Adjustable Dual Scale Ratchet Torque Wrench 1/2in Drive

I already have a smaller torque wrench but needed a wrench which would allow a higher torque of 290Nm. Having done my research this NorTorque340 wrench was chosen. Upon opening the case it was pleasing to see that the wrench came with a Declaration of Conformance certificate showing that it has been tested and properly calibrated. The wrench has a working range of 60-340Nm and in the instructions you are advised not to change the dial outside of this range. I have now used this wrench to assist with tightening up after fitting new replacement brake disc(rotors) and pads and am pleased with the performance of this tool. I found that even though my older smaller torque wrench would have been able to work in the ranges required for this job I used the new wrench in preference knowing that the calibration on the new wrench was likely more accurate than my old wrench.With this new wrench I will now confidently tackle the next job which will require removal(Using a breaker bar not this wrench!) and refit of replacement hub-nut torqued upto 290Nm. The wrench is 68cms long and I estimate that you have 60cms of working length upon which you can apply a force so I believe that I will need to apply a force of around 50kgs in order to achieve a 290Nm of torque.(290/9.81/0.6)

Quality tool, works well, easy to use, used everyday since I bought it. Only downside is the scale is small.

Very good overall but it does have a few drawbacks. The scale is not the best to use and the plastic that the handle is made from is cheap and does crack easily. I've had a older sykes pickivant one which is near enough the same, the scale is a bit smaller but the handle is of better quality. If someone from norbar reads this spend that extra money for a better handle and a decent scale or just go back to the older design.

Feels well built and easy to read settings compared to my other ‘classic style’ wrench. Good solid click heard/felt when using. Considering buying another lower range setting to compliment.

quality product, although the scale having such a range you have to be careful when setting it, otherwise a great purchase

Spot on, feels good quality and was supplied with a calibration certificate

Brilliant. Bought to replace a Snap on torque wrench i've had for years. Nice clear scale and easy to use.

Very good. I have a nor at wrench from decades ago which has been faultless, expect to hand this on down too. Really nice tool and good value. Cal cert included.