SVS SoundPath Subwoofer Isolation System, 4-Pack

Exactly what I needed in my bedroom with faux hardwood floors (laminate) that creak and sound like the downstairs ceiling is about to split open. The house was built in 1988 and I weigh 176 lbs. So, it's not me breaking the floors. I had a feeling getting a 12" Polk PSW12 paired with my surround sound setup upstairs in the master bedroom would probably rattle the ceiling for anyone chilling in the living room trying to watch TV (older and weaker sound system muahahaha). Figured I wouldn't mind the wife yelling at me or texting me to turn the volume down. Two or three times, no problem. Then, I'm trying to watch John Wick one night. Marilyn Manson did a killer job with the soundtrack to a bad*** movie. Well, with the heavy bass notes and drum beats dropping nearly the entire movie which I thought was awesome...I had to turn the subwoofer completely off and even adjust the individual channel volume of my Elac B6 rear surround speakers, DefTech ProMonitor 800s for the middle down-firing Dolby Atmos ambience (worth every minute of my research and every dime spent from my savings), DefTech 1000s for the top-front left and right surround speakers, as well as the Klipsch Reference RF-250C center channel beast. When she was finally satisfied with the level of reverb from upstairs, I found out later that the side-firing Polk PSW12 subwoofer was the primary annoyance. Can you imagine if I had gone with even a 10" down-firing subwoofer? She'd probably vandalize my speakers in my sleep! I love listening to music, movie soundtracks, and anything encoded with Dolby Atmos now that I have my setup...but I can't crank her up unless my better half is running errands, working, out of the house, etc. Thank goodness my 8-month-effort in 2016 building-out this Dolby Atmos 7.1.2 man-made hasn't gone to waste! I came across these sound / bass dampeners after I left reviews for the speaker system I ordered last year and read the reviews. Compared the ratings to the cheaper and more expensive brands, but had a hunch these would do the trick for my subwoofer driving my wife nuts. Worked like a charm. Enhanced the bass so I can hear the notes more clearly from within the bedroom, but it's about as loud downstairs as someone tip-toeing around on the laminate hardwood flooring. Noticeable, but her Polk PSW10 - 10" sub now annoys me more often than I annoyed her. Gonna have to get another set or two =-D Applications: Side-firing subwoofers, down-firing subwoofers, 12" or 10" in size - doesn't matter. Even loud floor-standing speakers will benefit from a set of these babies. I think I'll put some under my computer which rests on top of a laptop cooler and my Pioneer Elite receiver - adequate ventilation. Conclusion: Great invention - the material and design are quintessential to the top notch end result post-installation. A foam or synthetic rubber pad under the entire surface area of the sub would not have worked as well as these dampeners. Take my word for it. I installed DynoMat inside cars and trucks in my teens for the sound-enhancing, reverb and vibration reduction / elimination effect they provided people with upgraded sound systems who reported rattling sounds from their inner car door, dash, or trunk lid / pickup truck bed resembling silver bubble wrap style sunshades for cars

Bought these "Like new in Open-Box" from Electronics Expo (on Amazon) and they arrived in 2-days in a box that appeared to be sealed and brand new. We had also recently had our Polk subwoofer die so got a replacement Klipsch SPL-120 which advertised itself as having "Shock-absorbing rubber feet". Yeah, I guess but all I know is our room was rattling even more now than with the old subwoofer. So spouse has me off hunting for ways to stop the rattling. I looked at other cheaper rubber options for half this price, but they were all smaller and more multi-purpose.....so I bit the bullet and bought the highest rated (and highest priced) option in the hopes of fixing the problem the first time and not having to pull an 80 pound subwoofer back and forth replacing feet multiple times.. Well upon opening the box, I was immediately happy I had done it because these were heavy and substantial. Once I saw how tiny and insignificant the Klipsch factory feet were compared to these, I know there would be improvement. Note - these only ship with one size screw.....which did NOT fit my Klipsch.....so don't throw away those screws on the factory feet (they looked exactly the same but just different screw pattern). 5-easy minutes later we could instantly tell a more focused bass sound and probably 75% less rattle on wall-mounted picture frames and coffee tables. Yes, I still had to go put some felt pads on a few picture frames to completely eliminate the rattle, but these are great and no regrets. Threw the old feet in the box these came in, and if I ever upgrade subwoofers again, I will save these for my next subwoofer and put the factory junk back on. Great seller sending a likely brand-new product at discount and good product experience.

I have SVS PB-1000 sub and really enjoying it. However on average or even below average volume of listening level I was experiencing unpleasant vibration effect. You might feel vibration of the floor, wall and everything attached to the wall (wall clock, lamp fixture, picture frames). I did try to put some rubber insulation under the sub and it helped in some way but after a while those pieces of rubber got jammed because of constant weight pressure from the unit. Finally I decided to try SVS SoundPath pods and after installation I was really impressed - OMG! WHAT A DIFFERENCE IT MAKES!!! The vibration effect is almost gone but the main thing is the sub sound much cleaner, tighter and sound quality of the entire system very much improved. I don't know why these insulation pods are not a stock standard equipment at least with SVS subs. I think if it was an original accessory and the price of subwoofer would be higher that is still worth it and will put all other brand competitors way behind just because of this attention to detail thought and would bring SVS brand presentation in a different better level. Regarding installation - very easy, quick and smooth but for some reason the screws that came in a package a bit long. There are 3 sizes options and all of them were too long so a have to use some rubber washers to make it right. It is not a big deal but something was not expected because these products are sub and pods from the same manufacturer. This is my personal opinion but I suggest you to try them and see if it would work for you otherwise just send back but I do not think you will return it

The SVS SoundPath Subwoofer Isolation System effectively decouples your subwoofer from the floor, reducing vibrations that can muddy bass performance. Users report tighter, cleaner bass and less room rattle, making it an excellent choice for improving sound quality in various setups.

These SVS isolation feet are amazing, mount easily and work VERY well. I use them with my Klipsch R-120SW and the mounting was so simple. If you have a Klipsch subwoofer with stock rubber feet, just unscrew them and use the screws you already have which will marry your new SVS feet to your sub securely. All rattle and ambient subwoofer noise is gone except in the most extreme situations. The T-Rex scene in Jurassic Park and the door knock scene on The Haunting will still cause some noise if your volume is up, but those are not normal LFE mixes. This product is incredible and I'm so happy I bought them! UPDATE 11x19x25 I just got my second set of iso feet for my second R-120sw and I was able to listen to both subs, side by side, last night and it's like night and day. One sub with and one sub without was a hig difference. Today, I was able to mount the new iso feet on the new sub in the span of a commercial break during nxt wrestling. It's so easy and such a big improvement

Last Christmas I got a new subwoofer, and I got a lot of rattle along with the expected rumble. After the novelty wore off, it was time to search for a solution. These feet attach to the subwoofer and reduce the rattle (yes, it still rumbles!) The two things that keep this from 5 star are that the cost is a bit high for what you're getting, and the screws provided did not fit my Elac subwoofer. A quick trip to the hardware store remedied that with the correct size screws.

These were EXACTLY what I was looking for. I live in a townhome unit and some of the musical bass tracks can vibrate the floors in my unit. These rubber feet took care of that problem and gives the added benefit of letting to subwoofer have some extra thump without resonating. Great product. The enclosed fasteners/screws are 1/4" X 20 thread. If your sub uses something different you may need to stop at the local hardware store to get the correct screws. I use these on Klipsch 10" subwoofer X 2.

I love SVS and these work great. The only complaint is $50 for just feet for your subwoofer seem a little high but they do work great. If they were like $30 I would give them like 10 Stars but still giving a five star rating.