Furinno TURN-N-TUBE TV Riser Stand, 2-Tier Small Elevated No Tools TV Stand, TV Console for TV up to 32 inch, 15.8 x 23.8 x 11, for Living Room, Bedroom, Dark Walnut

It is very small, can barely hold a 32 inch television, is extremely easy to put together. Would go a size about if ordering

I run a projection system in my living room ( Epson PowerLite Home Cinema 3010, Full HD 1080p, 2D and 3D Home Theater Projector with Integrated Speakers (V11H421020) ). We have a huge wall opposite the couches in which to project the image onto. The thing is, I am a greedy person (by nature aren't we all?) I often strive for the absolute biggest screen size possible, even if its only a few inches bigger than it was before. With these stands, it allows me to keep the components I used to have on an IKEA table that was 24" tall onto a pedestal that is only a hair over 10 inches... which allowed me to increase the screen size from 113" to 136" diagonal. I placed 2 of these tables side by side and it makes things look absolutely stunning in my living room. The center channel ( Polk Audio CS20 Center Channel Speaker (Single, Cherry) ) sits on top in the middle, flanked by game consoles and a wireless router ( Cisco-Linksys E3000 Wireless-N Router ) on the sides. It keeps everything low enough that nothing impedes the projected image on the wall. Somehow, without measuring prior to ordering, I was able to fit a standard Mid-tower PC case (protrudes from the back a bit, but I actually like it in there like that for ventilation purposes) and an Onkyo receiver ( Onkyo TX-NR709 7.2-Channel Network A/V Receiver (Black) ) into the space allotted, and they fit nearly perfectly. I am not sure if that was by design or I just got lucky... either way, my luck could now be a primary selling point for you, the reader! Assembly is super easy. The materials feel somewhat shoddy at first, but once its assembled it is solid. I am not sure I would put a 90 pound Plasma TV on top of it, but for a small LCD flatscreen it should do fine. The shelf surfaces are made out of thin particle board (1/2" thick), so I don't think these were really designed to hold much more than 20-30 pounds. I was, however, able to lean onto them for support when standing up and they supported that force for the split second I pressed down onto the surface. If the scenarios I described above fit your use case (or similar) you should definitely consider this table. I am going to post a couple photos of my setup, which looks incredibly clean with the devices situated on it. These inexpensive gems have propelled my living room into the next level of awesome.

Nice but tiny

… the size actually makes it a great budget “audiophile” media stand. It’s sturdy and totally usable as-is, but you can make it look a bit more high-end just by swapping in your own legs (I used hairpin ones that even came with their own little “isolation” rubber feet lol). If you go that route, you’ll want to grab a pack of plastic hole plugs—like five bucks here on Amazon—to cover the round holes on top where the original legs would normally go. I only needed one tier, as you can see in the photo, but I like that I can add more levels later if I ever need to. Honestly, it beats spending hundreds on what other companies call “media stands” that are really just the same thing: slabs of wood with legs. Only downside is the MDF is obviously cheap and the edges are a little rough but it still looks totally fine, especially for the price.

Those complaining about the small size obviously didn't check the clearly stated measurments. I knew this was going to be short and on the small side when I ordered it, so that was not a surprise. It's part of the appeal of "Japanese living room style" that it is designed for. Furniture that is lower to the ground and compact is very modern looking. This could certainly serve as a coffee table providing you have the furniture to coordinate with it. That said, because I'm pairing it with a large couch, the piece as it is would have been too small to fit in well as-is. I bought two of these and use them as end tables. In addition, I bought a third and I will add one shelf to each one, resulting in a four-tiered table that's an average height for an end table. I will have an extra shelf in case one gets damaged as the size on all are the same and interchangeable. I can't say enough about the ease in putting this together. As a newly single Mom, I'm really just learning to do things for myself (e.g., putting things together, etc.), and I really appreciated the excellent design and simple construction. Under my direction, my four-year old actually put this together (and had a blast doing so). If you add the castors (available separately), they look nice and it gives you a unique piece with a little added functionality. It also adds about two inches to the height. In spite of the simple construction, it seems to be fairly sturdy. These aren't heavy wood, so you're not going to want to put giant heavy stuff on them, but they're definitely not wobbly and cheap-feeling like some cheapo wood tables I have bought from Wal-Mart. Finally, the look: It's crisp and modern looking, and reminds me greatly of furniture I saw while staying in Brazil. It suits me perfectly.

The product was never 'delivered." The post office kept updating tracking with customer requested pickup which I never did. Amazon rep said tracking looked ok but two days later I found on USPS site that I literally had to go to post office to pick it up. This is first time I ever had this problem with an order. The item is too short for a TV stand. I have it sitting on 8 inch high box to get at height for decent viewing The item was very quick and easy to assemble and except for a tiny chip was in good condition. I have a 32" Tv that fits just right on it.

I bought this TV stand for our small stereo system. We used one level for the receiver, one level for the turntable, and one level for a very small CD player. Assembly was very easy. It does not have a high quality look to it - very basic, cheap laminate look. But it worked. For a while. We have had it set up since for 9 months. It has not been moved around or unloaded and reloaded. It has just been sitting there. Tonight I noticed that the support legs between the middle shelf and the bottom shelf looked a little off kilter. I took the stereo components off and investigated, and I found that ALL FOUR legs were broken. The plastic posts that screw on the feet had completely snapped off with no way for me to repair them. Completely unacceptable. I can understand a cheap quality piece of furniture breaking if you are hard on it or if you move it around, but this has sat perfectly still in a small quiet sitting area used by two adults. Inexcusable.

I needed a printer stand for my Epson ET8500 and couldn't find anything large enough. The Epson is a large printer and I wanted something that would allow me to store my printer AND my cricut maker 3 machine. By chance, I found this on Amazon whilst searching and since I really hadn't been able to find anything else that was even close to the size I wanted, I ordered. I wasn't expecting much with this, as the price seemed very low ($19.99). However, I have been pleasantly surprised. It is a perfect stand for my printer, and the Cricut fits beautifully underneath! It's very lightweight and was incredibly easy to put together. The edge of the table shelf had a small dent which had caused the wood to peel very slightly, but I didn't mind that at all considering the excellent low price and how perfect this was for what I wanted. It's not exactly a beautiful looking piece of furniture, but I didn't buy it because of how it looked. I did it to save space on my workspace, and it does just that. I am a happy customer.

This is the second one I have purchased with no problems at all.I think it is confusing to call it a stand they usually are called tv risers etc that's how I found these I bought.It was in great condition and a very strong unit.I bought it for my bedroom to sit on the dresser for my 32"tv and it certainly can hold a larger tv also.good buy for me.

Kupiłem ten stojak na przeczekanie. Potrzebowałem czegoś na szybko, by postawić swoje graty, a w międzyczasie miałem zrobić regał RTV na zamówienie, ale chyba dam sobie siana. Stojak jest bardzo mały, ale jak widać na zdjęciu mieści się na nim sporo rzeczy, w tym amplituner. Dodatkowo nawet spoko wygląda, montaż zajmuje dosłownie kilka minut i jest to tani mebelek. Nie liczyłem w sumie na nic, a dostałem fajny towar.

Probably the most value for money I’ve ever had from an Amazon purchase. Bought to house a hidden cinema system in a room with walnut furniture. Took 2 literal minutes to assemble and does the job perfectly. I was worried the walnut finish would look cheap but actually holds super well against other very expensive walnut furniture.

Parece de mejor calidad en las fotos. Pero hace su función y relación/calidad/precio no se le puede pedir mucho mas.

Léger et facile à monter