French Cleat Hanger Heavy Duty 41 inch, 2 Pairs Aluminum Alloy Z Clips Brackets Heavy Mirror Mounting Hardware 500 lbs Load Interlocking Z Hangers Picture Hanging Kit for Hanging Mirror Picture

I have a 72”x72” painting on a wood panel attached to a wooden frame. It takes two adults just to lift it. I had it on traditional hangers and the wood frame would warp slightly and this heavy painting would come crashing down. Then I discovered this hanger. The 2-pack was handy and I used both. I used a level and a drill to install it. It was surprisingly easy to do. By offsetting the two halves slightly I was able to adjust the placement by an inch or so to either side to get it just where I wanted it. This is the sturdiest picture hanging I’ve ever seen. Rock solid. It would hold three times the weight of my very heavy painting. If you want to be 100% sure what you’re hanging won’t drop off the wall and maim someone or take a chunk out of your hardwood floor use this hanger.

These hold my mirrors like they’re nothing honestly. My mirrors are easily 75lbs each, not to mention my mirror by my front door has my neighbors front door located directly on the other side of the door from it…they have four children and let me tell you adults included their door is slammed hard several times a day…NEVER have I once been worried about my mirror falling absolutely NEVERRRRR! I made sure to install them properly, into studs with deep screws of my own, but these babies are secure as can be with all of the door slamming in the world up against them. Great buy!

These work awesome for being able to quickly shuffle around tool or part organizers. I doubt these would hold heavy metal garage cabinets without quadruple brackets on the back of the cabinet. I cut them to size for my organizer with an angle grinder and it took considerable time. Definitely quality metal (cross section pictured). I got everything lined up perfectly so I can slide the organizers over, no lifting needed to reposition them. One tip; if you do multiple cleats, do the top row first so you can hang it while fitting the bottom row and use a good level. Don’t forget you need approximately 30cm of top clearance so whatever you mount can be lifted up to be removed or repositioned.

These are amazing and worked perfectly to hang large art panels. It made the job easier and turned out perfectly straight. They are VERY flush to the wall.

I used a pair of these cleats to hang a large painting measuring more than 10 feet wide. The longer cleats work really well because they permit you to hit multiple studs. The holes are drilled to align with 16" studs which made attachment easy. I used very long construction screws to go directly into the studs, which is advisable. But the hardware also came with a nice assortment of plastic anchors and screws that would be useful for added strength in drywall or masonry. I was especially surprised to see they even included a mortar drill bit for an SDS hammer drill, which few homeowners are likely to have. This would make very quick work of any hard masonry. Once placed level on the wall, the cleat system permits considerable horizontal adjustment which making them strong, convenient and forgiving. This job would have been infinitely more difficult using anchors alone.

The screws for mounting the mount to the mirror were 3/4 inch long instead of the size on the package which said 1/2 inch making them unusable. Also, the screw anchors weren't compatible for 1/2 inch drywall making them unusable. Basically, I had to provide the proper fasteners for the install.

Simplified the install of my upper cabinets. It allowed me to do the install by myself

I was a little intimidated hanging something as heavy as an expensive custom floor mirror. After we had this delivered we decided that we would try anyway. Vacuuming and cleaning around the mirror wasn’t something we wanted to do weekly.I used the 30 inch cleat and was able to screw to the studs on the wall with just two screws. I used every screw hole on the back of the mirror out of an abundance of caution.I pre-drilled all of the holes to avoid splitting the mirror’s frame and the wall holes as well to make certain I was getting the studs. I didn’t use the drill bit that came with the kit, but it looks sturdy and will go in my tools.It was easy to install and I feel it will hold well. I was actually very impressed with the ease of hanging once everything was secured.This was my first French Cleat and I think I could use it for other things as well. The stud finder was an huge help and made me feel confident it will hold.