260pcs Black M3 Male Female Nylon Hex Spacer Standoff Screw Nut Assorted Kit with Plastic Box

A useful set of spacers. One thing though, the diameter of the screws is a little big for some breakout PCB holes. Will need to drill out the holes slightly to get to fit. Good quality all the same.

Nice set do the job I required and now can be safely stored away til needed thanks to the good case they are in

Ok

Very happy with the purchase... good isolation between pcb and any other metallic parts. Remain yourself, do not squeeze too hard 😁, this is plastic tread NOT brass.The parts are well finished and seems to be good enough too.

Good to have in the "bits" box if you are into electronics. Good value.

I ran out of screws to use, but had a metallic underscrew so I thought I'd pair it with one of the screws from there, the screw then proceeded to break, leaving me with the top and the bottom "leg" got stuck inside the underscrew, which isn't great. Unsure where those 5-star ratings came from but this is not a good bang for buck.The screws aren't as wide as the motherboard holes so in this case, you're forced to screw it tight, which might break the screw inside the underscrew and meaning you'll have to unscrew the whole motherboard again and replace it and try again. :) fun.

They are very good excellent I recommend it

I'm using these for mounting a Raspberry Pi 3, and other bits and bobs, in a plastic project box. However, the screw thread for these is wider than that of the Pi 3, so I had to use a tool to increase the size of the mounting holes on the Pi 3 in order to use these with it.

Produit conforme (pas de pb de filetage sur les qq pièces essayées comme mentionné par certains).Livré très bien emballé. Pas de risque que tout se mélange pendant le transport. Ca fera le taff

Top, alles was man braucht, gut verarbeitet

Kit comprato per un progetto che poi è cambiato in corso d'opera e quindi non è stato utilizzato. Pero sembrano buoni pezzi, vedremo in futuro come si comporteranno in caso di utilizzo

Muy útil para sujetar placas y asegurar su aislamiento. Las roscas ajustan bien y el acabado es muy fino.Un buen producto. Un consejo, no apretar demasiado fuerte las roscas ya que pueden dañarse, la presión resultantees lo suficiente buena.

Emballage soigné, boitier de rangement pratique et fonctionnel. Le nylon n'est pas conducteur (à nos valeurs utilisé...) et donc aucun souci lors de montages. Résistant, si on ne serre pas inutilement fort et cerise sur le gâteau, le colis arrive avec une journée d'avance.Très satisfais, je n'hésiterais pas à recommander.Merci.