Question 1

Will this accept the typical (rectangular) 14/2 wire ?  (or must be round only ?)    thanks.

Accepted Answer

This is a product for low voltage use ONLY. It will MECHANICALLY accept such a wire -- I did so with a 14-2 wire rated for direct burial. BUT, the resulting seal was not really weather tight [I augmented the seal with RTV [silicone rubber from a tube] both outside and inside the box for a LOW VOLTAGE solar solar light].  This product would not meet code for 112 volt AC use and I would STRONGLY advise against using it for such an application.  I was using 14/2 because the solar panel was a long way from the light and I wanted a heavy conductor to minimize the voltage drop between the two.  PLEASE talk to a licensed electrician for advice on 112 volt wiring, ESPECIALLY when outdoor wiring is involved, to avoid dangerous and even deadly mistakes.  Be well.

Question 2

Does it work with 6 AWG wire?

Accepted Answer

depends on how many conductors and the thickness of the insulation. Per the description, this box can handle 5-12mm. 6AWG wire (no insulation) is just over 4mm.

Question 3

What is the diameter of the two threaded holes in the ends?  
I plan to use this in a dry location, so would discard the sealing fittings.

Accepted Answer

The unit is now buried in a snow bank outside so I can't answer directly, but it comes with removable yellow rubbery inserts of two different inside diameters for different sized cables. I was able to easily fit 12 gauge, two conductor [plus bare ground wire], UF direct burial cable into the unit, through one of the yellow inserts and then tighten down the black end cap for a "weather tight" fit. Since you are installing in a dry location, you could toss the yellow inserts to allow maybe a 1/2 inch cable to enter the box if  dust, insects and dirt were not an issue IF YOU SECURE THE CABLE MECHANICALLY OUTSIDE THE BOX so that there is no strain on the connections inside the box. The yellow inserts provide strain relief as well as weather proofing. [Also, because the UF cable has an oval cross-section, I covered the end with RVT silicon rubber to insure a weather tight sea in my application]     CAUTION: I used the device for low voltage signal cables -- I doubt it would be code compliant for 120 volt a.c. line voltage, and personally would not recommend it for such use as a general principle. For line voltage work, use an appropriate junction box with code compliant strain relief methods.  Hope this helps -- Be well.

Question 4

Can the connector terminal be removed from the box?

Accepted Answer

Yes, it’s not attached to the box. In fact, two of them we’re delivered with the box. Not sure how you want to connect the input & output leads.

Manufacturer	FX
Part number	JXHM6862USA
Item Weight	100 g
Product Dimensions	13.49 x 5 x 3.51 cm; 100 g
Item model number	JXH2JKJND
Size	1353.5 CM
Color	Black
Style	Compact
Finish	Painted
Material	Plastic
Shape	Square box
Installation Method	Screw-In
Item Package Quantity	1
Handle Material	Junction Box waterproof outdoor
Specification met	SAA, CE, TUV, IP68
Batteries Included?	No
Batteries Required?	No

FX Junction Box Waterproof IP68 2 Way Plug Line M20 Coaxial Cable Connector Wire Range 5 to 12mm Outdoor External Electric Power Cord Boxes

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions