Tap Magic 10004E W/EP-Xtra - 4 oz,

This is the stuff. Period. Not quite like the old school Tap Magic with Trichloroethane in it, but close.

as described

At work I am constantly chasing threads and tapping holes, heard about this product, and had to try it. I will say, it works VERY well. Try it and you will see. Highly recommend.

Outstanding!! Preserved drill bits sharpness and produced nice drill holes in short under. Also helped in drilling and tapping 8 drill holes in enclosed trailer frame to mount four stabilizers.The down side in using this cutting oil..as with any drilling/tapping/cutting fluid….it will smoke due to dissipating heat. But it’s what this fluid dies…keeps the heat down and allows drills/taps to do their function.Those metal flakes from drill bits are hot!! And it’s to be expected.I am impressed!

The fluid worked great for drilling out broken bolts and retapping the threads in the holes. But it would be easier to work with as a gel since most just drained off the bit or tap. (But I was working on a vertical surface which made run off more of a problem). But, it did help and it did work!

Good product

I've always used a competitors product, but this product I will stay with. Great results when drilling with not so sharp bits.

Used to drill and tap over 100 M8 x 1.25 holes in 3/8” 304 stainless steel. Used a carbide drill bit and a high speed tap in a drill press. Finished the job with the same tap and drill bit that I started with