Complete Golf Simulator Enclosure Package – 4K-Ready Impact Screen with Blackout Cage, Projector Mount, Frame Poles, Side Shank Nets | Indoor & Garage Practice | Easy Setup | 12-Month Warranty

The only review you need: There are a couple of minor issues I came across but for value vs cost, hard to find anything better, for that, this gets 5 stars. What I wanted: A golf “cage” with a good impact screen that fits inside a 9 ft wide garage space. This having an 8’4” x 8’4” x 5’ option was perfect. Also wanted something that has sides and a top to help contain mis-hits or bounces. Quality: The cage itself seems very sturdy, made from metal poles. The black material that covers the outside is a thin tarp material. The screen seems very quality, made of a rubbery material and should absorb impacts well. Instructions: As other reviews mentioned, the instructions were lacking a bit, but I went in knowing that and brought my patience. Key notes about the instructions: -Mostly go by the pictures. On the size I got, the instructions incorrectly said to add an extra piece on one of the poles you put together, but the picture was accurate. -I took heed to the comment I saw about not over tightening. Once there was resistance, I just did an extra half turn or so more. -The tarp was easy to put on and secured with velcro. -***When laying out the white screen, if laying out outside or in a garage, make sure you get the correct side up, the other side could get dirty. I made this mistake, had to flip it over, and the screen got a little dirty (I’ll use a steam cleaner later if needed). The side that has Velcro all the way around is the side that needs to be up and that you hit into. There is also a part of the screen that will end up being the bottom, this part will have Velcro on both sides of the screen (for the bottom pad to Velcro to later).*** -It’s nice that it comes with Pads for the back frame that’s exposed in the cage, but I’m not sure this will hold up too well. Initial test with a foam ball, I hit one that went perfectly into the Velcro and got behind the pad. You might need a second person to press the Velcro in from the other side to help seal the Velcro better…that was hard to do from just one side by myself. -Mine also came with an extra square black tarp that had no mention of in the instructions. I realized this goes behind the screen to help with light getting through the back of the screen. There also is a direction this needs to face. The bottom is the side that has NO loops for bungees. I put this on after I stood it up, using a step stool, no issues. -Definitely don’t nudge this right against a wall unless you have padding up. I’m not using the side nets, but I did install one side. Hard to explain how that needs to go, but I got it after a bit. It comes with 2 bags that can Velcro shut. You can put ziplock bags of sand or bean bags in these bags. They just act as weights to hold the net in place. Again, a couple of issues I could see coming up, but don’t let that deter you from getting this. The price point is great. And long term, if the tarp or screen wears out, I think the frame will last a long time, so I can just buy new screens or tarps and size them to the frame. Will try to add a photo later once I have my whole setup complete.

Easy to put together and good quality package. The instructions could be a little more detailed in how to attach the different panels as well as the orientation of the panels. My only complaint is that the pads that come with it are not really pads at all. More of a cover to hide where the panels come together. Actual padding to protect the frame from getting hammered with golf ball and ricocheting somewhere with in the space. I intend to add my own padding behind the panels to protect the frame and ricochets.

For the price you just can't beat it. I will tell you my main reason for selecting this was the fact that it had a projector mount. What I found out quickly was is that the projector I had did not have the capability to cover the screen so close. So I had to take off the pole and mount the projector further back. The type of short throw projector that you would need is around $3,000 from what I understand. I've had about 400 balls into the mat with no issues. Every now and then you will catch a metal frame and the ball will go bouncing around. It does have pads on the corners to help alleviate that though. I read the other reviews and it was very grateful for the assembly instructions. Took me and my son about 2 hours to get up and in position

I really wanted to rate it 5 stars but the instructions were really bad. It definitely prolonged the assembly but if you use the pictures and take your time it can be done in an hour or so. The actual assembly was easy except for the bungee cords. Compared to the rest of the process it was difficult. I think that is causing the only con- balls bounce of the screen pretty far. I contacted customer support and they said it will improve in time. I will update this review in a month or so. The quality of the product is extremely high. The poles are made of metal and are heavy enough that there is no need to weigh down the enclosure. The screen is much thicker and softer than I anticipated. This is one reason I’m optimistic the ball bounce back will improve. It does have a few wrinkles but these are slowly going away. I will update this later as well. It does come with a projector mount that can be attached to the enclosure or the ceiling. It is a really good quality mount, much better than the one that I purchased. If mounting on the ceiling it only extends to approximately 12 inches which will be sufficient for most situations. Overall this is well worth the price and more than makes up for the terrible instructions.

This enclosure is durable and of great quality for a home simulator setup. I purchased the 12x9.4x5 enclosure and it’s exactly what I was expecting. All parts were included and the instructions were very easy to follow (no tools needed) It even comes with extra parts and bungee cables for the screen and back material. The included mount is a huge plus as I just built a new garage and didn’t want to mount anything to the ceiling. Also very easy to set up. I did have a few questions though and the seller was extremely prompt via email and super easy to work with. Very happy with this product, and will be referring it to others!

This Complete Golf Simulator Enclosure Package looks great once set up and performs really well. The 4K-ready impact screen gives a clean, sharp image, and the blackout cage does a great job keeping everything contained. Assembly took a little longer than I originally expected, but it was manageable. I made a few small adjustments that really helped the final look and performance. I used wire ties at the top instead of the ball bungee ties to reduce bunching at the bottom of the screen. I also added sandbags behind the bottom of the screen and pulled it down slightly, which helped smooth everything out even more. Now the screen looks really good and hangs much cleaner. When hitting balls, it can be a bit loud when the ball hits the screen, but there’s no bounce-back, which is very important. I also have rubber mats in front of the screen, and that setup works perfectly.Overall, I’m very happy with this enclosure. With a few small tweaks, it looks professional and works exactly how I wanted. I would definitely recommend it to anyone setting up a home golf simulator.

Simple to put together, and not very expensive, so I'm keeping it and giving it a generally positive review. HOWEVER, the top crossbar along the back is very dangerous, and you need to install padding and a baffle across to protect yourself. I'm using long bungie cables plus velvet valances as a baffle, and have a 10" pad bungie corded around that bar. Had to use my grommet gun to create holes and secure properly. It's an OK product, given the price, but BEWARE that wedges will come flying back at you, and prepare in advance. This is not BS... I got hit squarely in the face, and I was incredibly lucky I only got some soreness... 1 inch either direction would have busted my orbital bone, busted my nose, or knocked out teeth. It happened so fast I couldn't react.

Love it, let's me golf anytime I want. No tee time required. Instructions could be a bit better, I did have to disassemble it one time cause I didn't realize that 4 of the corners had pads on them which are supposed to on the floor.

We love this sim enclosure. It fits perfectly in the garage and provides my son and his friends with hours and hours of fun. Well constructed. As an added bonus, when I had a minor issue, the company responded extremely quickly to fix the issue. Amazing customer service. Highly recommend.

4 hour solo assemble. Steps 2 could’ve been a lot more detailed. Overall great product

Good quality impact screen. Definitely does the trick. It wasn’t to bad to assemble although the instructions could have been a lot better

I’m very happy with this purchase overall. I gave it 4 stars only because the instructions could be better—especially when it comes to the bungee cords and attaching both the black back screen and the white hitting screen. Assembly took longer than expected because of that. Other than that, everything is excellent! The screen has a few creases, but I’m confident they’ll come out easily with a little steaming—no big deal. I was also thrilled that the enclosure came with the mount and bar for the projector, which was a huge bonus. I would absolutely recommend this enclosure to anyone looking for a quality setup!

I was hesitant to order this as the price is a 1/4 of other enclosures, I’m glad I did!! The quality is absolute top notch! Easy assembly and very well made. I had an issue with my screen, I emailed them and had a reply the next day, they sent me a new screen and were great to deal with! The customer service is amazing and they stand by their product, I would 100% recommend this enclosure. If you’re on the fence about purchasing this like I was, order it!!