Planet Audio AC1200.4 Anarchy Series 4 Channel Class A/B Car Amplifier - 1200 High Output, High/Low Pass Crossover, Hook Up to Subwoofer for Bass

What a little powerhouse! Absolutely worth every penny. Thank you Amazon for helping me get much better quality for not that much more money than I already spent.

I purchased this amp, as well as two full range speakers for the front doors, and woofers for the rear doors.This amp allows you to run high pass, full range, or low pass on all channels:(Channels 3-4 have a bass-boost)So I went full range on the front doors, and low pass on the rear doors.Knowing that I will not be pushing the amp that hard, I was able to connect the 12VDC to the radio power with 12GA. wire.Absolutely fantastic sound!

Not really much to say about it. This amp sounds really good, with no noise in the background. But with a 12’ Pioneer subwoofer that’s bridged, it will eventually shut off from getting too hot. Make sure it’s well ventilated and it should be fine.

While I can't attest to whether the amp actually puts out 1200 rms, I can say it stands up to wear and at least a year of abuse. I had this amp running two coaxial focal speakers (200 watt rms) and a 12" kicker sub (600 rms) for over a year in my car. The amp had relatively little breathing room and has yet to give out. I haven't had any whining either. Overall, for the price, it's a solid purchase.

I have it powering 2 6x9's and 2 6.5 inch kicker speakers. They sound great. No distortion. For the money i am really impressed how well this small amp does its job. No overheating issue and no high volume bass fade. Nice and clear through out the range.

You get what you pay for. Cons/negative; Overally rated.1200watt max? Yeah right! I was able to get 475-525 watt. Static and buzzing sound coming through the speakers. Pros/positive Had it for a year and still doing well. It does plays decent sound and tuning are understanding. I would get another one if the static and buzzing would go away.Using 4 mids range speaker (Orions Hcca 350rms and Apocalypse A67an 300rms) all are 4ohms but when wiring the pair to make an 8ohms bridging ( 62.5watt @ 8ohms x2 ) the 2 channel to prevent distortion and over working the amp. Amplifier Still make my mids pop for a cheaper route.

I have read a lot of reviews claiming over heating, shutting down or not being as powerful as claimed by the manufacturer. I know that at least two of the reviews I read for this amp were for a different product? I will usually rely on reviews but not for car amps. Regardless of the brand or power rating, a lot of people supposedly having the same problems as mentioned above. Here is what I know about this amp. I run it from a 100 amp 12v custom built power supply and have 4 x 8ohm 3 way speakers wired in series to channels 1 & 2 and a 15 inch dual voice coil sub woofer rated at 1200w 2ohm wired for 4ohm to bridged channels 3 & 4. I am using 8 awg power cables and 12 awg speaker cable. The amp doesn’t even get warm at a comfortable listening level. I have been running my system this way for over a year. I don’t believe build quality is so bad to justify all of the failure complaints. I couldn’t tell you if power rating is rms or pmp or whatever but I also do not think it matters. Impedance is critical so if you don’t know the difference between parallel and series wiring or what it means regarding the amp and speakers. Don’t try and fit it yourself.

purchased this amp, new jvc head unit, and 4 new kicker 6x8 speakers for my 2008 F150 truck. I'm very experienced with stereo installations. spent 4 hours running all the wiring. first ignition on resulted in popping and scratching noise from the LF speaker, then nothing from the LF, but all other channels working. checked LF speaker circuit, even though i knew i wired it perfectly, no problems found, except that now this brand new Kicker speaker ohms out at 2 ohms. It was 3.5 ohms out of the box. hooked the LF speaker back up, more popping/scratching, then nothing, then RF went down. Cycled the ign again, and front was completely dead, and rear channels producing some strange noise. NOT HAPPY. All wiring trimmed/taped/routed to perfectly fit this amp where it was located. Ended up having to disassemble everything i just put together, taking the amp out, and rewiring the speaker wiring for everything to run off the new head. I need to have hands free calling, and not going to wait for a replacement.So, in summary:1-ignored the many poor reviews describing similar issues.2-wasted an entire saturday installing, then having to uninstall everything due to this defective product.3-this defect ruined a brand new speaker, which i now have to deal with getting a replacement.4-having to deal with getting a refund on this product.5-forgot to mention that the blue planet audio logo on the front didn't light up either.It's my opinion to stay away from this product.

Excelente, llegó antes de tiempo y en excelentes condiciones...!!!

Made blow my speaker this a good amp for speaker but put 125 watt and morree to make it work perfectly

El día de hoy lo instalaron y no le funcionó el crossover

The amplifier arrived on time and in good working condition, but did not include the remote bass boost option ( nor the ability to connect one) specified in the description, and seems underpowered as compared to its specifications. I will keep it and use it for door speakers, but it does not have enough power to run a 10 inch sub bridged on channels 3/4, and a full range speaker box rated at 125 watts on channels 1/2. Moving to 2 OHMs and adding another sub may help.Sadly this was rated #1 on one of the amp review sites for a reasonably priced 4 channel amplifier.The low cost and the single 30 amp fuse should have been a dead give away.

Is this used I don’t like getting a return package that says it’s new haven’t installed yet it better work , maybe advertise that it’s an open package and offer a discount