Front Load Washer Tub Bearings and Seal Kit for LG & Kenmore Etc,Replacement Part 4036ER2004A 4280FR4048L 4280FR4048E(MAP61913707) 4036ER4001B- 5 YEARS WARRANTY by TOMOON

Fit perfectly. Very fast shipping. My LG washer was making a horrible noise on spin. My first thought was to buy a new machine. This product and a YouTube video saved me about $1,000.

Good fit. Exactly what I needed. Make sure that the shaft on the drum is not scared/rusted. The seal did not last because I had pitting. No fault of the parts my washer was just too far gone.

I’ve replaced hundreds of bearings in my career, these only last 6 months, incredibly noisy. The “ frequently returned” warning was not present when I ordered them. DO NOT PURCHASE THESE BEARINGS.

I’ve had these bearings installed for just short of a month and they have performed exceptionally!My LG washer is a bit over 10 years old and the original bearings and seal had never been replaced. The inner drum had quite a bit of free play and sounded like a fighter jet anytime the machine would do a spin cycle. Upon taking everything apart, I did find that the bearings were terribly damaged because the original seal had failed and let water into them. The spider assembly also had some marring, so I knew that I would need to do this job again with a new spider at some point. Given this information, I opened these new bearings and packed them with automotive heavy duty grease. From the factory these bearings don’t have much grease in them, so I would recommend doing this regardless. Additionally, I put the new bearings in my freezer while I finished preparing the drum for installation. Putting them in the freezer helped them fit right in with minimal mechanical persuasion.Overall, I am happy with the purchase and will update should the bearings fail. So far after a month, everything has been great!

Product arrived as described & in short order. Unfortunately I had to return it because by the time I got to that part, everything else was already destroyed. Returning said parts was hassle free & easy peasy.

Buenos

This was well worth the time. It takes a little time but it runs like new for $30.00.

My LG washing machine sounded like a freight train. Ordered this kit and took my time to install it correctly. My washer works and sounds like new now!Few tips, when you get the bearings, put them in the freezer. They will shrink slightly and be easier to install. When installing the bearings put a little oil on the outside of them to help with driving them in. Keep your olod bearings, clean them off good and use them to drive the new bearings in. Also put a little axle grease on the shaft and on top of the inner bearing to help keep it from seizing up and rusting. It also helps with installation of the drum. Put a little grease on the splines as well. And don't forget to put some fresh blue locktite on the stater bolt on the back of the motor. Also put a little vasiline on the drum gasket before you install it, it will keep it from fry rotting.Chang the drum bearings before it quits working. If it starts making noise it time to replace them. The longer you wait the more seized they get. If you are a diy type person then this won't be to bad. But you do have to dismantle the whole machine. There are some good videos on YouTube.