BEHRINGER ベリンガー MIDI FOOT CONTROLLER FCB1010 MIDI フットコントローラー

古いシンセ(DX7Ⅱ)のプリセットボタンが効かないところが数か所出てきたため、修理に出すか悩んだ挙句、これを購入。MIDIケーブルで接続するだけですべての音色呼び出しが可能になりました。おまけでエクスプレッション機能もついた。機能については満点です。値段がもう少し安かったらよかったので星4つ

デフォルトだと、ストンプボックスモードのようなものがない。つまり、エフェクトのON/OFFのような設定ができない（限定的にできる様子ですが）。 海外でUnOチップというのが販売されており、コレを組み込むとかなり高機能になります＾＾

Works well with mac mini m2, logic pro x, midi guitar 2/3 and Kontakt 7

This pedal does exactly what it says it will. I wanted to change to rack mounted effects and began by changing patches manually. The FCB1010 was recommended to me by a friend and has since been recommended to friends by me. It is a solid unit that has so far stood up well to live use and i see no reason to doubt it will last a long time. Programming is quick and easy and can be mostly be done standing or sitting. I say mostly because some of the global parameters require switching on the unit while holding a pedal down. It can control up to 5 midi units although i am only using it for 4 and the expression pedals can be set up to do pretty much anything that can be controlled by midi. There are also 2 1/4" sockets which can be used in place of normal "on/off" type pedals for things like bypass. They can be set to operate in several different modes although i dont use them, instead i have set a "bypass" patch. My only criticism is the size. It is a very long unit and that will be a deciding factor for some. For me it isnt a problem. All in all a great unit, well worth the price and should last for a very long time

I had read the reviews and knew what I was getting in to when I purchased this controller: it was going to be a crash course in MIDI programming and difficult for a beginner. Also, that this board is inexpensive, comparably, for all of the features you get. What I didn't know is that the stock firmware works just fine for my application, which is Ableton Live 9 and multiple guitar VST's. I ordered this board here, on 8-31-2015, I received the new model with stock FCB1010 Firmware version 2.5.1e, as confirmed by the free PC utility, FCBEditor. I spent a lot of time looking at the UnO and Eureka eproms. I may still get one of those at some point but, for now I've been able to get Guitar Rig 5 and Overloud TH2 working perfectly, with stock FCB firmware, Ableton Live 9 and with a Scarlett Focusrite 6i6 controller. Here is a must have utility for PC users: this free utility will allow you to program your FCB1010 without all of the pedal pushing on the board itself: http://host.mtnsys.com:81/faq-fcb/PCEditorBeta.htm - If that link is not working, search for - PC Editor FCB1010. It is pointless to try and program the FCB1010 from the pedals, when this utility gets it done much easier and faster. I use this with Windows 7 x64 and can't speak for other OS's. It's good to have two MIDI cables, in/out, for programming. Buy two if you have none, as the FCB1010 doesn't come with any. If you can't get the FCB1010 working with your VST's in Ableton: 1. Insert a blank MIDI track 2. Set the input of the MIDI track to the MIDI receiver for your FCB1010 - in my case Scarlett Focusrite 6i6 3. Set the output of the MIDI track to the separate audio track that contains the guitar VST you want to pass MIDI control to - in my case Guitar Rig 5 4. Set the MIDI track to IN - not Auto or OFF 5. Make sure the track that contains your VST audio track is armed/record lit up on track - Guitar Rig 5 track, record button lit 6. Tap dance your way through 100 amps - 10 banks*10 presets There are multiple youtube videos that will help you figure out assigning the expression pedals.CC# 7 for volume and CC#11 for wah is pretty standard. I'm not going to say this was an easy task, it took me 15+ hours to get things right, mostly because of old and outdated info and software out there on the web, but this was a very rewarding experience. I learned a lot that can be applied in many different ways. There are also a lot of useful mods out there, like powering the FCB1010 over the same MIDI cable, so you can have just one cable running to this board. And some more: https://www.youtube.com/watch?v=8m0v3Rr6f4U If you like a challenge and the satisfaction of being able to control any part of your VST's or DAW with your feet, you need the FCB1010.

La estoy ocupando con un tecladokorg oa700 y esta genial, ahora los cambios de fills los hago con el pie y no me distraigoaltocar en vivo. Genial

Good product,built well.I bought this to plug into my Chauvet Obey 70 to run my stage light show hands free.A little tricky programing at first but after that was done it works fantastic. I read its alot easier to program with a PC.