IMBZBK [Auto-Dust Removal] 3 Pack Screen Protector for Samsung Galaxy Z Fold 7, 3 Inside Flexible Film + 3 Front Tempered Glass + 3 Camera Lens Protector Accessories, Easy Installation

So i received this and installed these protectors 4 days ago now. Large Screen: First i put the large screen protector on. Watch the instructions and using the jig it comes with, application is incredibly easy and quick. I actually dont think i was ever able to put a screen on any of my past phones without any sort of bubbles but against all odds, it was perfect. I then had the phone open 90 degrees outside recording a video for about 15 minutes. It was about 20ºF outside. When i picked my phone back up and closed it, it made some absolutely horrible noises, i thought my screen was about to fall off. Turned out to just be the screen protector, it lets go along the fold when exposed to cold air. I'm able to push it back down, and for the most part it all grabs but i have some bubbles, but nothing i couldnt live with, winter is going to get much colder so time will tell how it holds up when exposed to much colder temps while in my jacket while skiing etc. Front Screen. The second screen i did was the front. The first hard shell i pulled out of the foam protetor had about a half inch (~15mm) hairline crack in it on the top edge. since i already applied the large screen protector, i figured i didnt want to deal with a return and went ahead with installation. its far enough off center where the bubble it causes to not interfere with the camera so i'm just rolling with it for a bit. I checked the other 2 screens and they did not have any hairline cracks. But aside from the first screen having a crack, it did apply perfectly and there are zero imperfections. Camera Cover This is the easiest piece to install, straight forward. Conclusion: So i only had my fold5 for about 3 days without any screen protectors before i received this product. Im assuming my front cover with a crack is a fluke and not the norm and my only concern is that large inner display and how it will perform in the cold. That being said i've never tried any other brands and never had a folding phone before so maybe thats just something we deal with. Also i know the camera on this phone is lacking, even compared to my S22 Ultra i replaced with this phone. I think i will be taking some test photos and then removing the camera cover to see if there is any change in quality. I couldnt give this a perfect score, but the price is good, considering you get 3 complete sets of 3 protectors and i do plan on using all these protectors and i might spend more time researching to figure out if the issues with the cold on the folding screen is universal or not. If it seems to be pretty common, i would buy this again.

These screen protectors are fine for the price, but don't apply well. I followed instructions as detailed in instruction booklet and video. The mold to hold the phone is non locking so when you go to pull the tab, it lifts up and gets air underneath even when I held it as described to do. I like that it is tempered glass, and the thickness will provide good protection. It was easy to install even though there were issues. The size is perfectly adjusted to the screen. The box also comes with microfiber, alcohol pads, and stickers for dust removal in a nicely packaged piece.

So, let me start by saying that the screen protectors work great. Just as well as any other on the market. Thickness is fine super clear visibility, and super easy to clean for install because it come with 3 sets of cleaning kits. I have yet to try the finger print reader so i am unable to speak on that but touch sensitivity seems goon and the installation tool is a real game changer and works phenominally. The only reason i give it a big fat 1 star is because i didnt just buy this kit to protect my screen, i purchased it because it also has camera protectors, it said they were for my phone a pixel10, and because of the game changing install tool however the camera protectors are for a different model with double flash so theres a border divider piece that goes right over my flash.

This screen protector for the I side went on well and fairly easy. Issue I have is it looks like it has a bunch of cracks or lines that are not normal on it the next morning. It doesn't look professional at all. I'm a stickler for a screen protector to go on straight and without flaws during installation. I followed the process to the tee. It's a nice setup, just think I might have gotten a bad package. Marble sat in the heat in a warehouse or on a delivery vehicle. It's a good kit, just a flawed protector. Too bad for me.

It's good, easy instructions to help you to put it on, especially with the applicator to help you with alignment. Why three stars? Because the privacy screen isn't so private like the others. One still can see from the sides...

Application of the screen protector was a breeze though I had a little bit of trouble getting the camera lens protector lined up straight. Any bubbles that appeared disappeared quick. Works flawlessly with my phone case. It does have privacy protection. The reason I am docking a star - my phone no longer registers my fingerprints, even re-entering them as recommended was painstaking as it failed many times due to not detecting my print (and yes I had the adaptive sensitivity turned on for the screen protector - I also tried it with it off just in case) and I had to keep restarting over to the point I only managed to get one re-registered out of the four I had previously registered but it still fails to recognize my print more often than not. So fingerprint unlocks are effectively disabled with this screen protector. Also, while there is privacy protection, the viewing range is still rather wide. I'm not sure if the privacy feature is what is interfering with the fingerprint reader. I would have to test this brand without the privacy feature to rule it out. I haven't dropped the phone or subjected it to scratches yet so I cant attest to the glass' resilience yet.

The screen protector itself might be good but the application process for the inner screen is designed to fail. They need to fix how you apply it & the tools you apply it with because none of it is working. This is why you get 3 in a pack. If you're lucky, you'll get the 3rd one to work but it'll take you at least an hour. The cloth puts dust on the screen & the dust remover adds smudges to the screen so you're having to go back & forth trying to get it right. Then when you finally do you put the screen protector on & press one part to hold it down then squeegee one side then the other but there's already dust stuck on the screen protector so when you stick it down even if you try to dust remove that sticky part it still will be there. Then when you squeegee you have to pull the underside out at the same time and hold it in place at the same time then make sure the removable underside doesn't get stuck underneath, which it does so easily, and then that causes more debris, scuffs & bubbles to get stuck underneath. It's so bad. Then when you have to peel it off to redo it, it so stuck to the screen it looks like it's about to peel the phone screen off too. Then when you finally get the ruined protector off, there's sticky smudges that take forever to get off even with the provided wet wipe & cloth. Also there's a total of 9 different screens that you get, but they only give you 3 application tool packs. There's no way you're going to be able to reuse 1 pack on 3 screens, especially since the first one alone has trouble doing it. It's a waste of time & money, I used the screens so obviously I can't return them yet I still have to find a different screen protector.

Good protector, but fingerprint basically does not work and at least very inconsistent. I modified settings, reset fingers, set fingers twice, and still I CONSTANT had issues. Now I am removing the protector. But was easy to install and was free of any bubbles.

Great

Just follow the instructions, every think will good.

Finalmente, un metodo intelligente per posizionare il vetro senza essere chirurghi...insieme vi viene fornita una gabbia fatta a misura del vostro telefono per poter posizionare il vetro senza problemi...davvero eccezionale

El filtro casi no oculta nada, tienes que girar el celular 75º para que se empiece a mostrar la diferencia, lo cual es un despropósito del producto. Tuve problemas con el lector de huellas; tuve que habilitar una opción "Modo protector de pantalla" para mejorar la sensibilidad, reiniciar el celular, y registrar 2 veces mi huella para que funcionara; la huella funciona el 70% del tiempo.

Really easy to put on, good quality