4PCS Edge Banding Trimmer Replacement Blades, Premium Stainless Steel Woodworking Blade, Suitable for Wood, Veneer, PVC, ABS

This worked perfectly, trimmed the edge banding beautifully.This was my first time attaching edge banding, and I was concerned about trimming it, neatly without damaging the surface of the plywood. This made it super simple and very clean. As an added bonus, you can swap the blade around if the first one gets dull.

Fairly well made, strong blade. I like how you can spin it around and use the other side before replacing the blade. It takes some practice to use it well, so you may set up some test runs first. Try not to stop once you start pushing down the edge banding. And watch the pressure used: not enough and the cut may interrupt and cause a split or chip; too much and it causes indentation lines on softer wood and digs in too much. I found I had better results the more I used it and it saves a lot of effort (rather than just sanding it).

If you do edge banding, you need this! Although banding does come in different widths, you never get the exact size you need for a perfect match to your work piece. This trimming tool allows you trim small fractional amounts so the edging blends in perfectly. Very helpful in restoring or refinishing old/antique furniture. Thumbs up by me..

I bought a set of these and enjoyed using them so much that I bought another set for a coworker of mine. It’s such a simple tool that works so well for its intended purpose. The blade seems plenty sharp and hasn’t shown any signs of wear. I also like that it’s easily flipped with two screws to give you another set of cutting notches. I’m sure they can be resharpened with the right tools, but they’re inexpensive enough to just replace if they ever wear out!

Ok

Alot of people don't like this. I veneer cabinets for work now. And this one has alot smaller clearance than the ones at work we have. I can trim vaneer easier and closer to the top rail and side stiles. Be careful of the angle you approach your cut because the tip can dig into a painted stile or wood stile. Otheriwse it has made my job easier and more convenient at times.

It kind of worked. Peeled the extra off hut also scuffed the finish.

Working good) I’d like to buy additional blades if possible