I won't drop out of an important zoom or teams presentation. That's just crazy after my old gateway handled this fine for as far back as I can remember, managing not to visibly drop the connection while switching bands for laptops and portable devices that sometimes should be on 2.4 (better able to handle long distance from router, or not needing much bandwidth at the moment) and sometimes should be on 5.0 (more robust when close enough). I will also note, besides the band-steering drop outs, this gateway has totally lost connection with xfinity a couple of times in one week, with no outage noted by xfinity. That nearly never happened with the old gateway, and only when there was a noted outage on xfinity's part. (EDIT, still happening, all the dang time. So MANY resets.) After having more embarrassing dropped meetings and work projects in one week than in the last three years, I'm sad that the much older Arris gateway was much smarter than this G34.

Below is my original review. Arris made good on replacing the Surfboard G34 DOCSIS 3.1 Gigabit Cable Modem & Wi-Fi 6 Router (AX3000). I had spent time with Sparklight support confirming that the original one had stopped working. I reached out to Arris Tech Support and after 3 calls they were convinced it was a faulty device. I re-installed an older modem I had and sent back the original one (after getting the RMA and shipping label from Arris). The process went well and within a couple of weeks I received the replacement. Went through the setup and got everything setup. I'll see how long this one lasts. I thought it fair that I update my review since they did replace it. ----------- Original Review below ------------------------ Easy to install. Worked with my carrier Sparklight. Upgraded after finding that I had paid for upgraded service for several months but since I owned the previous modem, they didn't bother to tell me the older modem wasn't compatible with the service I was paying for. I purchased this modem/router for the upgraded service and the install was pretty straight forward. It worked pretty well for about 5 and a half months. I then had problems with the router. Did a factory reset but I couldn't rename my router to what I had setup all my "smart home" accessories to access, so I purchased a new router. Everything worked really well for about 2 weeks and then the modem started not connecting all the time. It finally got to the point that it wouldn't connect at all. Called Sparklight and they confirmed the internet service was working and the modem was not connecting. Supposedly this was the third Arris G34 modem with an issue for the day. Said it might be a firmware update. Unfortunately I rely on my internet connection for work so I'll be going to my nearest Sparklight location to pickup a rental modem. Funny how the cable companies end up getting you in the end. I feel like I wasted $200 on this Arris G34.

Briefly: this Arris G34 works! As my main concern was about activating it- this review is about activation process only. Activation with xfinity app was eeeeasyyy!!!! ( just online with their xfinity app for cellphone) no tel calls, no technicians were needed. And for technologically clueless senior it took about half an our maximum. I found all info I needed through my personal “best friend” - google :) After the modem connected and appeared in the list of local WiFi’s ( with names which are on the label of modem - 2 actually, one for each band- 2,4 and 5), so I first connected the cellphone from which I was activating( entered p/w) , for each bandwidth, then other family cell phones, then computers, then tv. Connections were soo easy. And everything seems to work just fine( better and easier than with our original old modem) I decided not to bother and just to have 2 different networks ( names) for each bandwidth , rather then unite them under one name, as it automatically chooses best frequency bandwidth) and I can see then which one is working ) Though I should really mention in this review that during 2 last days I had been prepared and trained well already for the activation of this Arris modem. Because my first attempt was an incredibly stressful experience with Motorola 8702 modem combo refurbished in mint condition( also bought on Amazon here).( which I happily returned today(the return window is very reasonable) It took unbelievable amount of time and energy, for hours chatting with xfinity assistant, tel calls to and from xfinity, finally appointment with technician, and all that circus was just to find out that this refurbished Motorola modem was just plain defective. We certainly could not sit without internet ( at this point our old Motorola modem and refurbished newer Motorola both did not connect) So, I just rushed to look on Amazon for a really new modem combo compatible with xfinity, ( and with fastest delivery !) ( and I was checking release dates for all modems - to have a fresh one) Found out that ArrisG34 was released not that far ago. That is how I chose new Arris G34 here. If I ordered this Arris modem combo as a first choice, I would not even know what other people can go through , and why some reviews are so negative. Though in my case - I consider it as a valuable experience, and I certainly acquired some useful skills through the difficult first attempt of activating refurbished Motorola modem. But how glad I am that it is done, and I certainly can relate to good reviews , when people bought good new product from their first attempt and therefore activation process was as it is supposed to be - easy and not long at all, though it took some patience and anticipation, when the light on Arris was blinking different colors , but finally stabilized in stable blue. Xfinity app is leading through all steps of activating , and half an hour max - actually for me it was a breeze. Oh, and I read that if you want to change the name of your WiFi network for something more fancy, better to do it by reaching xfinity , so that they do it, as their app does not give this option ( which did not bother me) Also I am glad that I did not install arris surfboard smth. app( did reading that it is useless and not needed, only could confuse) In my case it was really not needed. I used plainly only Xfinity app for activation, nothing else. So, that was review about activation process and initial impressions. I hope that our new modem combo Arris G34 will work reliably ! ( if not, I will most probably update this review)