Fanttik E2 Ultra Electric Screwdriver, Precision Screwdriver Set (Grey)

For the actual tool functionality portion of this kit, I give it 5 stars and for most people that's all that will matter. The bits fit into appropriate fasteners well and do not strip screws. It has adequate torque to handle anything I've thrown at it, assuming you're not trying to build furniture. This is an electronics set for for that I use it. It is very easy and the battery life is great for anything I've built. It seems durable and none of my bits have been chewed up or eroded.The primary compaint with this set is the storage system. It is very good, as long as it is never jostled, dropped, or knocked over. And unless you're extremely orderly with your kit and never transport it, you will eventually jostle, drop or knock it over. Every bit is affixed inside by a rotating, magnetized spindle. Any jarring of the device/container (such as transporting it in a tech backpack and dropping your pack on a desk) will knock the bits loose and leave them in a pile. Best case scenario is that you have to put all of your bits back into their proper spots which is tedious. Worst case scenario is that the bits get wedged into crevices and prevent you from turning the spindle or easily retrieving the bits that cause the jam. This is extremely irritating and a major design flaw in my opinion.Ultimately, I'm not going to deduct a star for that because in the long run it is a tool and I believe I should be reviewing how the tool functions, not how it looks or is stored. If what I wrote about the storage system would apply to your concerns, knock off a couple stars because it is that bad.

I’ve been using this pretty much daily on controllers and motherboards, and I love it. It’s perfect for precision work where you need control without risking stripping screws.The size is ideal—small, lightweight, and easy to handle for long periods without fatigue. The electric assist makes a big difference too, especially when you’re doing repetitive work. It has enough torque for small electronics but not so much that it feels risky.The bits fit well and don’t slip, and the overall build quality feels solid. Battery life has been great so far, and charging is quick and simple.It’s one of those tools that just makes the job easier and faster. If you work on electronics regularly, this is definitely worth having in your kit.

So far, I’m impressed with the performance of this electric screwdriver. It’s compact, easy to handle, and the carrying case is well designed and comes with a lot of bits. The magnetic bit could be a little stronger, but it’s not a deal breaker. Overall, it has enough power to drive screws into wood with no problem. I'm not sure about the battery life but so far, I'm loving it!

Fanttik devices aren't bad, but I normally feel they lack power, or build quality. They have great designs, look good and flashy. They might work for unfrequent home use, but using them daily resulted in frustration and a worn out device before you knew it. I've been using this for a month now and it's been great. The bits are great, holding up to daily use. The driver itself hasn't worn out or slowed down. The housing mechanism hasn't broken. I'll come back and give you an update on it in six months.

I've accumulated quite a collection of precision screwdrivers over the years, both manual and electric, and this has quickly become one of the ones I reach for most often.I primarily use it for working on 3D printers, desktop computers, robotics projects, electronics, and other precision assemblies. The torque is well suited for M2-M4 fasteners commonly found in printers and PC hardware. It's powerful enough to speed up repetitive work but not so aggressive that you're constantly worried about stripping threads in plastic or aluminum.The bit selection covers nearly everything I encounter during printer maintenance and upgrades, from hotends and extruders to AMS units, motherboards, fans, and sensors. The magnetic bit retention is solid, and the bits themselves seem well machined with a precise fit that minimizes cam-out.The screwdriver is lightweight, comfortable to hold, and has good balance, making it easy to use for extended repair sessions. Battery life has been excellent, and USB-C charging is a welcome convenience. The case is compact, organized, and easy to toss into a toolbox or printer maintenance kit.One thing worth understanding is that this is a precision screwdriver, not an impact driver or high-torque electric screwdriver. If a fastener is seized or was installed very tightly, I always break it loose manually first, then let the Fanttik handle removal and reinstallation. Used this way, it excels.For anyone who regularly builds or maintains 3D printers, PCs, drones, RC equipment, robotics, or consumer electronics, this is an excellent addition to the toolbox. It has saved me a lot of time on repetitive disassembly while still providing the control needed around delicate components. Highly recommended.

This set is practically ideal — everything is well-designed and works flawlessly. I particularly appreciate the extensive variety of bits; there's a great selection, and every single one is practical and useful for different applications over time. The only slight inconvenience is the handle's thickness — it feels a bit too thin, though that might be an intentional design feature for precision work.Overall, I'm very satisfied with this purchase. I've only used it once so far for a brief task, but it left a great first impression. As of now, I definitely recommend it and consider the price fully justified!

Great little set. Screwdriver has multiple torque settings, and the bit selection is terrific. The bits are on the smaller size and great for finer work on small electronics. I use mine for PC builds. Magnetic bits make working with small screws easy. The storage case and rotating bit system is terrific. Lasts a long time on a single charge.

Good driver, lots of power and bits for most of what I need to fix. It's easy to use and adjust the torque settings, and the carrying case and organization is nice. The magnetic attachment is strong, though sometimes the bit sticks to the screw I just screwed in. Seems to happen on a lot of electric screwdrivers, so not really abnormal.That being said, the lowest torque setting (claims 0.05Nm) is way too strong. It always felt like it would strip screws when I used it to remove screws. At some point, it actually sheared several screw heads clean off on the lowest setting. Purchased 2 and had this issue with both, so I feel it's not just a defective unit unless I'm just that unlucky. I feel like the listing isn't being truthful here about the power, whether intentionally or not.I compared it to the E1 Max, which also claims 0.05Nm for the lowest setting, and that one feels much more in line with the power that I need for my repairs. The E2 Ultra is just... too strong. If you want something stronger, though, I guess the E2 Ultra would be just right. Just be careful when tightening phone screws...

Just enough power to actually be usefull but not too much so it doesn't strip stuff.Just small enough to fit where it needs to and has all the bits you actually need. Plus, you get a mini prybar!

very good

كولتي عالي ومنتج جميل

The screwdriver set is designed to be for electronics and claims to be a torque screwdriver, but when I got it, it would strip screw heads on the lowest torque value of 0.05NM which does not match how a torque screwdriver is meant to operate, for instance my other Fanttik S2Pro set on those same screws with 0.5NM would make an ugga dugga sound when torque value was reached like you hear from torque guns for mechanics, with this in mind I felt the need to return the driver because it was less suitable than a screwdriver 20x more powerful than this screwdriver, simply because The E2 does not stop turning bits when it reaches the set torque value. Other than this it is exceptionally powerful for its size, easy to use, has great battery life and a very creative rotary door style storage mechanism, very durable case but I have noticed that dues to the cases design, you pop it open with a press to the top, which I realised if you turn it upside down and give it just one small shake up and down, the whole storage mechanism including the driver comes falling out! This is not ideal at all and should have a way to lock the internal into the case, to stop this happening naturally as you carry it!

Perfect !